Whether the diskless system can install two different types of network card drivers

Hello, after the diskless system is installed with an independent network card, there may be two drivers after installing the driver, one is integrated, and the other is an independent network card. Disable the driver of the integrated network card to use it normally, otherwise an error will occur later.

To uninstall the original unusable driver, you can uninstall the device manager first.

The MAC address, also known as the network card, is the only (64-bit) hexadecimal physical address for a single network card, which has been assigned by the factory before it leaves the factory.

The purpose of the MAC address The MAC address is fixed in the network card, and the MAC address of each network card is different. In the production process of the network card, the manufacturer will burn a set of numbers in its EPROM, this set of numbers, each network card is different, this is the MAC (physical) address of the network card. Due to the uniqueness of the MAC address, it is mainly used to identify users in the network.

If the IP address is to be the same, you can set a static IP.

It doesn't matter what system you install.

Ghost two hard disk C on it!

Are you opening all the machine files at the same time,,If you open Hu Heng at the same time, it is possible that this situation will occur,,You can try to open several units at a time to do this if it still doesn't work,You see if it's an insider Liang Cun setting problem,And whether you have loaded and。

It's best to configure the same if you do diskless.,Otherwise, it's very troublesome.,It's not good to do a machine for a long time.,,Then you won't be able to achieve the effect of diskless.。。。

Ruiqi diskless first to hit the driver of the machine to open the superuser,Clients and servers are available,,The direct way to find the next is very simple,Open the super restart,And then the driver wizard will close the superuser after the driver is good.。。 You don't need to upload it. The system only needs to be uploaded once, and then it can be solved with a super user.

It must be configured with the same model, that is to say, the configuration of the type should be divided into a group and the driver should be installed once.

Of course, it is possible to install a single drive in a machine, but that ......There should be an introduction in the system disk, take a closer look at the ......If you really can't solve it, find a professional!

You forgot the important point: turn on the superuser.

On the server, put the machine you want to install, open the superuser, then install the driver on the boot, turn off the machine, close the superuser on the server, and start it again and you won't find that you want to install it.

Is the computer configuration different in the guest room? That's a hassle.

It's best to back up the system image, and then set the superuser to go in and install the driver directly. It's best to install it in Device Manager. There is no additional software that comes with the driver.

Is it PXE?,What kind of system is diskless?。

Easy to play diskless words on the diskless server to open a super workstation for this computer,Remember that this machine has to be shut down,Turn on the super to boot,Then load the driver to this computer,After the loading is completed,Delete the deleted,Shut down,Then turn off his super workstation mode,OK,The diskless of the network maintenance master is directly on this computer on the super administrator account,Load the driver,Save and exit it,Other diskless system operations are almost the same。

It's okay to open a super lane.,I'm using it here.,It's relatively simple to operate in such a situation.,Different graphics cards can also be superimposed and configured.,It's convenient and fast and doesn't conflict with each other.。

Server systems are all installed on servers.

Open a superuser, it can only be like this. If you want to install this machine separately, you can copy a separate system package for this machine. Other machines use a different package.

Or copy the driver to the client's virtual hard disk on the server, and set it up to that road when installing. The diskless system runs a partition on the server as the client's virtual hard disk, copy the installation file, must be placed in the partition of the client's virtual hard disk, other disks do not seem to be recognized, such as the client has a system disk and other disks, so that the client's machine can find this file.

Generally, diskless clients need to install hardware drivers, and the super workstation mode needs to be enabled.

If it's not a super workstation, it will be restored if you reboot.

The way to open a super workstation is different for each gaming platform, but it is basically the same.

I use Yi Leyou in this Internet café,In the server's Yi Leyou console - client management,Select the machine that needs to install the driver,Right click to open the super workstation and it's done,I think everything else without disk should be about the same。