What should I do if the computer can t be turned on when the water is in, and what should I do if th

First of all, power off:

Then take the keyboard apart or do a handstand, and then carefully check, if you are sure that the liquid is not leaking into the computer, then for distilled water or tap water, etc., just let it dry, for drinks, such as Coca-Cola, etc., these drinks will leave sticky sugar after the water evaporates and dries, then you need to use low-strength alcohol to wipe it down. Pay attention to every corner when wiping, especially the part of the rubber pad. Okay, it's that simple, how?

Are you already getting started?

If you accidentally splash water on the keyboard, you should turn the machine upside down as soon as possible to prevent water from flowing into the motherboard and causing catastrophic consequences. Then unplug the power and the battery to forcibly shut down, just simply press the power switch to forcibly shut down is not enough, because the main battery may still be short-circuited, so be sure to remove the battery and disconnect the power adapter.

Then use a dry cloth to absorb the water on the surface of the keyboard, try to remove the keyboard to wipe the water on the back, and then dry it in the shade (it is best not to use hot air to blow), and at the same time, it is best to use cold air to blow the inside of the host for a day, otherwise it may be a wisp of green smoke on the west sky.

After the water is dry, if you find that some of the keys are out of order, please check again whether the water on the keyboard has dried out, focusing on checking the position of the keyboard to lead out of the wiring, generally speaking, the current laptop keyboard will not be completely finished because of a soaking in water, as long as the cleaning method is still very hopeful.

Also, if your keyboard is dirty and needs to be cleaned up, buy a good brush that won't bleed, turn off the laptop and stand it on its side, and then carefully clean the gaps in the keyboard. Keep the brush dry and free of water! When you're done, add a bowl of water and a drop of dish soap, moisten it with a cotton cloth and wring it out to clean the surface of the keyboard, and then dry it and you're ready to use.

You dry it out first, fan it all the time, and if the CPU inside doesn't burn out, the computer dries out, and you can turn it on, and if the inside burns out, then you have to take it and fix it.

Ask, is the water on the machine, or the water is not turned on, you try to turn it on, the water is clean.

If it can't be turned on, it is recommended to send it to a maintenance company for professional repair.

In the face of accidental computer water ingress, the treatment method is as follows:

Power off immediately. Disassemble or turn the keyboard upside down to avoid damaging the motherboard. Then carry out a careful inspection, if it is determined that the liquid has not leaked into the inside of the computer, then for distilled water or tap water, etc., first blot with a material with good water absorption, and then dry it; For beverages, such as Coca-Cola, these drinks will leave sticky sugars after the water evaporates and dries, so they need to be wiped with low-strength alcohol.

If you still can't recover your computer after handling it yourself, please send it to a repair station for repair.

The solution to the computer can't be turned on if the computer is flooded:

Brand Model: ASUS.

System version: UX30K723A

Software version: win7

1. If you accidentally sprinkle water on the computer, don't rush to turn on the computer, but should wipe the water on the computer first, preferably with an absorbent rag or something.

2. After wiping, the branch seems to stand up the computer left and right to see if there is any water dripping out, that is, burying the water control that the computer has infiltrated.

3. After making sure that there is no water, turn on the hair dryer and gently blow the water part of the computer to ensure that all parts of the computer are dry.

4. When it is dried with a blower, you can put the computer under the sun and dry it for about half an hour, at which time the water will definitely evaporate and there will be nothing.

5. After all the above steps are completed, you have to try to open the computer, at this time, the general computer can be turned on, this method is actually applicable to mobile phones, of course, there are many waterproof mobile phones now.

6. If you don't wipe and evaporate the water, and start it rashly, it will cause trauma to the computer circuit and circuit board, and you can only go to the after-sales maintenance department for repair.

The solution to the computer can not be turned on when the computer is flooded: remove the battery to dry, use a hair dryer, use a vacuum cleaner, use a hair dryer, and send it for repair.

1. Remove the battery and let it dry.

If your computer isn't soaked in water, but just droplets or mist of water gets into your computer, try removing the battery and power supply and then placing your computer in a ventilated area to dry. The drying time depends on the situation, and generally takes more than 12 hours. If the computer is seriously damaged by water, it is recommended not to try to repair it yourself.

2. Use a hair dryer.

If your computer has a lot of water ingress, but it hasn't reached the point where it can't be turned on, you can use a hair dryer to dry the water inside the computer. However, it should be noted that when using the hair dryer, you should stay away from the computer to prevent the hot air from burning out the internal components of the computer.

3. Use a vacuum cleaner.

If your computer has an obvious malfunction after water gets in, such as not turning on or a blue screen, you can use a vacuum cleaner to absorb the moisture inside the computer. However, it should be noted that when using the vacuum cleaner, you need to disassemble the computer and be careful not to damage the internal components of the computer.

4. Use a hair dryer.

If your computer has obvious problems after flooding, such as not turning on or a blue screen, you can use a hair dryer to dry the water inside the computer. However, it should be noted that when using the hair dryer, you should stay away from the computer to prevent the hot air from burning out the internal components of the computer.

5. Send it for repair. If your computer has a serious malfunction after being flooded, such as not being able to turn on or having a blue screen, it is recommended to send it for repair. Before sending in for repair, you can blow or blot as much water inside the computer as possible, which can reduce repair costs.

Hello Your Inquiry Question 1Disconnect the power cord, remove the battery, and turn on the rear panel. 2.

Wipe the water absorption with dry paper orange towel type destruction, confirm that the water is dry, and then assemble and start the machine. 3.If it still can't be turned on, it may be that the motherboard is short-circuited and burned to the rent, and you need to find a professional maintenance point for maintenance.