How to adjust the inclination angle of the eight generation Accord is not right

Updated on Car 2024-08-08
3 answers
  1. Anonymous users2024-02-15

    The rear lower suspension (front) has an adjustment eccentric screw; There are two 10mm screws on the rear suspension, which can be adjusted by adding spacers.

    The growth in size and space is an important highlight of the eighth-generation Accord. Its length, width and height reach 4945mm, 1845mm and 1480mm respectively, and the wheelbase reaches 2800mm.

    In terms of size, the eighth-generation Accord has been classified from "medium" to "large" by the U.S. Environmental Protection Agency (EPA), surpassing it in terms of size and space. The generous size can meet the customer's requirements for space comfort.

    Introduction to power. The eighth-generation Accord is powered by the newly upgraded Honda i-VTEC engine. Among them, the newly upgraded i-VTEC engine, the liter engine has increased the size of the intake valves, and the maximum power reaches 156 hp (115 kW), which is 6 hp higher than the previous generation Accord engine, and the maximum torque is 189Nm at 4300rpm.

    The Accord Liter's i-VTEC inline-four engine has a smaller spark plug, redesigned coolant flow, and optimized ignition timing, resulting in a maximum power of 180 hp (132 kW) and 225 Nm of torque, an 8% increase in power and 4% more torque than the seventh-generation Accord.

    And the most striking version of the Accord will be equipped with a V6 engine, which can burst 280 horsepower in an instant. While boosting power, the new Accord also features Honda's state-of-the-art VCM technology, which automatically switches between 3-cylinder, 4-cylinder and full 6-cylinder operating modes depending on the situation, thus greatly reducing fuel consumption.

  2. Anonymous users2024-02-14

    The adjustment method for the incorrect inclination angle of the eighth-generation Accord is to adjust the eccentric screw before the lower suspensionThere are two 10mm screws on the rear upper suspension that can be adjusted by adding spacers to offset the tendency of the front wheel camber point to turn the wheels to both sides, and minimize the lateral slip rate of the wheels during driving.

    The use of Accord inclinationCorrected the adverse effects of front wheel camber, the toe-in value of the front wheel is too large, and the outer shoulder is worn with serrated teeth. Reverse toe can cause zigzag wear on the inside of the shoulder. If the sideslip exceeds the standard when the car passes the test of the skateboard, it means that the toe-in angle of the front wheel and the camber angle of the front wheel do not match, and the front wheel toe needs to be readjusted.

    All cars can adjust the front wheel toe, the adjustment of the front wheel toe is to adjust the length of the cross tie rod, the cross tie rod is behind the axle, the forward rotation of the cross tie rod toe value becomes larger, the rack and pinion steering gear is two cross tie rods, the two cross tie rods need to be adjusted when adjusting, and the length error shall not be greater than 5mm, otherwise it will cause driving deviation. Look at the outside wheel when it turns 20 degrees.

  3. Anonymous users2024-02-13

    Summary. 1.The rear lower suspension (front) has an adjustment eccentric screw; 2.There are two 10mm screws on the rear suspension, which can be adjusted by adding spacers.

    1.The rear lower suspension (front) has an adjustment eccentric screw; 2.There are two 10mm screws on the rear suspension, which can be adjusted by adding spacers.

    Is there a problem with that? Do you want to retarget.

    You can try.

Related questions
9 answers2024-08-08

To unscrew the screw on the key first.

After unscrewing the screw, slowly open the plastic shell. >>>More

30 answers2024-08-08

If you want to change the engine oil, it may be better to choose a fully synthetic engine oil from a big brand such as Mobil One or Shell KingCare Castrol.

14 answers2024-08-08

In general, there are several reasons for the abnormal noise of the eight-generation Accord power pump steering machine, first. The bearing of the booster pump itself rings. Second, the ball head of the lower swing arm is loose. >>>More

14 answers2024-08-08

The eight-generation Accord is a little smoky in front of the electric lighter, which may be caused by a short circuit in the circuit part, which needs to be found by professionals immediately to find the cause and eliminate it in time.

6 answers2024-08-08

Accord advantages: young and dynamic, new models, good quality, more famous, stronger handling than the natural sound, the eighth generation Accord won the highest safety evaluation of the United States N-CAP (six stars of the highest evaluation, the previous generation of four stars), selected into the list of the safest cars, Honda has begun to pay great attention to safety, the implementation of the national safety plan, began to get closer to Volvo, the new design of the safety chassis, the new model of the i-VTEC engine, is the world's rare engine with variable valve control and lift at the same time, The new model of this engine has reduced fuel consumption, and the space in the eighth belt and the car has been increased, and it is indeed the strongest Accord in history. >>>More