-
Please check to update the drivers for your graphics card.
Make sure the drivers for your graphics card are working. Secondly, check the connection between the display and the graphics card, clean up the dust or oxidation, check whether the connection cable has broken pins, you can also replace the data cable, and the connection between the graphics card and the motherboard, and whether the fan on the graphics card is working properly. If that doesn't work, press the adjustment button on the monitor to restore the monitor to its factory settings.
If none of the above works can solve the problem, it is recommended that you connect the monitor to another computer to test whether it is a monitor problem. Through the above methods, you should be able to find the root cause of the problem or solve the problem.
Or you can try reducing the refresh rate of the screen at the current resolution, which is usually set in its display driver. The steps are as follows:
On the desktop, right-click an empty space and right-click and select Properties.
In the Display Properties menu that pops up, select Settings Advanced Adapters.
In the drop-down menu in the Refresh Rate column, select Below current refresh rate.
value, click OK to exit, and confirm the selection as prompted.
-
Hello, because your graphics card driver version is too low, or the driver has been damaged, resulting in abnormal resolution, please update the graphics card driver, recommended**software: [driver life 2009], you can accurately judge your computer's various drivers and automate**installation, very convenient!
-
How do you adjust the computer screen when it gets smaller? The following will demonstrate how to set the computer screen smaller, I don't know what key to press, the computer screen will become smaller, can it be set back? Let's find out below.
The first step is to move the mouse to the blank space of the computer desktop, right-click the mouse and select "Properties".
Step 2: Click "Settings" in the pop-up box, move the scroll bar "Move Left or Right" in the screen resolution** until you feel fit, and then click "Apply" to see the effect.
Step 3: Adjust to the effect that suits your desktop and click "OK" to change the resolution.
The screen resolution ratio of the display is generally common, and it is estimated that the current use of 4:3, 5:4 should be less, and the more common is 16:9, and the resolution is as follows:
The screen of 5:4 adapts to the resolution of 1024], etc.; The 4:3 screen adapts to a resolution of 1536], etc.; 16:
10 screen adaptation resolution is 1200], etc.; The screen of 16:9 adapts to a resolution of 1080] and so on.
-
Laptops all have screen zoom.
It should be the fn function key. Mate f1
9. Function keys are varied
You can give it a try, I don't know what brand your laptop is The brand is different, and the settings of the function keys are not the same
But you can try my approach.
Hope it helps.
The reasons for the decrease in the water output of the pump and the treatment methods are: >>>More
I believe that many friends have encountered such a problem, the computer boot monitor has no signal, the host should run normally, and the fan is rotating. So what should I do if there is no signal on the computer boot monitor? How to solve it? >>>More
There are generally several reasons for slow boot 1Virus Resolution: You can boot into safe mode to run antivirus software for antivirus. >>>More
I'm not sure, maybe the white spot is mostly formed by dust or pressure in the backlight group. The LCD screen is made of a backlight"Illuminate"screen. Due to the low cost and technical content of the LCD screen, it is more likely to appear obvious unevenness in the corners.
The cause of the failure of the white screen of the power-on display. >>>More