How much is the self adhesive die cutting machine, just ask the general, thank you very much!

It depends on what kind of self-adhesive you want to cut If you cut the coil material, thousands of pieces, if you cut a large panel, it does cost more than 100,000 If you are cutting A3 A4, there is manual feeding, only a few thousand If you want to automatically feed the paper, it is very poor about 8000 and relatively poor about 12000 These two kinds of noise are loud Automatic can be automatically fed but to be manually watched at any time may not feed the paper The cutting speed is about the same speed as 3000 The motor is a domestic stepper motor The performance is very low It is recommended to choose the 18000 of the Li Feng brand can automatically feed 50 sheets of A3 35 decibels The cutting speed is twice that of 12000 The imported servo motor has an Italian brand with similar functions The speed is faster than Li Feng's But the accuracy may not be as good as Li Feng's leftovers are also wasted more than Li Feng's The key is that ** is more than 40,000 If the equipment is broken, the parts will come from Italy The maintenance cost is high and the cycle is long.

Now the domestic ** is very messy.

Poor 5-80,000.

A slightly better 9-130,000 is not necessarily better than the above, that is, the advertising is more, and the high-pitched share may be okay.

A better 15-260,000.

Foreign ones are more expensive, not to mention.

Our home is from Shanghai Canpeima.

There are also 30,000 of them. If you specialize in self-adhesive, it is enough.

Hello dear I am very happy to answer your <>

Before starting the work, the self-adhesive die-cutting function of the test instrument can run normally, and the objects can not be stored on the equipment to prevent crushing the equipment or endangering its work, and the equipment should be often greased. When the self-adhesive die-cutting machine is repaired, adjusted, oiled, and maintained, it must be terminated, and the safety cover of the belt base machine and equipment must be opened and locked by pressing down. When folding and installing the template of the self-adhesive die-cutting machine, be sure to open the sail and maintain the setting, and carefully position the device to tighten the safety.

It is forbidden to destroy all kinds of safety and safety devices of the self-adhesive die-cutting machineIn the application of the die-cutting machine, it is necessary to follow the application safety guidelines, and it should be placed in the effective part when it is out of use, so as to ensure that the equipment is not destroyed and can also maintain the potential safety hazards of the person. Hopefully, the above can help you <>

1. Check whether the machine can run normally; 2. Check whether the blade is sharp and whether the steel blade has knife marks; 3. Check whether the front and rear rollers are damaged and whether the lubricating oil is normal; 4. Check the thickness of the dry glue material and adjust the cutting width of the machine according to the thickness; 5. Set according to the size required by the nuclear system to ensure that the size is accurate; 6. Determine the cutting speed and adjust it according to the actual situation; 7. Check the lap status of the dry glue material, and adjust it in time if you are not satisfied; 8. Put the dry glue material into the machine, the operator should stand next to the machine, and keep a safe distance when the machine starts running; 9. After completing the cutting, the cut dry glue material should be taken out in time; 10. Check the cutting results to ensure that the size is accurate, and adjust it in time if there is any deviation.

Self-adhesive trademark cutting machine (self-adhesive trademark cutting machine), also known as beer machine, also known as CNC die-cutting machine, is widely used computer-type bright die-cutting machine also called CNC die-cutting machine, compared with the previous tie rod die-cutting machine and the most primitive punch machine faster, full touch screen operation, more convenient operation, higher precision and higher efficiency of the product.