When the new car leaves the factory, it will be covered with a layer of plastic protective film, whe

After buying a new car, the protective film should be torn off, because the protective film will be relatively dissolved under the sun for a long time, so as not to adhere to the wagon and be difficult to clean.

Try not to tear the protective film up, because this can play a good protective role, and at the same time, it will have a certain dustproof effect on the knee of the car.

The protective film needs to be torn off, and these protective films only ensure that some electroplating parts will not be scratched, and some may even affect driving safety, so the protective film must be removed.

A layer of white film will be applied to large areas such as the hood, roof, and trunk lid of the new car to prevent paint scratches and rain erosion. However, it should not be too long, otherwise it will end up on the surface of the paint when it is torn off.

Generally speaking, after buying a new car, you can remove the protective film of the new car on the day you pick it up. Otherwise, it is easy to retain glue after a long time, it is not easy to clean, and it is not easy to emit harmful gases in the car.

Some car owners are reluctant to tear off the protective film of their vehicles after buying a new car and want to keep it fresh all the time. This is not right. Because the raw materials of the new car protective film are generally bonded with phenolic resin, which contains a large amount of formaldehyde, which will affect people's health for a long time.

The smell of a new car is usually caused by plastic parts or protective film inside the car. Only by tearing off the protective film can the harmful substances inside be completely released and the odor in the car can disappear.

Things to note after buying a new car:

1.Tear off the protective film of the car in time, open the windows frequently for ventilation, and the car emits formaldehyde and peculiar smell.

2.Putting a bamboo charcoal bag or lemon or grapefruit peel in the car can help remove odors.

3.Do not open the window to wash the car within three days after applying the car film.

4.On-time maintenance.

Millions of car purchase subsidies.

Generally speaking, after buying a new car, you can remove the protective film of the new car on the day you pick it up. Otherwise, it will be easy to retain glue after a long time, it is not easy to clean, and the harmful gases in the car are not easy to emit.

Some car owners are reluctant to tear off the protective film of the vehicle after buying a new car, and want to keep it fresh all the time. This is not right. Because the raw materials of the new car protective film are generally bonded with phenolic resin, which contains a large amount of formaldehyde, it will affect people's health for a long time.

Odors in new cars are usually caused by plastic parts or protective films inside the car. Only by removing the protective film can the harmful substances in the car be completely released and the odor in the car can disappear.

Things to note after buying a new car:

1.Tear off the protective film of the car in time, open the window frequently for ventilation, and the car emits formaldehyde and peculiar smell.

2.Put a bamboo charcoal bag or lemon grapefruit peel in the car to help remove odors.

3.If you don't rush within three days after applying the film, you should open the window and wash the car.

4.Maintain it on time.

Although there is no aging problem in the paint surface of the new car, it should be thoroughly protected before use, because from the production area to the parking lot, the paint has begun to contact the air, and is attacked by rain, gray and sand, and begins to oxidize. Timely and correct maintenance will make the car's paint be well protected.

1. Open wax for new cars.

The first thing imported cars faced was the problem of waxing. Since most of the imported cars are shipped by sea, in order to prevent the erosion of seawater, sea breeze and sunlight in transportation, automobile manufacturers will coat a layer of protective wax on the surface of the car paint before leaving the factory, which contains paraffin, resin and Teflon and other materials, which can maintain a one-year protection and anti-corrosion for the body. Remove this layer of car wax, do not wipe it with gasoline or kerosene, choose a professional wax liquid or go to a professional beauty care store.

2. Clean the surface of the body.

If it is a domestic car, there is no talk of waxing. However, the first time to clean your car is best to go to the indoor dust-free manual car wash, or the car room with a better environment.

Some dirt is not visible to the naked eye, and chemical contaminants such as gums, alkalis, and acids should be completely removed. These dirts cannot be removed simply with detergent, and must be wiped little by little with special decontamination clay.

And don't wax casually on a new car. It is not advisable for someone to buy a new car and then wax it. Because the paint layer of the new car itself has a layer of protective wax, premature waxing will remove the original wax on the surface of the new car, resulting in unnecessary waste, and generally the new car does not need to rush to wax within three months of purchase.

3. Paint maintenance in daily car use.

In the normal use of the vehicle, car waxing and paint sealing glaze are more likely to be encountered by the owner. As a traditional item of car beauty, the role of waxing is first of all waterproof and anti-acid rain, and the protection of car wax will reduce the amount of water droplets attached to the body.

The second is to prevent high temperature and ultraviolet rays, and the film formed by waxing can reflect part of the light, effectively avoiding the aging of the car paint.

Secondly, the wax prevents static electricity and, of course, dust. The friction between the car and the air generates static electricity when driving, and the car wax can effectively isolate the friction between the car body and the air and dust. If there is less electrostatic car, there will naturally be less dust adsorption, and the car wax can also play a role in lightning, making the car appear brighter and new.

Regarding the paint protection film, there is a dragon film that is popular on the market now, 3M,G+ membrane, if you need it, you can take the test!

The surface of the car you just bought can be made into a protective film, which can better protect the car paint and make the car surface bright and beautiful. There are many kinds of protective films.

1.Crystal plating on the whole car surface, basically in many car protective films on the market, crystal plating products are more expensive, basically it takes about two to three times to do a crystal plating maintenance, but after doing crystal plating maintenance, the brightness of the whole vehicle will be greatly improved, and there is crystal plating can form a very hard protective shell on the surface of the car paint, even if you use a relatively hard thing to paint the car paint will not have very large scratches, generally speaking, the protection period of crystal plating is about three months in summer, and it can be longer in winter, about 4-6 months。

2.Car surface glaze. This bottle of glaze can be used many times, the car cost is slightly lower, basically many new cars will be made for you for free when you buy 4S stores.

But this protection period is very short, you have to do it very often, about ten days and half a month. In the same way, there is also scratch wax on the car surface, which is similar to the sealing glaze, which can make some slight scratches on the surface of the car not visible, so that the whole vehicle is bright.

Usually the cars we see at the auto show are very glorious, because the whole car is glazed before the exhibition. You can't just wipe out that brightness with a simple rag.

Car maintenance is to start with a new car, but not all products are suitable for new car maintenance. For example, when general products are made, they must be polished first, and most products, polishing products contain abrasives, which is the most taboo for new car maintenance. Because products containing abrasives are damaging to the body, we must choose safe, abrasive-free products, and pure natural is the best choice. The products of the Swiss luxury car care experts from Switzerland are always made by hand, where each jar of wax is blended and filled by hand without any mechanized production process, not only to maintain its tradition, but also because it is only produced by hand that does not affect the complex formulations and highly sensitive precious ingredients contained in Swissvax products.

SWISSVAX waxes break with tradition and eliminate the need for any abrasive process that can damage the body paint, making it easy, gentle, safe and long-term for any car owner.

The paint surface of the car that has just left the factory will have a layer of film, which is very high, very thin and very uniform.

The paint surface that just leaves the factory is not the same as the paint that goes to the 4S store to spray paint, and the production process of the original car paint in the car factory is much more mature and rigorous, and there is a layer of coating on the outside.

For the newly sold cars in our previous 4S shop, the owner asked if they needed to seal uranium, and we all suggested that they should seal uranium in the future.

When the white film is torn off in front of the customer, there are often new car owners who ask whether it is the most suitable to seal uranium now (because the owner feels that the white film has just been torn off, the paint surface of the car is the most complete, and it will be better to seal uranium), we recommend sealing uranium later, and the original paint surface is coated.

Uranium sealing is now the main practice of protecting the paint surface, and it is not cheap. It is required that the paint finish should be complete.

It has to be torn off.

1. Plastic bags contain substances that are harmful to the human body and affect the appearance of the car.

2. Many of the materials used in the interior and seats of the new car contain benzene carcinogens, and buying a new car is like brushing a new house, which requires long-term ventilation to reduce the content of toxic substances in the air in the car, but some car owners ignore that the seat packaging film will also release harmful substances.

3. Including the interior of the vehicle, the plasticized items are extracted from petroleum, which is a mixture of many chemical organic substances, and its components are generally harmful to the human body. When a new car is exposed to the sun, the temperature in the car will rise, and the higher temperature will increase the activity of the plasticized products in the car and release harmful substances to the human body.

4. Opening windows for ventilation is a more common "detoxification" method when the new car is driving, if the weather environment allows, the new car should open the window for ventilation as much as possible during driving. However, if the plastic packaging film is not sorted out of the car in time, it will not only continue to release harmful gases, but also block the emission of harmful gases from the packaged parts.

How to say this, it's still torn, poisoning is unlikely, but we can buy a cushion when we drive home, I feel that buying a cushion is better than the plastic film.

Hello car owner, I am happy to answer for you again, this is not needed, depending on your preferences, will not emit toxic substances, I hope my answer is helpful to you, if you still have questions, you can continue to consult me, I wish you a happy life, all the best. --Car Master is at your service