How to clear the tire pressure light of Volkswagen Matwe

1. First of all, start the Volkswagen Matwe car and turn on the main display screen of the Volkswagen Matway car.

2. Find the vehicle status option on the main display of the Volkswagen Matway car below, and click on it.

3. Then find the tire setting option on the main display of the Volkswagen Matway car, and click on it.

4. Next, click on the reset option on the main display of the Volkswagen Matway car.

5. Finally, after the tire pressure reset of Volkswagen Matway is completed, the tire pressure light will be cleared.

Hello, Volkswagen's tire pressure gauge reset just long press the tire pressure monitoring button until the light goes out, if my answer is helpful to you, please set to. Thank you!

Hello, first of all, you have to increase the tire pressure to the fixed position, and then eliminate. I hope it can help you [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

There are two ways to adjust the air pressure:

1 In the menu of the meter, there is a tire pressure alarm menu click.

Save the confirmation at the point.

2 Use a professional computer to enter the abs system Basic settings Enter 42 to save and confirm.

I hope it can help you [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, long press the tire pressure monitoring button until it goes out, I hope it can help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Volkswagen's tire pressure indicator can be eliminated by using the tire pressure button on the right side of the gear lever and pressing and holding for 3 secondsThe specific steps are as follows:

1. Pull the door handle.

2. Open the door on this side of the cab.

3. Press the one-button start button.

Fourth, the instrument lights up, and the vehicle power is turned on.

5. Press and hold the button in the picture.

Precautions for operation:

1. Before pressing, inflate the tires.

2. The air pressure is best on the left and right.

Hello, Volkswagen series tire pressure fault light clearing, there are the following methods.

First, some models have a separate button, which can be cleared, this is generally in front of the gear lever in the car or there is a set button in the co-pilot glove box, after the vehicle instrument is powered on, press and hold this button for 3 to 5 seconds to clear.

Second, some models do not have this separate button, which is cleared at the position of the vehicle's central control display, directly press the CAR button, and then enter the vehicle system, select the tire pressure monitoring system, and then reset it.

Third, if the vehicle with the central control display is modified with a large-screen navigation all-in-one machine, then this cannot be removed manually, and you need to go to a 4S shop or repair shop to use a special computer to clear the tire pressure fault light.

Volkswagen SET light refers to: the vehicle's tire pressure monitoring indicator, if the SET vehicle tire pressure monitoring indicator light is lit, it means that the vehicle's four tires, at least one of which is lower than the standard pressure value, belongs to the state of gas loss. This requires checking the air pressure of all four tires with a tire pressure gauge, and inflating if there is a lack of air.

Press the SET button to reset after inflation is complete. This light will go off. Volkswagen has three main tire pressure reset modes, the first is in front of the gear lever or on the right side of the gear lever there is a button labeled set.

Just turn on the ignition switch, and after pressing this switch for three seconds, the tire pressure reset is complete. The second is to reset the tire pressure on the MIB II small screen entertainment system, first turn on the ignition switch, turn on the stereo, and press the SETUP button. Turn the knob on the right side of the radio to the tire gear.

Press the right knob once, remembering to press down instead of spinning. At this time, the screen will appear "whether to save tire pressure", if yes, press the right button once, and the tire pressure reset will be completed. The third is to reset the tire pressure on a large-screen entertainment system with MIB.

First turn on the ignition, turn on the stereo, press the CAR button, then click the settings button at the bottom of the screen, find the tire option, click on the tire, select SET tire pressure reset, click to save the data, and the tire pressure reset is completed.

There is a set button in front of the gear, and it can be eliminated by pressing and holding for 5 seconds to reset.

It is to reset the tire pressure on the MIB II small screen entertainment system, first turn on the ignition switch, turn on the stereo, and press the SETUP button. Turn the knob on the right side of the radio to the tire gear. Press the right knob once, remembering to press down instead of spinning.

At this time, the screen will appear "whether to save tire pressure", if yes, press the right button once, and the tire pressure reset will be completed.

Normal tire pressure. Tire pressure standards vary depending on the type of tyre and the type of tyre, and the required tyre pressure varies from vehicle to vehicle with different vehicle weights, heights, and tire sizes. The tire pressure is 240kPa-250kPa for standard tires and 280kPa-290kpa for enhanced tires.

Moreover, the tire pressure of cool tires is also different from that of hot tires, and the pressure of hot tires is about 20kpa higher than that of cold tires. The manufacturer's recommended value is the tire pressure value of cold tires, and the tire pressure in the cold car state is about 230kpa-250kpa, but the specific tire pressure marked on each car shall prevail.

In addition, the tire pressure is particularly affected by seasonal factors, the temperature is high in summer, the tire is easy to heat up during driving, and the tire pressure is easy to cause a puncture if the tire pressure is high, and the tire pressure is slightly lower; The tire pressure in winter is a little higher than that in summer, because the cold shrinkage and heat rise, so the tire pressure of the car in winter is generally between 250kpa-280kpa.

The car tire pressure warning light sign is a jar-like shape with an exclamation mark inside. Most models are equipped with a tire pressure monitoring system to monitor whether the tire pressure of the vehicle is normal at all times. When there is a problem with the tyre pressure of the vehicle, the tyre pressure warning light will be illuminated.

If the tire pressure warning light is on, it is best to stop and check what is causing the tire pressure problem. Identify the cause and repair it in time to avoid hidden dangers of accidents. It is important to know that if there is a problem with the tire pressure, the safety hazards that come with it can be big or small.

It is recommended that riders whose vehicles are not equipped with a tire pressure monitoring system should buy a tire pressure test tool to check the tire pressure from time to time to see if there is any abnormality.

How to eliminate the tire pressure failure light when it is on:

1. The warning light of the tire pressure monitoring system is lit during driving, and the speed should be reduced immediately and stopped on the side of the road. If you have a simple inflation device or tire pressure gauge, you can measure and inflate each tire. If not, drive slowly and find the nearest server or car repair shop or 4S shop;

2. When the tire pressure is adjusted to normal, the tire pressure light can be reset, in addition to using a special decoder to clear the fault code to realize the tire pressure light reset, for the model with the tire pressure reset button, it can also be operated manually under the condition of normal tire pressure. Such as the common tire pressure reset button;

3. Operation method: Turn on the start ignition switch, press and hold the tire pressure monitoring reset button, and hear"Boom! "At this time, the tire bed monitoring system will store the normal tire pressure data at this time, and then automatically clear the original data, and finally the fault light on the dashboard will be extinguished.

This method is only applicable to certain models, which can be described in the vehicle's owner's manual;

4 Note: If the tire pressure monitoring system warning light is on during driving, please stay calm, do not panic, immediately reduce the speed of the vehicle and avoid hitting the steering wheel and braking sharply, and check the tires immediately.

Summary. The first thing to do is to make sure that the tire pressure is really okay. Stop on the flat road and turn off the ignition, then turn on the power, press and hold the tire pressure monitoring button, about 5-6 seconds will hear an alarm, and then release the button, and the reset will be successful.

First of all, it is necessary to make sure that the tire pressure is absolutely fine. Stop on the flat road and turn off the fire, then turn on the power, press and hold the tire pressure monitoring button, about 5-6 seconds will hear an alarm, and then release the envy button, and the reset will be successful.

How to tell which tire it is when the alarm light is on.

The most fierce rental shirt is the best answer to the mess] The tire pressure light is on. You can use the detector to read the fault, and then replace the fault code to know which tire pressure sensor is faulty. The above is the common tire pressure lamp lit by the old branch cavity barrier.

The tire pressure light is on depending on whether the tire pressure is really insufficient or the tire pressure is transmitted.

After resetting, the fault light appeared again after running for half a day, check that the tire pressure is normal, what is the situation.

Normal does not light up.

Have you checked it yourself?

Checked. That's a system failure.