The BlackBerry Z10 doesn t look like it can be charged 5

The solution to the BlackBerry Z10 phone won't turn on:

1. After disassembling the battery, press and hold the power button of the phone for 8-10 seconds to see if the phone can be turned on normally.

2. Remove the SD card and SIM card of the mobile phone, wipe the metal with an eraser and reinstall it to see if it can be turned on normally.

3. Replace a mobile phone battery of the same model for testing.

4. Take out the battery, clean the metal contacts of the battery with an eraser and test.

5. It is recommended to use the original charger to charge the phone for more than 10 minutes.

6. You can reboot the phone to see if the logo can appear, quickly press and hold the left function key of the phone when the logo appears on the phone, see if the phone can enter the safe mode, and uninstall the recently installed application in the application manager until the phone is turned on normally.

If none of the above operations can solve the problem, it is recommended to send the phone to the after-sales service for customer service to test the phone.

Is it out of power, but if it doesn't work, it's only a flash

Did you solve it, mine is also this problem, the phone keeps restarting and can't turn on.

The battery of the BlackBerry phone cannot be charged, and it is possible that the battery has entered a dormant state. This is mostly caused by the user running out of power and the phone automatically shuts down. The solution to this situation is to remove the battery, wait 5 minutes, and then reinstall the battery.

Use a data cable to connect your phone to your computer, and after 30 minutes, turn it back on.

2.In the case of sudden mobile phone battery not charging, you also need to check whether you are using a regular original charger. If you are using a different charger, you need to check if there is a problem with the charger or if the charger port is damaged.

Switching to a new charger can solve this situation.

3.If there is a situation where the mobile phone can be connected to the charger to charge, but it is always not charged, I need to check whether there is a problem with the mobile phone system. Sometimes, you install battery management software that protects the battery on your phone, and when there is a problem with these software, the battery will not be fully charged.

You can use a universal charger to charge the battery of your mobile phone and check whether the battery is damaged. If the battery can be fully charged with universal charging, then you should repair the phone system or flash it.

4.The loose charging interface of the mobile phone and the short circuit of the internal charging circuit of the mobile phone will also cause the mobile phone battery to not be charged. In this case, you need to send the mobile phone to a professional after-sales repair network for maintenance.

5.In addition, the battery of the mobile phone that has been idle for a long time slowly runs out and leads to over-discharge.

Try it with a different charging cable, if it doesn't work, then most likely there is a problem with the battery.

Then find a place with wifi, try, the update time may be relatively long, if it doesn't work, it will become bricked, and it can only be brushed.

First, confirm what version of the BlackBerry Z10 in your hand, and then **ROM; The BlackBerry Z10 can be found on the outer packaging or in several manuals with the "STL100-1", "STL100-2" or "STL100-3" versions (because the phone is bricked at this point, it seems impossible to find it in the phone settings).

Three: The steps are as follows:

Turn off the BlackBerry Z10, that is, the icon of the mobile phone connecting to the computer is not displayed on the screen (the method of removing the battery in the BlackBerry forum has been tested and unsuccessful); 2.Connect the BlackBerry Z10 with the computer via a data cable; 3.After unzipping the ROM package of ** in advance, double-click the flash file running in it (the other one is the document introduction, don't care); 4.

After the flashing file is opened, it will display "connection to bootrom", at this time, press the power button and the boost button of the tuning button of the BlackBerry Z10 at the same time for about 5 seconds5At this time, the flashing starts, and the LED light in the upper right corner of the BlackBerry Z10 turns green (not flashing), and all you need to do is wait; 6.After waiting for about 4 minutes, the flashing is completed, and the green light of the BlackBerry Z10 goes out, at this time, you still need to wait, and after about 2 minutes, the BlackBerry Z10 is turned on and successfully regenerated.

Be patient during the flashing process.

goodluck！！！

1. It may be caused by insufficient power, you can connect the charger, charge it continuously for 20 minutes, and then turn it on.

2. It may be caused by the system abnormality, the phone can be turned off, press the power button and the volume down button at the same time, enter the recovery mode, click Restart, and try to turn it on.

3. If the temperature of the mobile phone is too high, the battery will be turned off for self-protection, and the temperature of the mobile phone will be lowered before turning on the device to check.

4. Any operation of battery feeding or system abnormality cannot be turned on, and you need to go to the corresponding customer service center to let the engineer help deal with it.