How to eliminate the Volkswagen speed rising tire pressure lamp, how to eliminate the speed rising t

There is a button in the upper left corner of the glove compartment.

You can charge the tire pressure to the standard tire pressure, turn on the ignition switch, and press this button for a long time to eliminate the tire pressure failure light. Thank you.

There is a button in the front storage box on the co-pilot's side, which can be operated over there, I hope it helps you, thank you!

Eliminate faulty lamps with a Volkswagen-specific decoder.

First press the tire pressure monitoring switch for more than 3 seconds, and when you hear a "ding dong", the tire pressure alarm indicator light on the dashboard will go outThen turn on the ignition and press the reset button on the instrument panel until the light goes out.

<> tire pressure. Strictly speaking, it refers to the pressure of the air inside the tire. In car maintenance, the engine is the heart of the car, and the damage of the engine will lead to the exhaustion of the car's life, so the tire pressure is the blood pressure of the car, and the tire pressure plays a vital role in the performance and power of the car.

The tire pressure monitoring system is the same for all models of the new Sutar. The tire pressure monitoring system operates automatically. Tire pressure detection is automatically detected, if the tire pressure is insufficient, or the tire is punctured, or the tire is impacted, the tire pressure reminder will appear on the dashboard, and you can clear the fault code by pressing and holding the tire pressure detection button in the co-pilot hand buckle after the fault is lifted.

Take Sutar as an example, park your car in a garage or in a safe area。The specific method is shown in the following figure:

2. Start the vehicle, the central control screen will light up, and click the button selected in the red box. The specific method is shown in the following figure:

3. Find the red box selected "tire" on the central control screen and click to enter. The specific method is shown in the following figure:

Pressure monitoring alarm light, there is 1 row of buttons above your transmission, there should be 1 called (!) ) button, press and hold 1 straight and do not move, it can be eliminated. However, the tire pressure monitoring light is on, indicating that the tire is flat.

Press and hold this button after repairing the tire, the way is to screw the key to the power supply before the car is lighted, do not start the car, press and hold (!) after turning on the power supply. ) button and it will disappear in a few seconds.

You have to see if there is a button from manual reset in your gear position.

If anything.

The car doesn't start.

The electric gate opens. Press and hold the button and don't move.

Until the lights on the dashboard go off [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The Turbo Tire Pressure Monitoring Elimination button is in the co-pilot, in the storage compartment, on the top left.

How to eliminate the new Suteng tire pressure alarm?

Hello, there should be a button in the co-pilot's handbuckle Press and hold for 10 seconds It should be able to solve the problem If it is not in the handbuckle Start the vehicle, the central control screen is turned on and then click the car button, find the "tire" option in the central control screen and click to enter, and then select "set" to enter the next setting, then click the "OK" button, and then click "tire pressure monitoring initialization" to eliminate the tire pressure failure light. Hope it helps.

The method of resetting the tire pressure light is: there is a storage box opposite the passenger seat, which has a tire pressure detection switch button, and a tire pressure monitoring icon on it. Note that before the tire pressure light is reset, it is necessary to check whether the tire pressure is normal, and the reset operation can only be carried out under the condition of ensuring that the tire pressure is normal.

Hello: The tire pressure monitoring system works in conjunction with the ABS system to monitor the change of tire pressure, and if the tire pressure of the wheels is lower than the set value of the system, the warning light on the instrument cluster will illuminate. It is important to note that the relevant tire pressure information is not displayed on the instrument panel, and the warning light will only illuminate if the tire pressure is abnormal.

The instrument cluster tire pressure light is on. Before the tire pressure warning light is removed, you must first determine whether the tire pressure is normal, and there are two ways to eliminate the tire pressure warning light in the case of ensuring that the tire pressure is normal

First, it is to go directly to the Volkswagen Lavida after-sales service point to let the maintenance personnel diagnose the fault code of your computer and eliminate the error code;

Second, it is to press and hold the tire pressure monitoring button on the right side in front of the gear lever, and the tire pressure light can be eliminated after three seconds.

Hope it helps!

First of all, check whether the tires are punctured, remeasure the tire pressure, you can drive 20 kilometers or force a reset.

There are two methods, one is to find a certain auto repair shop or professional maintenance shop, they have a special detection computer, and the problem can be eliminated after the computer is reset, but the premise is to check and balance the tire pressure first. The second method is the manual method. After balancing the tire pressure, put the ignition switch in the ON position, and then press and hold the tire pressure alarm switch for more than five seconds, directly prompt a sound, and then turn on the ignition switch, and the tire pressure alarm light will automatically go out after re-testing.

1.Generally, there are the following situations: rapid air leakage, high pressure, low pressure, high temperature.

The indicator light is based on the tire pressure and other problems to the owner of a pre-type, perhaps in the process of driving there are potholes, the tire force is different, the tire pressure changes, the indicator light will also be on.

2.The tire pressure light is not on, and before starting the car, you should check it first to see if the tire pressure detector is normal. When the car is in trouble, if the tire pressure monitor does not alarm in time, it is a problem with the tire pressure monitor; If the ignition switch is on start, the indicator light point and the TPMS indicator light will be on at the same time for 2s and then turn off.

In this case, either the original receiver of the vehicle has not been learned, or the receiver controller has been replaced, and the receiver controller has not been learned. You can go to the 4S store and ask professionals to use handheld learning tools to re-obtain all tire sensor IDs and bind the receiving controllers.

3.But if the ignition is played from OFF to START or ON, the indicator light does not illuminate. Then this situation is the failure of the instrument indicator, for the sake of safety, you have to go to the 4S store to ask professionals to check the instrument, if the meter is damaged, the instrument needs to be replaced.

How to eliminate the new Suteng tire pressure alarm?