Which is better, raw rubber bottom or rubber bottom, and the one with rubber bottom and rubber foam

How about rubber sheets? This question cannot be generalized and should be analyzed according to your specific situation. Here is a brief introduction to the characteristics of rubber sheets for your reference.

Food Grade Rubber Sheet, Specification: 1 80 mm? 100 2000 mm; Specific gravity:

Tearing force: 4MPa; Elongation: 300%; Hardness:

605；Performance: non-toxic, tasteless, good elasticity; Uses: used in food processing places and food industry tool accessories; Features:

Made of tasteless and non-toxic raw materials, it has no harmful chemical ingredients to the human body, and the color is consistent and pollution-free; Colour: red and white; Color can be customized according to requirements Packing: kraft paper, woven bag, film bag.

Cloth rubber sheet, specification: mm? 100 2000 mm; Parameters:

The rubber compound can be according to customer requirements....

Both the raw rubber sole and the oxford sole are rubber soles.

Raw rubber is a general term for unmolded and mixed rubber, which is the most fundamental raw material for the manufacture of rubber compounds, including natural rubber and synthetic rubber.

The plastic construction effect of raw rubber is poor, with low hardness, low density, easy wear and breakage; It is not resistant to oil, heat, discoloration, and more expensive. But the raw rubber sole is more comfortable and soft.

Oxford sole is a pale yellow translucent sole named for its color and shape similar to cow's hoof tendons. "Beef tendon bottom" is described as strong as beef tendon, but the beef tendon bottom is artificially made, also called thermoplastic elastic rubber bottom. (At first, it started with rubber beef tendon, and at that time, it was mainly used to make sandals, and then this color was connected with other materials, and it was commonly called beef tendon color.)

It can be said that beef tendon originally referred to natural rubber, and then evolved into a color card name. ）

Beef tendon bottoms can be made of rubber or plastic, and thermoplastic rubber (TPR) is the most convenient to make. This kind of sole has a beautiful appearance, and has good elasticity and wear resistance, comfortable to wear, silent walking, is a good sole material for travel shoes and daily life shoes.

Raw rubber. The sole is a very common sneaker sole, many people think that this sole is more expensive, but they don't find its practicality, that's because you have less contact, below, let's take a look at the advantages and disadvantages of raw rubber soles, why are raw rubber soles so expensive Advantages and disadvantages of raw rubber soles.

Why are raw rubber soles so expensive.

Compared with ordinary soles, raw rubber will definitely be a little more expensive, but ** is also within the range that can be afforded.

Mainly, it is especially for basketball shoes and sneakers, so it has been improved on the **.

Why are raw rubber soles so expensive Advantages and disadvantages of raw rubber soles.

Advantages and disadvantages of raw rubber soles.

Raw rubber soles refer to rubber soles that have not been vulcanized.

The advantage is that it is elastic, soft, and comfortable on the foot.

The disadvantage is that it is not resistant to wear, and the early wear and tear of general wear is fast and gradually stagnates.

Why are raw rubber soles so expensive Advantages and disadvantages of raw rubber soles.

The choice of raw rubber substrate is targeted:

Specific requirements (comfort) of specific consumer groups, more expensive shoes and boots, worn on the bottom plate, carpet and other venues.

Requirements for the functional design of the shoe itself (friction.

non-slip), badminton, volleyball, dual-purpose shoes, etc.

Why are raw rubber soles so expensive Advantages and disadvantages of raw rubber soles.

Shoes with raw rubber soles will not crack easily.

It is not rotten and will not crack, the raw rubber sole is of good quality, soft and comfortable, and the badminton shoes are made of raw low.

The raw rubber rubber is similar to the ordinary positive adhesive rubber in terms of specifications, but the glue content of the colloid is larger than that of the positive adhesive rubber, so the particles are softer and the elasticity is relatively larger.

Why are raw rubber soles so expensive Advantages and disadvantages of raw rubber soles.

The reason why the soles of badminton shoes are raw rubber :

The soles of badminton shoes are mostly made of raw rubber or artificial rubber, and the soles of raw rubber are suitable for wooden boards because of their strong grip, so volleyball shoes can be used as dual-purpose shoes. However, the soles of different brands will be made hard due to the production process, the proportion of raw rubber doped powder is too much, and the soles are not worn for a long time, because the footsteps of badminton are very important, and the shoes can not slip, and the force of each forward and backward is very large, and the friction between the shoes and the ground must be large to protect the athletes, so that the athletes can stop and turn sharply. Therefore, it is necessary to use the sole of raw rubber to increase the friction with the ground.

Of course, the rubber sole is better, the rubber material is very soft, and it is very wear-resistant, and it is very comfortable to wear as a sole.

Raw rubber sole and rubber sole I think it is better to have a rubber bottom, and the rubber sole is wear-resistant and scratch-resistant

Raw rubber sole and rubber sole, I think these two must be rubber soles are better, rubber soles are more wear-resistant, and they are also more comfortable and softer, so I think rubber soles will be better.

Hello, if the rubber bottom is compared with the raw rubber bottom, I personally think that the raw rubber bottom is better.

I think the rubber sole is better, and this one is a little more practical and better.

Of course it is good for rubber soles.

Rubber soles are more abrasion resistant and last longer than deep coke soles.

It is still the best rubber bottom to be anti-aging, anti-slip and wear-resistant, and the raw rubber bottom is easy to break and has a short life.

Under normal circumstances, of course, it is better to have a rubber bottom, because it is not easy to fold.

Comparatively speaking, it is definitely a rubber sole that is better because it is comparatively more comfortable to wear.

Relatively speaking, the rubber bottom will be better, because the toughness of the banana body will be better in this aspect.

Which is better rubber sole? I think it's better to have a rubber sole because it won't slip.

Now the rubber sole and rubber sole, I think it is better to have a rubber sole, and I have talked about this child according to his own liking.

Is it better? Banana sister is more elastic and has good flexibility, much better than raw rubber.

Both of these are actually very good, but if I had to choose, I think the first one might be a little better.

The two good ones of the rubber sole and the rubber are still better than the rubber bottom, which should be wear-resistant and non-slip.

Personally, I think that the soles of the feet should be better and more wear-resistant.

Which is better, raw rubber sole or rubber sole? Or is it better to have a rubber sole? Because the rubber sole is more flexible and elastic.

There are two kinds of bottoms, of course, rubber bottoms are better.

Triangle pads and rubber soles are personally considered better, depending on your needs.

There's no way, if he can be very good with you, there's definitely no way to get him inside, and it's good with you once.

I checked it for you just now, so you know that it shows that I feel a little better about the rubber sole.

Which is better, raw rubber sole or rubber sole? I think shoes with rubber soles are better.

Summary. Each has its own benefits.

Rubber foam bottom: it has the characteristics of excellent elasticity, good tear resistance, aging resistance, corrosion resistance, electrical insulation and so on. The rubber shoe sponge midsole is an inexpensive low-grade rubber product.

The pursuit of low cost, the use of inorganic and organic foaming agents, reducing the amount of expensive organic foaming agents can not only meet the performance requirements, but also reduce costs.

Rubber soles: By adding various additives, the rubber soles have been greatly improved in terms of wear resistance, oil resistance, electrical insulation, anti-static and acid and alkali resistance. It has the characteristics of light weight and good wear resistance.

The rubber bottom and the rubber foam bottom are good.

Each has its own benefits. Rubber foam bottom: it has the characteristics of excellent elasticity, good tear resistance, aging resistance, corrosion resistance, electrical insulation and so on.

The rubber shoe sponge midsole is an inexpensive low-grade rubber product. The pursuit of low cost in the world, the use of inorganic and organic foaming agents, reducing the amount of expensive organic foaming agents can not only meet the performance requirements, but also reduce costs. Rubber sole sole:

By adding various additives, the rubber sole has greatly improved its burn resistance in terms of wear resistance, oil resistance, electrical insulation, anti-static and acid and alkali resistance. It has the characteristics of light weight and good wear resistance.

Rubber sole generally has a high specific gravity (i.e. unit density) is a vulcanization process, but the first line of anti-slip and wear-resistant square surface is the first choice for shoe materials at this stage (except for novel composite materials), which is suitable for outdoor shoes, running shoes, basketball shoes, etc. Celery and foam bottom is a foaming process, the mainstream of the industry is to use EVA foaming, which is lighter than other materials, but the price is that other physical properties are not as good as rubber soles, generally with rubber to form soles, jogging shoes, long-distance running and other functional shoes. The rubber foam bottom is based on the rubber bottom and the foam bottom, is a rubber foaming function (we know, if the rubber is 1 to 1, the rubber foam is generally 1 to do), the advantage is that it has the high wear resistance of a part of the rubber, and has the characteristics of the foam bottom is lighter than the traditional rubber (of course, the physical properties are not as good as the rubber bottom, but better than the foam bottom), the disadvantages are also obvious, and the processing operability is difficult.

I hope I can help you, if you are satisfied with my service, please give a thumbs up, and I wish you all the best.

The difference between rubber primer and ordinary primer:

1. The advantages are different.

The rubber sole has high elasticity, high abrasion resistance, and can withstand multiple bending, stretching, compression without destruction, improving comfort and reaction speed. It is also resistant to acids and alkalis, so it is suitable for wearing on rainy days. The rubber outsole is more wear-resistant than ordinary rubber soles, mainly because of the additives added to them.

2. The additives in the production are different.

The materials of the outsole are generally synthetic rubber and reinforcing agents. Rubber soles can be made of natural rubber or synthetic rubber without additives.

(1) Wear-resistant rubber: The wear-resistant rubber and toughness are very good, so it is very durable, and this rubber material is generally used on the outsole of tennis shoes.

2) Environmentally friendly rubber: also known as ** rubber, this rubber outsole contains up to 10% ** rubber, the main purpose is to protect the environment.

3) Air rubber: Rubber contains air, which has a certain shock absorption function, but it is not very wear-resistant, and it is not very widely used.

4) Viscous rubber: Viscous rubber is characterized by good flexibility and is very non-slip, and is generally used in indoor sports shoes.

The rubber sole has high elasticity, high abrasion resistance, and can withstand multiple bending, stretching, compression without destruction, improving comfort and reaction speed. It is also resistant to acids and alkalis, so it is suitable for wearing on rainy days. The rubber outsole is more wear-resistant than ordinary rubber soles, mainly because of the additives added to them.