Before decorating the putty, what grassroots inspection and treatment should be done?

First of all, you need to determine what kind of materials you want to buy, in fact, in the process of decoration, buying materials is a key issue. Although it is said that the same money is spent on materials, some people can spend money to buy better materials, while some people use the same money to buy slightly worse quality materials, so this is closely related to the function you did before buying the materials.

Before buying these materials, be sure to ask the relevant people about these questions carefully, and say what you want to achieve and what the cost performance is, so that others can provide you with some better suggestions through your requirements. Then you can buy according to these suggestions in the process of buying materials, so that the materials you buy are relatively more appropriate.

In addition to these problems, in fact, one of the problems you need to face in the process of decoration is to constantly check the wall, because the most important part of the decoration process is actually the wall. The wall is also a very basic part, such a basic part, so that in the process of decoration, you must fully consider each part, what is its condition, and then according to these conditions to determine what kind of materials you use.

Therefore, before you wholesale materials, you must determine what the condition of the wall is, and then find the most suitable material for the wall。Because the materials used in the construction of each house are different, you need to determine which decoration materials you use in the end according to these different materials.

Check whether there are dry cracks and cracks that need to be repaired before scraping putty, if it is a plaster wall, brush the wall solid first, and the general putty workers will deal with it in advance, don't worry.

Before decorating the putty, it is necessary to keep the wall clean and tidy, and not to fall a very thick ash.

Before batching putty, it is necessary to carry out equal work to ensure that the wall is flat and free of collapse.

Before brushing putty, be sure to do a good job of leveling the wall.

It is to see if the wall is flat and whether there are potholes, and then paint.

Before decorating the putty, the most basic and minimum things still need to be checked.

We need to do a lot of preparation work before decorating the putty.

Summary. Scraping putty does not need to be done after plastering the interior walls. The inspection form is indoor plastering, and the inspection batch is naturally used in the indoor general plastering quality acceptance record form, which is not hidden. There is no need to conceal, the main thing is to check the flatness.

After the interior wall is plastered, the putty is scraped Yanfeng, do you want to do any information? Be specific. The inspection form is: indoor plastering and plastering. What is the inspection batch used for? Do you need to hide with a shiver? Which is used for room renovation putty powder inspection batch?

After plastering the interior wall, scrape putty without staring at the lead. The inspection form is indoor plastering, and the inspection is a good natural indoor general plastering quality acceptance record form, which is not hidden. There is no need to conceal, the main thing is to check the flatness.

Putty is divided into oily putty and water book quiet putty, which are used for paint and loose latex paint construction. Therefore, scraping putty is a water-based paint finishing project.

First putty powder twice, and then latex paint twice, all of which are water-based paint inspection batches? Yes.

Are you talking about delivery acceptance? If you need to pay attention to these aspects: 1. Water, whether it is water, whether there is leakage in the water pipe; 2. Whether there is electricity in the electricity and each socket, whether the lights are on, and whether the switch is effective; 3. Heating, if it is floor heating, it needs to be pressured test; 4. Whether the doors and windows are defective; 5. Whether the wall is cracked and whether there are cracks; 6. Whether the air conditioning cavity is reserved, etc.

See if there are any water leaks in the house.

As the saying goes, wall decoration is three points of wall paint and seven points of wall greasy, which can be seen that batch putty plays an important role in wall decoration. The so-called batch putty is to apply glue on the wall, and the putty can be laid after the glue on the wall is dry, which is easier said than done, and there are many precautions to be understood.

1. What should be paid attention to when lining putty for wall decoration.

1. Pay attention to the wall foundation before batching putty. For example, if the old house of the family is being renovated, the dirty things on the wall and the original base layer must be cleaned; If you are decorating a new house, you must first check the thickness of the original foundation old powder on the wall, if there are wrinkles, hollow drums and other uneven phenomena, you need to eradicate the original foundation of the old powder, do not remove the glue directly to treat such a wall.

2. After the foundation of the wall is treated, it is necessary to continue to prevent cracking on the gypsum board, plywood and wall. In all joints and wall cracks, it is necessary to enrich with elastic putty to ensure that the wall is seamless, and then large-scale construction can begin, and to meet the requirements of smoothness, the treatment of yin and yang angles should also be vertical and straight.

3. The selection of white cement, gypsum powder and other materials should be made of high-quality materials, which should be able to fill the gaps in the self-made putty, and the most important thing is to ensure the smoothness of the batch of putty, which not only looks beautiful, but also saves latex paint.

After making the above preparations and understanding the relevant precautions, you can start to batch putty. The first step is to use the ruler to catch up with the putty, the yin and yang angles should be kept vertical and flat by the ink line, this is the first step, not impatient, must be patient, slowly catch up; In the second step, when the first putty is completed, the second putty is followed to treat the wall, which makes the putty achieve a smooth and smooth effect; Immediately afterwards, it is the third batch of putty, which is mainly to check and fill in the gaps, find out the cracks and missing brushes, which depends on the side light of the bulb with a larger brightness to find and fill the gaps locally.

Second, is it okay to only scrape putty without painting?

First of all, you can only scrape putty and not brush latex for wall decoration, but I don't recommend doing this! Not only for aesthetic reasons, but let me tell you about the role of latex paint on the wall.

The plaster is easy to peel off the dust, and rubbing the clothes will leave white marks on the clothes. Applying a layer of latex paint can protect the wall, and the clothes will not get dirty when rubbed on, and sometimes the stains can be easily wiped off if you accidentally get them. Latex paint also has a certain degree of air permeability, and will not appear to bulge the wall due to the increase in summer temperature.