What are the chemical components of 304 stainless steel wire? What is the maximum tensile strength o

The chemical composition c can reach 1200MPa

It is 520MPa, and the minimum tensile capacity of the steel wire with a millimeter diameter is kg, and the parameters of 316 stainless steel are from the national standard GB T table, and the tensile force is calculated as follows, 138*PI()*

Tensile strength refers to the ability to withstand tensile force per unit area, and the unit is MPa. Therefore, no matter how large the cross-section of the steel wire is, its tensile strength is only related to the material of the steel wire, and has nothing to do with the cross-sectional area. mpa＝n/mm2＝100n/cm2

Japanese Standard: SUS304 Tensile strength greater than 520N mm2 American Standard: 304 Tensile strength greater than 515N mm2 National Standard GB T1220: Tensile strength greater than or equal to 520515MPa

Chemical composition of 304 stainless steel wire: C: Raid, Si: Mn: Cr: Ni: Ni: S: P: N

Mechanical properties: yield strength (n mm2) 205

Tensile strength 520

Elongation (%)40

The above four standards are just a few of the common standards, in fact, there are more than these standards that mention 304 in ASTM and JIS. In fact, each standard has different requirements for 304, so if you want to determine whether a material is 304, the accurate expression should be whether it meets the requirements of 304 in a product standard, and the material certificate generally needs to issue a test report.

SUS301 (1Cr17Ni7) stainless steel wire, SUS303 (OY18Ni9) stainless steel wire, SUS304 (OCR18NI9) stainless steel wire, SUS304L (OCR19NI10) stainless steel wire, SUS304N (OCR19NI9N) stainless steel wire, SUS304CU (OCR18NI9CU3) stainless steel wire, SUS321 (1CR18NI9TI) stainless steel wire, SUS316 (OCR17NI12MO2) stainless steel wire, SUS316L (OCR17NI14MO2) stainless steel wire, SUS316TI (OCR18NI12MO2TI) stainless steel wire, SUS316N (OCR17NI12MO2N) stainless steel wire, SUS317 (OCR17NI13MO3) stainless steel wire, SUS317L (OCR19NI13MO3) stainless wire, SUS347 (OCR18NI11NB) stainless steel wire, LCR19NI11NB (347H) stainless steel wire, 2CR25NI20 (310) stainless steel wire, OCR23NI13 (309S) stainless steel wire, heat-resistant stainless steel OCR25NI20 (310S) and other materials. Stainless steel wire materials mainly include:

Wait. 304 — i.e. 18 8 stainless steel. The GB grade is 0Cr18Ni9.

Available in: SGS reports. Salt spray test report. Baosteel material certification. Nippon Steel stainless steel material and the proof of the owner. South Korean Pohang material certification.

Our company solemnly promises that the materials supplied meet the national environmental protection standards and EU ROHS standards.

Category range]: stainless steel spring wire (3 4 hard ray, full hard matte line), stainless steel screw wire (stainless steel medium hard wire, 1 2 hard ray), stainless steel full soft wire, stainless steel coil element, bright line, axle line, full soft wire, cold pier line, stainless steel wire rope and other imported easy-cutting lines.

Material hardness]: soft, semi-hard, all hard. The size can be required according to the requirements.

Material Surface]: Bright state.

Executive standard]: GB, ASTM, JIS specifications, has been IS09002 certification. The product has an SGS report and material certificate according to the RoHS directive.

Blank country]: Domestically produced and imported (Japan, Finland, South Korea, South Africa, Taiwan, etc.) all products comply with Chinese GB, AMERICAN ASTM, JIS and other specifications, and have SGS reports and material certificates of RoHS directives. Excellent quality, ** discount, welcome new and old customers to call to negotiate!