The wireless router has wifi directly, why should it be set up as wifi

To put it simply, a wireless router adds an antenna on the basis of a wired router, so as to realize the mode of multiple people sharing a broadband;

Wireless router dial-up Internet access can only use one account and password, if set up, multiple people can share a broadband; The people in your dormitory can access the Internet by entering the network key after searching for the signal on the wifi on their mobile phones; We use JCG in our dormitory

JHR-N805R Book Vertical Wireless Router, hehe.

You need to set it up on your computer, and the specific steps to reset the wifi hotspot are given below

Materials required: Mercury router as an example.

1. Open the browser on the computer, then wheel ruler or enter the router management address (this address is marked on the back of the router) and go to.

2. After entering the router login interface, enter the password of the router management trapper, and click "Enter".

3. Click on the "Wireless Settings" option on the router management interface.

4. Change the hotspot name and connection password for the wireless hotspot, and click "Save" to reset the wifi.

It may be caused by the wrong settings of the wireless router, it is recommended to reset the wireless router to factory mode, and then set the corresponding Internet access parameters.

When the wireless router is powered off, hold or hold the reset hole or button on the wireless router for about ten seconds, wait for the indicator lights to turn off and turn on, the wireless router will restore the factory settings, and then connect to the computer for settings;

Any browser on the computer, enter the address bar for specific parameters See the parameters on the back of the wireless router), enter the account and password to log in to the wireless router manager background;

Setup Wizard - Next;

The default wireless router selects the Internet access method, the next step;

Enter the account number and password given by the operator when you report the installation of the network cable, and the next step;

6. Set up the wireless network account (SSID) and encryption password, next step;

7. Click Done.

If it is a laptop, turn on the wireless network card signal.

You follow my steps to troubleshoot the problem.

1 Use ordinary pope to set up the wave number first and see if you can access the Internet. If it can, then it proves that the network is good. If you can't, that is, the network problem, call the network service provider** and ask them to solve it.

2 Reset the router and the cat, connect the router to the cat, and then enter the router settings page. Follow the instructions of the wizard to set up the wave number connection, and then use the routing wave number. If you can wave the signal, you're done.

If you can't wave the signal, it is likely that there is a problem with the router. Replace the router and try again.

A network cable connects one end to the computer and the other end to any port 1, 2, 3, and 4 of the router, but not to the WAN port.

Enter or enter in the browser, press enter and enter the account password admin to enter the router settings.

After the simple setup is completed according to the prompts, restart the router, connect the main line (the cable that the broadband company gives you to the home) to the router WAN port, it will automatically dial, and you can link your own wireless network after success.

The router is powered on.

A device that can connect to the Wi-Fi network, such as a mobile phone or laptop.

Connect to the wireless signal from the router.

Check what the gateway address is for connecting to the wireless, which is generally the default.

Open your browser and enter the gateway address you see.

Generally, after opening, you will see the login interface, the initial account and password are on the back of the router, enter the account password to enter.

Run the wizard to select PPPoE dial-up according to the prompts, enter the broadband account password, change the wireless user name and password, and finally click OK to save, restart the router, and the setting is complete.

You can set it up with your mobile phone, and the specific steps to set up a wifi router with your mobile phone:

1. Connect the wireless router with your mobile phone.

2. Open the browser on the mobile phone, enter the specific address in the address bar to find on the router), and then press enter to enter the router management login page. Then enter the router management account and password (also look for it on the router) and click "Sign In".

3. Set the connection type in "Network Parameters" and "WAN Port Settings", there are generally 3 modes to choose from: virtual dial-up (PPPOE), which is the more commonly used dial-up Internet mode in the home. 2.

Dynamic IP is mostly used in the case of sharing Internet access. 3.Static IP, generally some cells fiber-to-the-home, or go to the operator's application for a private line.

Select the correct type of network connection and set it up based on the information provided by your network operator.

4. Then click "Wireless Settings" - "Basic Settings" to set the name of the WiFi, "Wireless Security Settings" to set the password of the WiFi, select "WPA PSK, WPA2 PSK", and set the PSK password to be the password of the WiFi.

5. Restart the router after the settings are complete.