What should be called recycled plastic pellets produced from paper mill waste plastics

1. It is called recycled plastic pellets.

2. Recycled plastic particles belong to the category of plastic particles, and recycled plastics are the plastics produced by the new materials or waste plastics that have been used by the screwing machine, and then cut into granules by the pelletizer.

Plastic waste is everywhere in life, and its reuse can be made into pellets and applied to all aspects of life. However, the application fields are different, for example, convenience bags made of recycled pellets cannot be used for food packaging, and some particles processed with PVC may contain toxins themselves, so their application scope will be limited.

The recycled particles processed after sorting, cleaning and crushing waste plastics have a certain market value. Today, Baibai Safety Net will take you to learn about the paper mill waste plastic processing particles.

The application fields of different recycled plastic particles are also different, the convenience bags made of recycled particles cannot be used for food packaging, and some particles processed with PVC may contain certain toxins, so their application range is also limited. So what is the paper mill waste plastic processing pellet? What is the treatment method of household waste?

Today, Baibai Safety Network will take you to learn about these solid waste safety tips.

Paper mill waste plastic processing particles mainly process some low-grade soles, as well as plastic basins, buckets, toy models, etc.

Waste plastic processing pellet use:

1. After the waste plastic is processed into particles, it still has good comprehensive material properties, which can meet the technical requirements of blown film, wire drawing, tube drawing, injection molding, extrusion profiles, etc., and is widely used in the production of plastic products.

2. In daily life, recycled particles can be used to make various plastic bags, barrels, basins, toys, furniture, stationery and other living utensils and various plastic products.

3. In the garment industry, it can be used to manufacture clothing, ties, buttons, and zippers. In terms of building materials, it can be used to make various building components, construction tools, plastic doors and windows, and plaster buckets. In agriculture, it can be used to make agricultural films, pumping pipes, agricultural machinery, fertilizer packaging bags, and cement packaging bags.

4. In the machinery industry, recycled particles can be used to manufacture machine parts, various forms of bearings, gears, cams, heterogeneous wheels, sealing rings, various blades, and various water pump impellers after special formulation. In the chemical industry, it can be used as reactors, pipelines, containers, pumps, valves, etc., and is used in chemical production sites to solve corrosion and wear. In addition, recycled pellets are also widely used in the electrical appliance industry and the telecommunications industry.

The above is the paper mill waste plastic processing particles introduced to you by Baibai Safety Network.

Plastic recycled pellets are processed into pellets from waste plastics, and processed from waste plastic products as raw materials, with a broad market. Food packaging bags, agricultural films, woven bags, beverage bottles, plastic basins, buckets, toys, old sandals, vehicle bumpers, etc.

Polypropylene and high-density polyethylene.

Recycled plastic pellets.

Plastic granules are the raw materials for processing plastic products, including polyethylene, polyvinyl chloride, polypropylene and other plastic granule raw materials. After a certain cycle of plastic use, the amount of waste plastic produced is about 70% of the output, so that after gradual accumulation, if it cannot be effectively utilized, the huge waste plastic products will affect the environment, occupy land resources, destroy the ecological environment, and endanger human survival.

The heating and shearing inside the screw will release some low molecular gases, especially plastic raw materials containing chlorine and benzene such as PVC, POM, PS, etc., and the volatile gases are harmful to the human body.

Most of the general waste cloth heads are cotton, viscose, polyester, nylon, and the first two are difficult to reuse into recycled plastics. The latter two are generally the ones that can be made into recycled plastics. Polyester, the trade name of polyester fiber, if it is a recycled plastic pellet made of polyester, then its scientific name should be polyester.

Nylon is the trade name of polyamide fiber, if it is a recycled plastic particle made of nylon, its scientific name is polyamide plastic, and it is also directly called nylon plastic, anyway, everyone knows what it is.

The first material of PET is mainly limited to bottles, membranes and other materials, and there is no report on the leakage of fiber hole and villi made of PET. PET fiber woolen is mainly used for carpets, blankets, woolen coats, etc.

However, in the process of preparation, a large number of leftovers and tailings are generated, and these leftovers and tailings are relatively dry and rotten, but they cannot be directly reused. With the substantial increase in the amount of consumption, the waste of PET fiber felt has also become a waste that cannot be ignored, and its use can not only reduce environmental pollution, but also obtain huge economic benefits, making it a treasure.

Usually required: crusher, sieve machine, extruder, pelletizer, sewing machine, conveyor; Some also need to clean the dryer and so on.

Set up a recycled plastic pellet factory, and the investment scale can be large. You can start from one production line, or you can purchase multiple sets of equipment at the same time for large-scale production. It is recommended that you decide the size of the production scale according to your actual conditions, and only by working steadily can you win step by step.

Plant requirements: Take a small and medium-sized production line as an example, the plant is about 30 square meters, requiring water and electricity, and the material yard is more than 30 square meters.

Workers: A production line only needs 2-4 workers, two shifts. If it is a large-scale production, the number of workers should be appropriately increased.

Workers should have a primary school education or above, and it is recommended that investors give priority to laid-off workers, because they all have certain skills and organizational discipline concepts, and they are quick to take up jobs and easy to manage.

It is necessary to choose a good site, because it is a large area of waste plastics, and it is necessary to have convenient water, because waste plastics are dirty, and a lot of water is needed to clean, power and electricity, and drainage is convenient, first of all, it is necessary not to pollute and not disturb the people. The next step is to choose a good manufacturer-made machine, which requires a cleaning crusher, a plastic granulator, and a pelletizer. It is also necessary to have sufficient sales channels for waste plastics** and pellets in the future.

1. The selection of raw materials for plastic recycling pellet plant is mainly based on the actual situation of the local market, and then it is necessary to choose according to the processing difficulty of raw materials, and common raw materials such as polypropylene, polyethylene, ABS, etc. can be considered for selection.

2. The raw materials mainly come from people's daily household garbage, production waste, or leftovers and scraps of some plastic products factories.

3. The ** of a production line of Shuangxin plastic machine ranges from 20,000 to more than 100,000, mainly according to the output and specific configuration you need. The standard equipment configuration includes: crushing equipment, cleaning equipment, rinsing and fishing equipment, plasticizing equipment, extrusion and strand equipment, cooling equipment, and pelletizing equipment.

It can also be optionally configured: choice of heating method, conveyor, feeder, feeder, etc.

4. It is not a problem to sell the particles made, and the specific ** should be determined according to the quality of the particles you produce.

As long as your raw materials are stable, you don't have to worry about making money!!

1. What to do is first decided according to your local market, you don't have any special customers to do general plastics PE, PP; 2. Raw materials are generally imported materials, domestic materials are factory scraps, machine head materials, scrap station plastics, etc.;

3. A production line mainly depends on what materials you want to make, such as a set of extrusion granulators for good clean leftovers; Dirty materials and large materials should be crushed and cleaned; **It also depends on your requirements for output and degree of automation,** fluctuating a lot of 2-30,000-200,000 or more have 4, the general amount of PE and PP general plastics is still very large, and you Anhui should be OK as long as you get the raw materials.

**It's not good, I'll just wait and see first, because it seems that you don't even look like a novice, so don't do it, let's see the situation next year.

If you have friends in this circle, that's fine, if not, there are difficulties.

1. Noise. It can achieve the purpose of noise reduction and attenuation through distance, blocking, etc. If the decibel is too high, noise reduction equipment such as mufflers can be installed.

2. Sewage. It is mainly cleaning wastewater, the concentration is not high, and it can be directly discharged into the municipal pipe network or simple flocculation treatment.

3. Dust. Not a big problem. In serious cases, dust removal equipment such as bag dust collectors can be installed.

4. Peculiar smell. Basically, it's not a problem, just stay a little away from the residents.