Can a new car be filmed directly? Will it affect the cards?

Yes, it is possible to comply with traffic regulations before the new car is licensed.

Stickers do not affect the cards.

What kind of film do you put on? Finally, after the license plate is finished, various car models will be pasted.

If you call 4s to get it, there will be no problem, these things are nothing more than relationships and money. Anyway, I first pasted the film and then inspected the car.,4S to do it.,Before sticking, I also specially asked if it would affect the car inspection.,4S said that the people inside.,All know it.,I understand.。

Generally, it is necessary to test, and it is best not to stick it, unless it is the kind that is very shallow.

Learned,I don't know if it's the same on the Zhejiang card.。。。

The car had not been licensed before, so I didn't dare to post it. Just pasted on the United States, the effect is good, the front windshield is very clear, the side windshield is also good at night, the only thing is that the side rear gear is still very deep, because the car itself has privacy glass, the hidden has become the effect of high concealment, and there is a recommended construction storefront, heat insulation is not known, because it is autumn and winter, it is worth commending that it does not affect the navigation and search for stars.

It's not a few days... Just wait... When I think of the horror of the next month, the iron sheet**... I panicked...

There is no absolute rule on whether a new car is licensed first or filmed first, because:

1, the film after the new car can be licensed, mainly depends on the sun film can meet the specified standards, the current vehicle management department is mainly based on the 2004 promulgation and implementation of GB7258-2004 "motor vehicle operation safety technical conditions", the standard of the article stipulates: "the motor vehicle cab must ensure the driver's front vision and side vision, the front windshield and the glass outside the windshield for the driver's field of view of the visible light transmittance is not allowed to be less than 70%;

2. All window glass is not allowed to post mirror reflective sunshade film. (Note: The part of the driver's sight area of the glass outside the windshield refers to the part used by the driver to observe the rearview mirror when driving; Mirror reflective sunshade films refer to those films that make the car window glass like a mirror and can see the human figure after being posted.

This also shows that the new car can be applied to the film before the license plate, but the film must meet the technical standards;

3. Some cars are not allowed to be licensed after the film, which is due to the fact that the film does not meet the technical standards, and it is likely that the transmittance of the solar film does not meet the requirements, such as the color is particularly dark, especially black, reflective, etc., "especially those cars that can't see anything from the outside of the cab after the film, it is obvious that it does not meet the regulations, in this case, the traffic police will let you tear off the film before you can get the license." ”

The film can be applied before the new car is licensed, because they will not care when the license is issued, I used to apply the film when the new car is licensed, but the film should not be too different from the original color.

Car film needs to choose a car film that meets the requirements of laws and regulations, and try to choose a light-colored car film that does not affect the field of vision. 2. Benefits of film: Car film can protect from the sun and heat, create a private environment and isolate ultraviolet rays and many other benefits.

No, it is best to apply the film after the license, because the car must be inspected when the license plate is issued, and the film will not match the original car.

The new car only needs to go to the vehicle management office for inspection before the license plate, is it possible to apply the film at this time? Only after the DMV has completed the formalities and registered the license plate can the vehicle be laminated.

Absolutely not! If you paste it, you have to let the errands of the DMV be torn off, don't ask why, it's all tears.

Landlord, the situation is the same, how do you solve it,

The solar film that meets the traffic regulations is generally available before the license plate can be installed, and the requirements of the traffic management departments around the country are different.

Many car owners will always be in a hurry to apply the film after buying a new car, but when they go to the license plate, the staff of the vehicle management office refuses to get the license plate because of the film! It's not the staff at the fence car owner. As early as 2012, the "Technical Conditions for Motor Vehicle Operation Safety" put forward clear requirements for the windshield film of automobiles, and the visible light transmittance must be greater than 70%.

This means that after the new car is filmed, if the light transmittance is poor, there is really no way to get the license. <

Therefore, car owners should be clear that the new car can be filmed, but the light transmittance of the film on the front windshield must be higher than 70%! However, most of the car films sold on the market do not meet this standard, especially the choice of darker side window films, which affects the driver's vision. If you meet an experienced car inspector when you get on the plate, you may be able to see with the naked eye whether the light transmittance is qualified!

If the owner wants to protect his rights, he may wish to do a light transmittance test. But the best way is not to apply the film before the license, wait patiently, and complete all the relevant procedures before going to the car film! <>

Also in the process of filming, a good solar film can indeed be safe explosion-proof, heat insulation, and prevent ultraviolet rays from irradiating on the decorations in the car, especially the female driver can protect the damage and improve the use rate of air conditioning. However, the darker the color of the car film, the better, and the heat insulation ability is not directly related to the color of the car film. In order to protect privacy, many car owners will choose a darker color car film, but they don't know that there are many potential safety hazards.

Especially in bad weather, it is easy to lose sight of the road ahead when driving. <>

It is recommended that car owners should not be greedy for cheap and choose informal small shop films, after all, the quality of the film seriously affects the driver's line of sight. And the poor quality film is not used for a long time, and it is easy to blister in the later stage! If economic conditions allow, you may wish to choose the front windshield film for the whole car.

Not only did the car inspection pass smoothly and ensure the driving vision, but even the heat insulation and ultraviolet protection were also leveraged.

Under normal circumstances, it is not affected, you must choose the solar film that meets the specified standards, and then it can be audited, as long as it meets the technical requirements.

If the color has changed greatly, this situation will definitely affect the upper plate, and there are clear provisions in the technical conditions for the safety of motor vehicle operation.

The new car film does not affect the license, and the carpool film is mainly to protect the entire car, so there is nothing to do with the license plate and the whole car's film.

The requirements of the local traffic management departments are different, and the solar film that generally meets the traffic laws and regulations can be installed and pasted, and does not affect the license.

Hello, now the film has to be pasted after the card.