225 60 R18 what tires

The meanings of these numbers are: 225 represents the tread width, the unit is mm, the width of the general tire is between 145-285mm, and the interval is 10mm; 60 is the flat ratio, which is the ratio of tire sidewall height to tread width, 60 represents 60%, r represents radial tires, 18 is the size of the tire, 18 inches.

If you're asking what brand of tires you have, you really can't tell this!

It is not possible to tell the brand from the data.

The meanings of these numbers are: 225 represents the tread width, the unit is mm, the width of the general tire is between 145-285mm, and the interval is 10mm;

60 is the flat ratio, that is, the ratio of tire wall height to tread width, 60 represents 60%;

R stands for radial tires, 18 is the size of the tire, 18 inches.

Pay attention to the tire pressure.

The tire valve cap usually pays little attention to it, but once it is lost, it will lead to slow air leakage, so that the tire will drive in a state of lack of air, which will increase tire wear, and the driving resistance of the car will also increase, which will not only cost more fuel and increase tire noise, but also the tire is more likely to deform when the vehicle is turning, which greatly shortens the service life of the tire.

Sidewall scratches are dangerous.

Compared to insufficient tire pressure and tread wear, sidewall injuries are much more severe than crown problems, especially bulges caused by broken cords, which can lead to punctures if not taken seriously. To avoid such dangers, one is to regularly inspect tires and replace them in time if problems are found.

Tread wear should be taken seriously.

When the tire brakes and starts sharply, it is easy to cause excessive local wear, which will cause some parts of the tire to be quickly smoothed out in the long run, shortening the service life of the tire. In addition to uneven wear, even with normal use, when the crown pattern is worn to a certain extent, the tire needs to be replaced in time.

The diameter of the 225 60 R18 tires is 18 inches, and the diameter of the 235 50 R19 tires is 19 inches.

Tire specification: Specification is the marking data of the geometric parameters and physical properties of the tire. Tire specifications are often expressed by a set of numbers, the former number indicates the tire section width, and the latter number indicates the rim diameter, both in inches.

The letter or symbol in the middle has a special meaning: "X" means high-pressure tire; "R" and "Z" represent radial tires; "One" means low-pressure tires.

1. The meaning of 225 60 r18 is as follows:

tread width (mm);

Flat ratio (tire height, tire width);

3. R: meridian structure;

Diameter of steel ring (inches);

2. 235 50 R19 represents the following significance:

tread width (mm);

Flat ratio (tire height, tire width);

3. R: meridian structure;

Diameter of steel ring (inches);

Kia K5.

The tires used are Hankook.

OptiO H426 225 45 R18 95V, load limit 690kg, speed limit 240km h. Hankook's H426 series tread is very fine, easy to get stuck in the stone rubber material is also relatively hard, the advantage is strong wear resistance, long life, reduce the cost of use, the weakness is the general grip, in the performance is not in place.

K5 uses avant-garde 18-inch wheels, the wheel style is sporty enough, and it looks very coordinated with the model, which has become one of the highlights of the appearance. The body as a whole is very sporty, with smooth and dynamic lines, 18-inch oversized wheels, and a tiger's roaring grille.

It highlights the bold and avant-garde design concept of the K5.

Korean cars have always been sold with high appearance and high cost performance, and the K5 is certainly not an exception. As a mid-cycle facelift, Kia's all-new K5 has a rearranged product line with two sets of appearances + three powertrains, a fashion version and a sports version.

And with a larger body size, it meets the needs of family mid-class cars. In addition to the temperament change of the streamlined appearance, the competitiveness of the Korean car with high configuration and high cost performance is also reflected in the new K5.

These two types of tires are 235 tires, and the cross-sectional area of 215 tires depends on the 20 mm, which is two centimeters. The 55 tires are larger than the flat ones of this 45 tire. Even from the side, the 55 tires look a little thinner.

17. This tire is smaller than this 18 tire and this diameter of this tire. This one is 17 inches, and the other is 18 inches, which is one inch smaller.

215 - tire width 215mm, 55 - tire flat ratio, that is, the cross-sectional height is 55 of the tire width, r - refers to the tire is a radial tire, 17 - refers to the rim diameter of 17 inches.

These two are not the same in terms of tire width, the first one is wider than the second, the wider the tires, the better, the wider the tires, the greater the friction when braking, the shorter the braking distance, in summary, the first tire is good, of course, it is also expensive, BMW X6 tires are 275 tires.

The outer diameter of the tires of the 225 45 R17 is not the same as that of the tires of the 225 40 R18.

1. Reason: The outer diameter of the tire of 225 45 R17 is centimeters, and the outer diameter of the tire of 225 40 R18 is centimeters.

2. Specific analysis:

The outer diameter is calculated as follows:

The tires are 17-inch wheels, and 1 inch is equal to centimeters.

The diameter of the 17-inch wheel is 17*cm.

Section height = 225 * 45% = cm, so the diameter of the tire is 2 * cm. 17 means the hub is 17 inches.