How to press reset when the tire pressure light is on

Volkswagen Lavida tire pressure light method is to press and hold the black column on the instrument, turn the key door 3 times, from close to 2nd gear, without starting the vehicle, you can eliminate, if it is time for maintenance, try not to get out of insurance. When the ignition is in the ON position, the "Service" logo on the display flashes, and the logo disappears after starting the engine, indicating that the car should be serviced. After maintenance, the maintenance lamp should be zeroed.

Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting or replacing certain parts of the relevant parts of the car, also known as car maintenance. The "service" logo on the display of the watch plate is an indication of the maintenance interval, and modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.

Daily maintenance is daily maintenance, a level of maintenance is carried out by professional maintenance enterprises, in addition to daily maintenance operations, the content of the operation center is mainly cleaned, lubricated, fastened, and inspected about braking, manipulation and other safety components. Before leaving the car, during the car, after the operation is carried out by the driver, the content of the operation center is cleaning, supply and safety inspection, which is a regular and necessary work to maintain the normal working condition of the vehicle.

Hit the car, see if there is a button in front of the gear lever that is the same as the tire pressure light, find this button, and press and hold for about 3 seconds. Press and hold the brake and press and hold the switch. If it doesn't work, turn off the key, open it again and try a few more times.

If you really can't reset it manually, you can only use the computer to set the tire pressure from the new.

Use a specialized decoder to clear the fault code.

If the tire pressure monitoring system warning light is illuminated while driving, stay calm, do not panic, immediately reduce your speed and avoid fast steering wheel and hard braking, and check your tires immediately. If you have a simple inflation device or tire pressure gauge, you can drive to the side of the road, test and inflate each tire. If you don't have one, you can drive slowly and find the nearest server or car repair shop or 4S shop.

**Lavida has canceled the physical tire pressure reset button, in the multi** entertainment system, vehicle settings, tire pressure, select reset.

Hello! Look at the glove compartment to see if there is a tire pressure light switch! If there is any, keep pressing the open key in 2nd gear! Until the lights go out.

Reset with an automotive-specific decoder.

FAW-Volkswagen dry cavity Voloyi tire pressure light reset, need to start the engine, and then turn on the electronic system of the full circle regret car, the specific operation steps are as follows:

1. Press the brake pedal of FAW-Volkswagen Lavida to prepare to start the FAW-Volkswagen Lavida engine.

2. Press the one-button start button of FAW-Volkswagen Lavida.

3. The instrument lights of FAW-Volkswagen Lavida are all lit up, which proves that the engine of FAW-Volkswagen Lavida is started.

4. Inflate the four tires of FAW-Volkswagen Lavida to the standard air pressure, so that the tire pressure of the four tires is the same.

5. Press the tire pressure reset button of FAW-Volkswagen Lavida, and the tire pressure light of FAW-Volkswagen Lavida can be reset.

Volkswagen tire pressure monitoring light on elimination method: turn on the ignition switch, press the button of the tire inflation pressure control system set and hold, the tire monitoring button is located on the black button on the front panel of the gear lever, until the meter indicator lights up. After confirming that the new tire parameters are stored, the tire pressure light will be reset.

If you can't press the tire pressure indicator for a long time, it will be clear, if you can't use the computer to eliminate it, if you can't, it's a problem with the sensor.

Volkswagen Lavida tire pressure light on the reset method, first turn on the ignition switch, then press the button of the tire inflation pressure control system set and hold, the tire monitoring button is located in the black button on the front panel of the gear lever, until the instrument indicator lights up, and finally confirm that the new parameter is stored and extinguished, then the tire pressure light reset is completed.

The reason why the Volkswagen Lavida tire pressure light can't be pressed off:

If you change the tire inflation pressure or change the wheel, turn on the ignition switch, press the button set of the wheel tire inflation pressure control system and hold it until the instrument indicator light is on and off. After confirming that the new parameters are stored, it will be extinguished, and the tire pressure monitoring can be set again.

If the reset cannot eliminate the tire pressure warning light, you need to do some virtual source checking, the following conditions may change the tire pressure and cause the tire pressure warning light to turn on: the tire inflation pressure is too low; The structure of the tire is damaged; The vehicle is loaded on one side; The wheels on the axle are too heavily loaded; Fitted with a non-slip chain; a temporary spare tire was installed; The wheels were replaced. If the problem still cannot be solved, the diagnosticator needs to enter the ABS system for inspection and clear the fault code.

Photo by Tang Yanyan of Pacific Automobile Network).

When the FAW-Volkswagen Lavida tire pressure light is reset, the engine needs to be started, and then the electronic system of the whole vehicle needs to be turned on. The specific operation steps are as follows: First, press the brake pedal.

It splits and presses the start button. Three. All the gauge lights are on, proving that the engine is starting.

4.Inflate all four tires to standard air pressure so that all four tires have the same tire pressure. 5.

Press the tire pressure reset button to reset the tire pressure light.

Volkswagen Lavida eliminates the tire pressure alarm by first turning off the engine, then turning on the power for self-inspection, and then pressing and holding the tire pressure monitoring button on the right side in front of the gear lever for a long time. Generally, a "ding" sound can be heard in three seconds, and the dashboard tire pressure warning light can be eliminated after release.

Tire pressure warning lights can be altered by the following: the tire inflation pressure is too low; The structure of the tire has been damaged; The vehicle is loaded on one side; The wheels on the axles are overloaded; Equipped with snow chains; Equipped with a temporary spare tire; The wheels were replaced.

Daily maintenance is daily maintenance, and first-level maintenance is carried out by professional maintenance enterprises. In addition to routine maintenance, the main focus of the operation center is on cleaning, lubrication and tightening, as well as checking safety components such as braking and operation. The driver is responsible for the operation before, during and after the car is collected.

The content of the fulfillment center is cleaning, ** and safety inspections, which are routine and necessary work to maintain the proper working condition of the vehicle.