HOW DO I INSTALL XP ON ANOTHER HARD DRIVE UNDER WINDOWS XP? Difficult questions

Hello,Install the system can only be in the windows pre-installation environment,For what you said,You can unplug the 80G,Plug in the 500G,Set the optical drive on the motherboard to boot,Put it into the system disk,Repartition after entering! After that, you can install it! You can also use a disc and don't need to unplug 80g, on the Internet**ghost system, unzip to a non-installation disk and run the program as decorated in the figure, click to browse the selection file, and select the installation drive letter below!

Make sure you don't have any important files on the disk you want to install! Click Done, restart, don't care, after restarting, find the files in the C drive and the disk you installed! , install the disk up multi(0)disk(0)rdisk(0)partition(1) windows="microsoft windows xp professional" /noexecute=optin /fastdetect

Copy to C,Restart the computer and install it yourself, and after you install it, you can use the system in 500g!

Install the system with ghost without repartitioning! Just need a disk and you're good to go, and copy the data you need to other places before installing! Copy it back when you're done!

Put your 500g hard drive from a new partition and don't connect the 80g hard drive while partitioning.

You set the hard disk you want to install the system on as a slave disk, use ghost, and select the image of the disk to the disk.

First, you have to make sure that the 500G main partition is the active partition (can be activated in the fdisk), either the active partition or the system cannot be booted, second, your 500G hard disk must be plugged into the SATA0 (or SATA1, anyway, the first) socket on the motherboard, if the system is not yet recognized and cannot be booted, then you have to enter the BIOS of the motherboard to open SATA. Third, if you want to directly transfer the 80G XP system to the 500G disk, you must first make sure that the capacity of the main partition on the 500G disk (used as the C disk) is as large or larger than the C disk capacity on the 80G disk, not small. Then you use the partition option function in the ghost software to copy the partition to the partition, and that's it, remember not to make a mistake in the middle of the disk.

Another way: first use this software to make a partition image of the 80G system and save it to the logical partition of the 500G hard disk, and then use the optical drive to boot the partition image to restore the partition image to the main partition of the 500G disk.

More than 2 partitions are required, Win7 in C disk, D disk is larger than 30GB, and X is installed in D disk.

You can use the partition tool diskgenius partition,Or**XP system disk,After decompression,Install it directly to the D disk,GenerallyGhost has a hard disk installer,The rest is fully automatic,So there will be 2 options when you start.。

Is the landlord going to install a dual system? There are many tutorials on the Internet to install dual systems, and there is a link here.

You clone Win7 to the E or F drive, install the XP on the C drive (boot disk), and then start the repair software next. Just set the boot order.

It's the same as the first time you install XP,That is, when you choose to install the drive letter, remember not to click to the C disk,Install it to other disks on the line,The installation process is the same,Another point is to install the win7 first,After installing the XP, the system will not appear menu directory for you to select the system,You can only enter the XP,This solution can be solved by bcdautofix,The operation is very simple。 But don't forget to activate win7 from scratch when you're done

With manual installation, select the area and install it according to the panel you want to install.