Huawei phone fell into the water? What should I do if my Huawei phone falls into water?

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

If the mobile phone falls into the water, it should be turned off in time, clean up the water on the surface, and then put the mobile phone in the rice bag for 24 hours and take it out, and turn it on.

Then you can only go to your local Huawei mobile phone after-sales inspection and repair, so as to find out any cause that may cause your phone to be damaged and repair, unless you want to change to a new mobile phone.

I hope mine can help you, hope, thank you.

In this way, the mobile phone number falls into the water, he has a waterproof measure, and if you continue to take it out, it will have a mobile phone protection function, which can protect it.

Take out the battery, SIM card, etc. directly, do not use a hair dryer, dry or dry during the day, and put it in dry and breathable rice at night, so that for a week, and then try to turn it on.

Four-step workaround:

1. Remove the mobile phone from the water as soon as possible, and turn it off immediately. This is very important, whether the screen is black or not, please quickly shut down to prevent the motherboard from being burned out by short circuit, if you press and hold the power button to turn off, please press and hold the power button and the home button until the system shuts down.

2. Take out the SIM card, remove the mobile phone case and other objects, and use a tissue or cloth to remove the water outside the fuselage and in the crevices.

Wipe the SIM card as soon as possible after it is removed. Note that the headphones and power connector can be plugged in and blotted dry with a small cotton swab or paper towel strip.

3. Wrap the body with a towel or paper towel with good water absorption to absorb the water.

Don't use the method of throwing. Shaking will cause the water that has already entered the fuselage to spread, and it will come into contact with elements that cannot touch the water, causing even worse results.

4. If it is mild water ingress, you can wrap the fuselage with a paper towel, put it into a small bag of desiccant (often attached to food) while putting it into a bag, or you can put it into a bag full of rice, try to empty the air and seal it. Then put the whole set in a slightly heated place, such as a computer heat.

Note: Do not put it in a high-heat environment, nor do you use a hot air dryer to blow it, doing so will damage the internal components. Wait until there is no fog, it is best to leave it for another half a day, take it out, and naturally return to room temperature.

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

What to do if your Huawei phone falls into the water1. Fish out the phone as soon as possible and turn off the power as soon as possible.

2. Throw a few times at the side with more openings in the mobile phone (such as the data cable interface), or the side with a larger gap, and throw out the water in the mobile phone, but don't shake off the machine, the idea is to throw out the water in the screen. If there are water droplets left on the screen, there will be traces after drying, so don't rush to turn it on.

3. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry, or use a hair dryer to dry with cold water more than 4 cm apart.

4. Put the mobile phone in rice or related water-absorbing equipment to dry, and it is best to turn it on after 24 hours.

2. In the case of power failure, it falls into a non-corrosive liquid, and the treatment method:

1. Shake it dry hard, but hold on to the phone, don't shake off the machine, remember not to try to turn on the phone, even if the phone itself is not damaged, once turned on, it may cause the result of burning the motherboard.

2. If there is something left on the screen and it is very serious, blow dry and dry the phone, you can try according to the above methods.

3. Falling into non-clean water when energizing, or whether it is energized or not, falling into corrosive liquid or viscous liquid or other clean liquids, although it is the most troublesome, but the chance of machine recovery after proper treatment is also very large, the method is as follows:

1. Fish out the phone as soon as possible, turn off the power as soon as possible, and remember not to try to turn on the phone.

2. If it falls into corrosive liquids (such as seawater and other unknown liquids), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3. Clean with alcohol or professional washing water.

4. When it can't be handled, it can be sent to the nearest maintenance department for processing.

4. Check the screen, camera, and speaker afterwards to see if they are damaged.

5. Precautions:

1. It is not recommended that you take out the battery by dismantling the machine, one is that the disassembly time is relatively long, and the water has already been in contact with the battery at that time, which is of little significance, and the other is that although water inlet and private disassembly will lead to warranty invalidation, but private disassembly may cause more serious damage to the mobile phone than water.

2. If the screen turns black and you can't press the power button to turn on the computer, once the device is working, it is easy to have a short circuit and cause damage to the motherboard.

3. Do not use the hot air of the hair dryer to blow or expose it to the sun, which will cause the circuit board to deform.

4. Do not turn on the test frequently within 24 hours after falling into the water, and place it in a cool place for half a day to install the battery for testing.

5. Don't charge your phone if you think it can still be used after it gets into the water, it's best to check the waterproof label on the back of the phone.

If your Huawei phone falls into water, you should avoid using any buttons, and immediately take your phone to a repair station to open it to dry it and test it.

If it is only in a very short period of time, there is no problem, after all, the current mobile phones are daily waterproof, but if it is a long time, it will be sent to the after-sales service to deal with.

In fact, the mobile phone can be saved if it falls into water, it is best to unplug the battery immediately, after water removal and other operations, it can be used again in a few days, but what should I do if the mobile phone cannot be turned on after the water penetrates? Many people have tried the painful experience of water in the mobile phone, and the following will introduce to you the treatment steps for the mobile phone to enter the water and cannot be turned on.

Now mobile phones are more and more affecting people's lives, one of the sad things in the process of using mobile phones is that the mobile phone can not be turned on when it enters the water, and there are often people who shake their hands and drop the mobile phone into the water, I believe that this problem is a problem that mobile phone users have encountered. Don't panic, there is still a remedy, below, I will explain to you the solution skills of the mobile phone that cannot be turned on when it gets into the water.

What should I do if my phone can't be turned on when water gets in.

After picking up the phone, remove the phone battery as soon as possible.

Unable to turn on Diagram-1

Use an undusted napkin or cotton ball to blot all the water outside your phone that can be wiped off.

If you drop it into clean water, you can clean the phone with anhydrous alcohol, and the alcohol will volatilize quickly and volatilize the water on the circuit board. If it falls into the sewage, it should be cleaned immediately, and after the visible dirt is cleaned, the impurities attached to the pins of the component should be brushed off with anhydrous alcohol.

Mobile phone water inlet diagram-2

After disposing of the water that can be wiped dry, use the hair dryer to swing the phone to dry it from a distance.

Put the phone in a cool and dry place to dry for 2 days, and then turn it on to see if it can be turned on.

Unable to turn on Tu-3

If it still can't be turned on, send it to the repair shop.

The above is the experience of dealing with the water that the mobile phone cannot be turned on.

Shut down first. If it's a quick fish-out.

Can be wrapped in a paper towel.

Blow with a fan for a while.

It can also be inserted into a rice bag and left for a day.

If you are still worried, you can find a maintenance person to disassemble and check.

What should I do if my Huawei phone falls into water? The phone fell into the water, quickly fished it up, and used a hair dryer to dry the water. It's really not good, so you have to put it aside in the sun. If it doesn't work, you have to contact the manufacturer. There is another way, go to the mobile phone repair piece to see.

Take it out immediately and take it to the place where your phone is repaired as soon as possible. The current batteries are non-removable, and if they can be turned off, they should be turned off as soon as possible.