What are the construction safety protection measures and what are the construction safety measures?

The construction site lines are buried with cables, and all cables are inspected without damage or cracks, and the cables meet the standards.

All electrical equipment, machinery, and electrical equipment must be operated and maintained by full-time electricians or licensed operators, and non-electricians or operators are not allowed to use mechanical and electrical equipment at will.

Electricians should master safety protective equipment.

The basic knowledge of use and electricity and the performance of the equipment used, the various measuring instruments used by electricians and a class of power tools with insulation standards should be tested according to the regulations to meet the measurement requirements.

For electric tools that have been out of service for a long time, such as vibrating rods, stone grinders, etc., before reactivation, the insulation resistance test should be done before it is qualified, and the test results should be recorded.

There are six main aspects of safety construction measures: foundation pit engineering, formwork engineering, tower crane engineering, scaffolding engineering, demolition engineering and underground engineering measures.

The purpose and method of safety education and training. Safety education and training include three stages of education: knowledge, skills and awareness. Safety education and training should not only enable operators to master the knowledge of safety production, but also show safe behavior correctly and conscientiously in the process of operation.

Safety education. Make the operator understand and master the potential risk factors and preventive measures in the process of production operation.

Safety skills training. It enables operators to gradually master safety production skills, obtain perfect and automated behaviors, and reduce errors in operation.

Security Awareness Education. It is to motivate the operator to consciously adhere to the practice of safety skills.

1.Foundation pit engineering: According to the theory of "space-time effect" to guide the excavation support.

2.Formwork engineering: After the test and release, a special person must be organized to conduct a technical review.

3.Tower crane engineering: The foundation reinforcement is strictly in accordance with the requirements of the manual.

The safety and security measures at the construction site are:

1.Implement the responsibilities of the safety department, implement responsibility management, and the construction manager department bears the responsibility of controlling and managing the construction production schedule, cost, quality, safety and other objectives. Therefore, it is necessary to take on the responsibility of safety management and safe production at the same time.

2.Establish rules for the safety production responsibilities of personnel at all levels, and clarify the safety responsibilities of personnel at all levels.

3. The construction matters shall pass the safety production qualification examination of the supervision department and be recognized. All personnel engaged in production management and operation shall pass the safety review of the company and construction matters according to the production content they are engaged in. In addition to the company's safety review, special operation personnel are also required to participate in the safety operation assessment according to the limit and resolutely work with a certificate.

When there is a phenomenon of unlicensed operation of special operations on the construction site, the construction matters must bear the management responsibilities.

4. The construction manager department is responsible for the state inspection and approval of the objects in the construction and production, and the management responsibilities of the state of the objects that are missed and out of control, and accept the economic losses arising therefrom.

5. All management and operation personnel are required to enter into a safety agreement with the construction manager department and make safety guarantees to the construction affairs manager.

6. The physical examination of the implementation of safety production responsibilities should be carefully and carefully recorded as one of the original materials for distribution and compensation.

Site construction safety measures.

The first is the construction site safety protection measures.

1) Personal safety protection requirements for the construction site.

1. Safety helmet regulations: Once the construction personnel enter the site with the stool, they must correctly wear the safety helmet that meets the standards, yellow is the safety helmet for the management personnel, red is the safety helmet for the inspectors, and white is the safety helmet for the workers, (material, carbon fiber or fiberglass).

2. Safety belts: All workers who operate above the height of meters from the ground are fastened with safety belts, and there is no fixed place around, and brackets are erected to support the work of workers, so that their operators are in a safe state at any time.

3. Protective glasses: All construction personnel who enter the construction site are equipped with protective glasses.

4. Labor protection shoes: All construction personnel who enter the construction site are equipped with labor protection shoes to prevent their feet from being damaged by hard objects on site.

Construction site safety protection measures, let's take a look at today's article.

Safety precautions for construction sites:

Requirements for protective materials:

1. Steel pipe: weldable steel pipe with outer diameter of 48mm and wall thickness, without serious rust, bending, flattening, cracking and welding.

2. Fasteners: There must be a factory qualification certificate, and the fasteners must not have cracks, porosity, sand holes, loose or other casting defects that affect the use performance. When the bolt tightening torque is reached, no damage shall occur. The torque of the fastener is generally.

3. The scaffold board can be made of steel and wood scaffolding, and the mass of each piece is not more than 30kg.

4. Other materials must meet the requirements of national specifications, such as safety nets, safety helmets, safety belts, electrical boxes, leakage protectors, cables, etc.

3. "Five borders" protection.

"Five borders" protection, that is, the safety protection facilities of the building facing the edge, the balcony edge, the house edge, the lifting port edge, and the foundation pit edge of the project under construction;

1. Double-layer fences of more than 1 meter or safety nets must be set up for border protection;

2. The protective railing for high-altitude operations on the edge should be closed with a safety net from top to bottom;

3. The height of the edge of the excavation of foundation pits, ditches and grooves is not less than that of a protective fence.

Fourth, "three treasures" and "four mouths" safety protection.

The "three treasures" are the three treasures of construction workers' safety protection, namely safety helmets, safety belts, and safety nets; The "four-mouth" protection refers to the safety protection facilities of the reserved holes, elevator shafts, passages and staircases of the projects under construction;

1. Protective railings should be set up at the elevator shaft and staircase, protective sheds should be erected at the passage entrance, and protective railings should be set up at the reserved openings according to the specific situation, and the caps should be added;

2. All personnel entering the construction site should wear safety protection equipment correctly, and the dense safety net should be hung on the outside of the construction project for closure.

Reinforcement is no trivial matter, construction site safety is very important, only do a good job of construction site protection measures, in order to make each building reinforcement project better to complete, successfully completed.

5. Safety management measures.

1. The project team leader or the project installation contractor is the first person responsible for the safe construction and is fully responsible for the safe construction on the site.

2. The on-site safety administrator is a full-time person for on-site safety construction, who is responsible for the supervision and inspection of safe construction.

3. Strengthen the publicity of safe construction, hang slogans and warning signs in a prominent position on the construction site to remind the construction personnel.

4. Personnel entering the construction site must wear safety helmets.

5. Construction machinery and tools should be routinely inspected before use every day, especially the wire rope and safety belt should also be inspected once a week to ensure that they are in good condition.

6. During the installation process, the safety protection of on-site equipment, equipment and completed projects should be taken into account. When the wind speed is 10m s, sometimes the hoisting work should be stopped, and when the wind speed reaches 15m s, all work must be stopped.

7. Wear gloves when installing and transporting components and plates.

There are safety nets, safety belts, safety helmets, fire isolation belts and other measures.