Why is there a gap between my barcode printer and barcode?

That's right, it's in the printer settings, you can set the size of the label. Your label may be much larger, which is why you have the effect of this, and you only need to change the settings to pull it

If the printer has less ink, or the print head should be cleaned up, select Clean Print Head in the print properties.

1. Label cutting is not standardized;

2. The tag sensor is broken;

3. There is no installation specification for the label paper, it is recommended to use a paper jam to jam the label paper after installing the label paper, so that there is basically no problem.

A barcode printer is a specialized type of printer. The biggest difference between barcode printers and ordinary printers is that the printing of barcode printers is based on heat, and the ribbon is used as the printing medium (or directly using thermal paper) to complete the printing, and the biggest advantage of this printing method compared with ordinary printing methods is that it can achieve continuous high-speed printing without supervision. The content it prints is generally the company's brand identity, serial number identification, packaging identification, barcode identification, envelope label, clothing tag, etc.

There are several possibilities for the landlord to have this situation1Label cutting is not standardized2The tag sensor is broken3

The label paper does not have an installation specification, and it is most likely that the label does not have an installation specification, and it is recommended that the landlord use a paper jam to jam the label paper after installing the label paper, so that there will be basically no problem.

Friends who often print labels may have encountered that there is no problem with the printing preview of labels made in batches with barcode printing software, but when printing with a barcode printer, there will be a problem of printing every other label, so how to solve this situation? Let's take a look.

If there is a situation of inter-sheet printing, first in the document settings of the barcode printing software, click on the printer properties, and see whether the paper size set in the barcode printing software is the same as the paper size recognized by the barcode printer, if it is not the same, change it to the same (the size needs to be set according to the actual size of the label paper in the barcode printer).

After setting up, print 2 labels in the barcode printing software for testing to see if there will be inter-sheet printing.

If there is still a problem with printing on the next sheet, it may be a problem with the printer's paper identification, press the paper key on the barcode printer to see if the paper is normal, and then do the printer verification. After the printer is verified, the label is printed with the strip printing software, and the barcode printer will not be printed in a row.

I suggest you try it out like this:

Take the 40*30mm label as an example, add barcode, text, **, ***, etc. to the new label document in the labelshop, and after setting the label content, the printing finds that the label is printed every other blank, that is, the printer does not automatically identify the size of the current label paper, and you need to manually set the label size in the printer preferences.

1. Set the size of the label in the printer preference is in the computer start menu (Control Panel) - Devices and Printers, select the label printer you want to use, right-click, and select Printing Preferences.

2. Enter the printing preference window, select the volume name in the page setup tab of this window: the same size as the original label size, if not, click the new button, and enter the label size in the pop-up volume window 40mm wide and 30mm high; and label low lining left and right margins.

3. If it still cannot be solved, it may be caused by other reasons, you can consult the after-sales supplier of the product, or relevant technical personnel.

There may be several reasons why the printer prints out a spacer white bar:1Your printer cartridge or toner cartridge may be running out of use, so replace it with a new one.

2.The head of the printer is not clean, you need to clean the printer's nozzle, and you can use some printer cleaners from the pre-auction industry to clean it. 3.

The printer does not supply the paper properly, it may be because the printer feed wheel is faulty, and it needs to be unpacked and inspected to replace the damaged parts. 4.Parts such as the transmission wheels inside the printer are worn out and need to be replaced.

5.The printer conveyor belt is slack and needs to be adjusted. It should be noted that in the process of operating the printer, you should be careful and cautious to avoid causing some irreversible damage to the printer.

The reasons why you have a good bucket mold and a spaced white bar may be as follows:1The printhead is not installed correctly:

If the printhead is not installed correctly, there may be white bars printed with spacers. In this case, the printhead should be reinstalled in time to ensure the print quality. 2.

Clogged print head: If the print head is clogged, there will also be a situation where there are spaced white bars printed. In this case, the printhead should be cleaned and maintained in time to ensure clear printing results.

3.Printing powder that is too old: If the printing powder is too old, there may also be a situation where the code is printed with a white strip at interval.

Therefore, it should be replaced with a new printing powder and empty liquid in time to ensure the printing quality. 4.Printer Setup Isn't Appropriate:

If the printer is not set up properly, there will also be a situation where there are spaced white bars printed. In this case, the printer settings should be readjusted in time to ensure the quality of the print.

Pro, the appearance of spacer white bars printed by the printer may be caused by the following reasons:1Defaced or aged print head:

The ink nozzle on the printing head may be clogged or aged due to a long time or improper use, resulting in uneven ink spraying, leaving a white strip that is quietly separated. 2.Too little cartridge or ink:

If you run out of ink or ink, the printer will leave a spaced white bar during the printing process. 3.Print Debater's Head Position Incorrectly:

Incorrect placement of the print head will result in spaced white bars when printing. 4.The paper is not of high quality:

Use inferior paper, because the quality of the paper is not good, the printing effect is not perfect, leaving a white strip of space. Solution: 1

Cleaning the print head: Use the printer's built-in cleaning program, or remove the print head manually for cleaning. 2.

Replace ink cartridges or ink: Replace used ink cartridges or ink in a timely manner. 3.

Adjust the position of the print head: Use the adjustment program that comes with the printer to adjust the position of the print head. 4.

Replace high-quality paper: Print on high-quality paper. If there is still a white bar in the interval, it is recommended to contact a professional printer maintenance personnel for inspection and repair.