I ve been buying a car for four years, do I need to change the glass film?

No, the glass film *** is no problem if it is used for more than ten years, but if there are bubbles, it must be replaced in time.

It needs to be replaced, usually once every 3 years or so. Car wraps.

This is to use the film to improve the deficiencies of the window itself. 2. The function of the automotive solar film: In addition to heat and light insulation, it also has the function of explosion-proof, in case of accidents, the film will stick firmly after the glass is broken and will not splash and hurt people.

Hello. A good car film basically does not need to be replaced within 5 years;

Poor car film may need to be replaced once within 1 year;

Why is there such a big gap? Because of the poor quality of the film material selection and poor process, its glue, substrate, etc. are general, and even some unimproved "rough embryos", how can we ensure its service life, one year may have a significant decline in thermal insulation effect, accompanied by fading, blistering and other problems, affecting their sight and the beauty of the car, and its "store warranty", "lifetime replacement" is also a kind of "pseudo-commitment"; The most advanced technology and materials are used for automotive films, and the official can also provide a warranty for the corresponding time, such as Weigu heat insulation film, which is guaranteed for 5 years, including the decline of thermal insulation effect, fading, delamination, etc., it really guarantees you 5 years of use. Tips:

Try to choose high-quality car film film, with good scratch resistance, aging resistance, can be used for 5-10 years, the warranty is also reliable, paste once basically do not need to consider how long to replace the problem, compared with the inferior film of a year, it is undoubtedly more time-saving and labor-saving, and the good car experience brought is also priceless.

After the car glass is filmed, it can be removed and re-applied with a new film

After purchasing a new film, go to the local car beauty shop for construction, professionals will remove the old film without damaging the glass, and re-post the new film, and the owner only needs to pay the corresponding cost of removing the film.

It is necessary to go to a professional closed workshop to repair the façade film, because the process of film should try to avoid a dusty outdoor environment, and the film is usually applied in a relatively closed environment.

Precautions. 1. After the car is pasted with film, avoid raising and lowering the window within three days. Don't wash your car for three days.

2. If the edge of the film is blistered, it should be repaired at the construction point within 24 hours, and the treatment will be exceeded because the glue around the bubble has dried out, and the membrane can no longer move, and there will be creases during treatment.

3. It is forbidden to apply strong adhesive labels directly to the film within one month after the film, so as not to cause the partial detachment of the film from the glass.

4. Car film should also understand the vehicle inspection policies of various cities. For example, in some cities, the visible light perspective ratio of the front windshield and the glass outside the windshield for the driver's vision area cannot reach 70%, and the annual inspection will not be passed. When pasting the car film, the triangle area left in the front window can not be filmed, otherwise it will affect the normal annual inspection of the vehicle.

The first thing to choose is the film, and the high-quality car film needs to have the following characteristics:

1.Visibility is sufficient. Single-sided perspective can not be made airtight and opaque, and a high-quality solar film should have enough transparency to ensure that the people in the car can observe the outside of the car well.

2.Good thermal insulation. In the solar spectrum, the main heat is infrared.

High-quality car film can reflect infrared rays well, so that the temperature in the car can be reduced, and it can also reduce the burden of air conditioning and save fuel. Although the inferior car film has enough transparency, it can only make the sun's rays less dazzling but cannot insulate the heat.

3.Strong ability to block ultraviolet rays. Ultraviolet rays will not only harm people, but also aggravate the aging rate of car interior decorations. High-quality car film has sufficient ability to block ultraviolet rays.

Of course, the film of car glass can be replaced, many car glass films are used to block the sun, and the film will blister after many years, in this case, it can be completely removed and replaced with a new one, glass film.

Car glass film, of course, can be replaced directly, this should be if you feel that he needs to be replaced, this should be directly able to replace it.

Of course, the car glass film can be replaced, if you feel bad, you can go to three or four points or the car maintenance place has a special film. Just change it.

The car film can be replaced, the original film has shown signs of damage such as bubbles, cracks, ripples, etc., affecting the field of vision and normal use, it is recommended to replace it as soon as possible with the same color film on the vehicle driving license.

The glass film of the car can also be replaced, if the film is not good for a long time, or there are traces, then you can go to a serious 4S store to change it.

The glass film of the car sticker can be replaced, go directly to the car decoration store, he will remove the old film, and then re-paste the new film of your choice.

If you want to change the car glass film, you can go to the car 4S store to remove the original car glass film.

It can be replaced, but this needs to be operated by professionals in a professional place, you need to blow a corner of the car film with a heat gun first, and then slowly lift the car film from this corner to tear it little by little, and at the same time use a heat gun to blow the contact surface of the car film and glass, so you can continue, and pay attention to the heat when using the heat gun.

Of course, the car glass film can be replaced, if this feels a little old, this should be able to be replaced, this way, the effect of the film should be better.

The car glass film can be replaced, but it is best to find a professional to replace it in the right way, so as to achieve the ideal replacement effect at the same time, without damaging the quality of the car glass itself, so that the car can get better results in terms of maintenance.

In fact, the glass film can be replaced, because the film on the car, if you use it for a long time, it may cause your vision to be unclear, you can go to the four S store, and then ask them to change a film for you.

The car glass film can be replaced, and the service life of the general film is about 3 years, and it can be replaced by itself after the time.

You can buy the film online and install it in a physical store for free, or you can go directly to the physical store to choose the film and install it.

The glass film on the car, as if we glued a piece of tape above a certain position and can be replaced directly, but then we need to clean it up with some cleaning glue first, otherwise it will look dirty.

The car glass film can be replaced, if the glass car film has faded before, it can be completely replaced, and the sun film can be re-pasted.

The car glass film can be replaced, if the glass film is discolored, blistered or affects the line of sight, it must be replaced in time.

If the car film is used, if you want to replace it, of course, you can replace it. Just go to the car detailing shop. They will replace the old film and put on a new one.

Of course, you can, the car film can be pasted and replaced casually. However, car wrap is the best. Find some big brand *** products, don't look for too cheap products, too cheap products are prone to quality problems.

Of course, this can be replaced, if you feel that your current film is not good, you can replace the old one with a new one.

Can I change the car glass film? The film of the car glass is replaceable and can be replaced with your own favorite color.

It can be replaced, but it will be troublesome, and if it is of bad quality, it will be even more troublesome.

Can car glass film be replaced? Of course, it can be replaced, and it can be repasted after a few years, so it should be fine.

You can change it to a good one to make it cooler in the car.

Of course, you can change it if you want to.

How often to change depends on whether the film will be discolored, blistered, or cause too many scratches when lifting the glass. Generally, it is changed every three years or so, and once every five years if it is good. In order to avoid frequent replacement of the car film, it is best to pay attention to the following:

When cleaning the car film, use a non-corrosive neutral detergent, and the tool is a soft fine towel; It is best not to adsorb suction cups on the film, and stickers such as labels should not be directly attached to the surface of the film; Try to choose a high-quality car film with good scratch resistance and aging resistance. It can be used for 5-10 years, and the quality assurance is reliable. You don't need to think about how long it will take to replace it.

Compared with the inferior film that is replaced once a year, it is more time-saving and labor-saving.

Yes, but these require a professional to replace.

If there are scratches on the car film, you can choose to go directly to the 4S shop of the car to reapply the film.

Lifting the windows should be avoided as much as possible within 5-7 days after the film is applied (especially for new cars that have just finished the film), because the heat insulation film has not been completely fixed attached to the window after the film is just pasted, so the film edge is easy to grind and curl in the process of opening and closing the window, and the film that has not been fully bonded is also prone to displacement.

This kind of problem should be repaired within 24 hours to the construction site, more than the time will not be repaired, in order to the beauty of the film and do not affect the use, do not deal with it without authorization. If the lifting glass has been blistered and warped after a single part has been reattached, it may be necessary to check the door.

Car film purchase skills and precautions.

1. Choose a good light transmittance.

When applying the film, you should choose a solar film with good light transmittance, even if the color is darker, the scenery you can see should be transparent, not dim or deformed. Especially at night, if the light transmission is not strong, the driver's vision at night is not good.

2. Choose a high thermal insulation rate.

A good solar film should have a good thermal insulation effect, which can prevent ultraviolet ingestion, even if the sun is more toxic, it can also play a role in heat insulation, and it is best to take a piece of film to look at it in the sun.

3. Try to go to a regular car beauty shop.

When applying film to your car, you can't just go to the roadside car beauty shop, many places are very slaughtering, and the inferior film can be out of **. Therefore, it is better to go to the regular large-scale automobile sales beauty repair shop [Yuyan Automobile] with a good reputation, and the quality is reliable and guaranteed.

4. Wash the car in advance.

When applying the car film, washing the car can fully prepare for the film, and the car glass is not clean will affect the effect of the film.

5. Leave enough blank space for the left and right rearview mirrors.

When applying film to the front two windows, you should pay special attention to try it yourself in the car, and the film cannot block the driver from looking at the rearview mirror.

6. Pay attention to protection after the film is completed.

When the film is finished, do not open the window for 3 days, otherwise it will affect the film and sometimes cause the film to not be strong.

7. Choose a brand car film with guaranteed quality.

The above content reference: Encyclopedia - car film.

Yes, but these require a professional to replace.

If there is a scratch on the film, it can only be replaced, and there is no way to repair it.

The quality and construction level of the automotive glass film have great requirements, and the strict construction level can ensure the final result of the automotive film.

Usually the process of master film can be simply remembered as follows: from the instrument towel to keep it tidy - clean the glass - cut the film - shape the heat insulation film on the outer glass of the window-—— according to the shape of the glass, cut the corners - clean the inner glass - formal film-—— roll the water, blow the corners with a hair dryer - finally clean, etc.

There is no problem with normal regular decoration shops, and it is not easy to say about roadside stalls. It is easy to blow up the glass or break the defogging wire after the windshield heating.

There's a slight injury, that's okay.

Choose a good film, shading and insulation.

Well, go to the film shop staff to help you, the general car film can be kept for several years.

When buying a car, we all look at the glass of the car. Apply the film. Because of the glass film.

He can be very well insulated. For us. When driving in the summer, we can have a better environment.

So. How often does it change the glass film, three years or five years. Under normal circumstances, for the general membrane, he basically lost his role in about three years, so when it was three years, we needed to replace, of course, for other more advanced membranes, their quality and effect are better, and naturally they can use it for a longer year.

So. Is it three years or five years? This varies according to a membrane.

There is also a certain difference in the results. But in the process of changing the film, there are some issues that really need our attention. Let's take a brief look at it together.

First of all, the treatment of the old film, we want to replace the new film, then for sure. We need to tear off the old film. and dispose of it so that we can safeguard.

Our new film has a better adhesion. And to be able to really play its role and effect. Therefore, we must pay attention to the treatment of the old film, because many times, when the old film is processed, due to the incomplete treatment, there is a residue, which has a great impact on the new film, and naturally it has a great impact on us.

Secondly, the requirements for the film. We know. In real life.

This is similar to the foil unit. A lot. They are not the same in size.

The effect of the post is definitely not the same. Because. All the films need to be manually operated by the technician, if the technician's craftsmanship is not good.

The effect of his posting is definitely unsatisfactory, so for us when it comes to applying the film. We must be clear about our requirements. And they are strictly required to post according to their own needs.

Only in this way can we reduce the impact and losses caused by this process, so I hope you will pay attention to it.