Can the mobile phone be pasted with hydrogel film and two tempered film?

Updated on number 2024-08-13
12 answers
  1. Anonymous users2024-02-16

    Tempered glass mobile phone film.

    It is a new mobile phone protective film launched in China in 2012, and it is a high-end new product with the most enhanced protection for the screen. The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage and scratches by external forces, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

    Disadvantages: 1. The tempered glass can no longer be cut and processed, and the glass can only be processed to the required shape before tempering, and then tempered.

    2. Although the strength of tempered glass is stronger than that of ordinary glass, tempered glass has the possibility of self-explosion, while ordinary glass does not have the possibility of self-explosion.

    3. The surface of the tempered glass will be uneven, and the thickness will be slightly thinned. The reason for the thinning is that after the glass is softened by hot melting, it is quickly cooled by strong wind, which makes the crystal gap inside the glass smaller and the pressure increases, so the glass is thinner after tempering than before tempering.

  2. Anonymous users2024-02-15

    The mobile phone can be pasted, the hydrogel film can be pasted again, and the hydrogel film can be pasted with two tempered films? There is no need, the mobile phone only needs to be attached to a film, and it is okay not to stick a film.

  3. Anonymous users2024-02-14

    If the mobile phone is pasted with condensation film, there is no need to paste the tempered film, because their functions are the same, as long as one is pasted, their materials are different, but they all protect the mobile phone screen from being scratched.

  4. Anonymous users2024-02-13

    The mobile phone should not be pasted with hydrogel film and then tempered film, because then the screen of the mobile phone will not be very clear.

  5. Anonymous users2024-02-12

    It is possible to apply two kinds of mobile phone films at the same time, but is there any point in this? There is no need to waste money aqui te amo.

  6. Anonymous users2024-02-11

    Absolutely. As long as there is no air between the two membranes, it is almost fine. But I don't know what the use of putting so many films is.

  7. Anonymous users2024-02-10

    Hello, the hydrocondensate film is mainly anti-scratch, and the tempered film is more anti-falling, but the advantage of the hydrocondensate film is that there is no white edge, and it makes no sense to paste the hydrocondensate film and then the tempered film, and the hydrocondensate film feels very poor when playing games, although the tempered film has white edges, as long as there is not a big problem with obsessive-compulsive disorder. Of course, if you want to stick two films together, you can do it. Hope to adopt.

  8. Anonymous users2024-02-09

    There is no need to paste two films on the mobile phone, not to mention the waste or affect the aesthetics and touch screen sensitivity, I personally generally paste that kind of soft film, the tempered film is too thick and the edge is hot, this all depends on personal preferences, don't buy too expensive tempered film, it is a change of name to make people spend a lot more money.

  9. Anonymous users2024-02-08

    Hello, Xiaohai, a home expert, is happy to answer for you. Pro, no, tempered film and hydrogel film can not be used together. Because for the mobile phone screen film, it cannot be pasted too thick, otherwise it will cause poor contact of the mobile phone screen.

    For tempered film and hydrocondensate film, the function is repeated, which can prevent scratches and prevent falling and breaking, so the tempered film and hydrocondensate film only need to be pasted one, and both do not need to be pasted at the same time. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation.

    Finally, I wish you good health and a happy mood!

  10. Anonymous users2024-02-07

    1. The paste can be pasted, and it is estimated that the paste is not firm, but it is not necessary, because the tempered film has several layers, the bottom layer is the silica gel layer, and the upper layer of the silica gel layer is an explosion-proof layer, and the explosion-proof layer is the same as the ordinary film, so the ordinary film is redundant. It is best to tear off the ordinary film and then paste the tempered film, otherwise it will affect the touch screen insensitive.

    2. The tempered film itself is to protect the mobile phone screen from being scratched by hard objects, and now a PET protective film is pasted to protect the tempered film. Putting too much protective film on the phone will cause the touch screen of the mobile phone to fail. If it doesn't affect the touch function of the phone, it depends on personal preference.

  11. Anonymous users2024-02-06

    Personally, I don't think this film is so easy to paste, and it is not as easy as a tempered film. This is a soft film, which is more difficult to apply.

  12. Anonymous users2024-02-05

    Paste 1 first. Yes, there are two bags with 1 and 2 written on them. It is a professional cleaning paper, 1 is wet and 2 is dry.

    Use 1 first, then 2 to clean the phone screen, and then apply the tempered film. If there is a fine dust after pasting, you can use the dust removal sticker to stick it down, if you feel that you can't paste it well, you can find a professional place to paste it.

    Before applying the film, the screen should be thoroughly cleaned, especially not to leave dust. After the No. 1 release film is torn, special attention should be paid to the fingers not to touch the adsorption layer, otherwise the effect of the film will be affected. During the film process, do not tear the release film at one time, you should tear it off and paste it at the same time.

    Make good use of scratch cards for defoaming.

Related questions
8 answers2024-08-13

Nowadays, smartphones are becoming more and more popular, and the products related to them are becoming more and more abundant, and the screen tempered glass film is one of them. Tempered glass film is now getting cheaper and cheaper, so that many people like to buy it online and do it themselves, and paste it on their beloved mobile phone to prevent the screen from being scratched or accidentally shattered. >>>More

9 answers2024-08-13

Since the bubbles of the tempered film are mostly caused by the residual dust on the screen, it is impossible for the bubbles of the tempered film to disappear by themselves under normal circumstances. If the air bubbles under the film are large, it will affect the use, and if it cannot be removed, the film can be re-applied. >>>More

10 answers2024-08-13

After the tempered glass film is bought, it generally has all the tools required for the film, such as dust-free cloth, alcohol wiping bag, and dust sticker. >>>More

9 answers2024-08-13

You can use this small piece of cloth to push the bubbles on the screen first, so that the contact area between you and the entire screen becomes larger, and there will be no gaps when pushing to let the bubbles run away. You can also fold the cloth in half a few times when pushing, and then use its edge to push the bubbles. >>>More

13 answers2024-08-13

Tear it off.

1. It is recommended to tear off, the film that comes with the mobile phone is a plastic film, and the original film is only to prevent the screen from scratching, not to prevent falling; >>>More