-
Buy a router with wireless network, set the username and password on the router, turn on the wireless network on the router, set the password, and you can receive the wifi network at home.
-
Pick up a wireless router! Enable the broadcast function of the wireless router and you're good to go!
-
Summary. 1. Open a web browser, type in the address bar, and press enter.
2. In the login window that opens, enter the username "admin"; The password is also "admin"; Then click "OK" directly.
3. After entering the router setup interface, select "Setup Wizard" on the left, and then click "Next".
4. Select "PPPoE (ADSL Virtual Dialing)" and click to enter the next step.
5. Enter the telecom broadband in the "Internet access" pop-up on the page, enter the broadband Internet access password in the "Internet Password" and "Confirm Password", and then click to enter the next step.
6. Click "Done" and return to the home page to check whether the settings are correct. You can see that the router has successfully dialed in and obtained the IP address for Internet access, and you can try to access the Internet.
Finally, let the computer connect to this wireless network, enter the password and go wireless.
How to change a broadband connection to a wireless connection.
1. Open a web browser, type in the address bar, and press enter. 2. In the login window that opens, enter the username "admin"; The password is also "admin"; Then click "OK" directly. 3. After entering the router setup interface, select "Setup Wizard" on the left, and then click "Next".
4. Select "PPPoE (ADSL Virtual Dialing)" and click Liang Libi to enter the next step. 5. In the pop-up "Internet access" on the page, enter the telecom broadband you handle, enter the broadband Internet access password in the "Internet Password" and "Confirm Password", and then click to enter the next step. 6. Click "Done" and return to the home page to check whether the settings are correct.
You can see that the router has successfully dialed in and obtained the IP address for Internet access, and you can try to access the Internet. Finally, let the computer connect to this wireless network, enter the password and go wireless.
Hope it helps.
There is only a broadband connection and a local connection, and there is no Wi-Fi connection.
Buy a wireless router to do the first talk and a wireless card, then broadband connect to the wireless router and set it up. Then install the wireless network card on the computer, install the wireless driver, and then you can use the wireless network card to connect the wireless pure touch router to the Internet, which is the wireless network connection.
The local connection is not wired, plugged in the network card, but the wireless connection is not displayed.
1. It's automatically hidden, in this case, you can restart the computer with a straight return stance. 2. The computer does not have a wireless network card, you can buy a U disk network card and plug it into the computer. 3. The computer wireless network card driver is damaged or not installed, ** driver, install or repair it.
4. The wireless network connection leakage and connection are disabled, and it can be enabled.
Where is the wireless drive?
The computer has no internet. Turn on the hot spot.
I just can't connect to the Wi-Fi.
What computer are you.
Desktop or notebook.
Desktop. Generally, desktops are broadband connections.
-
1. First of all, touch the mouse cursor to the small network connection icon in the computer taskbar, and you will see the status and name of the current wireless network.
2. Right-click on the network icon and select Open Network and Sharing Center.
3. Then, click the [Change Adapter Settings] text on the left side of the window to select.
4.In this way, you can clearly see the current wireless network connection status, as well as the status of local connection and broadband connection, which is disabled.
5. In this way, we will connect the wireless network first, right-click and select [Disable].
6. Next, for the local connection, that is, the wired network connection, right-click and select [Enable].
7. After the operation is completed, it will be successfully switched to a wired network connection, and the wireless network connection will be displayed as disabled.
-
Connect a wireless router, and after setting it up, you can connect a network cable and turn it into a wired one.
Specific methods: 1. The selected wireless router is better to tplink or dlink, and the setting of other models may not be successful.
2. Connect the router to the computer with a network cable, set up wirelessly, and click to turn on WDS to turn on the bridging function.
3. Then search for the wifi of the mall, the password set below should be consistent with the wifi password of the mall, turn off the DHCP function of the router, and then see if you can go to the Internet directly. If you can, you can connect the POS machine directly to the router.
-
It seems that I have to be the only one, hehe, just kidding, solving the problem is king, your answer has 2 kinds, the first is that you said that the dial-up can't be dialed, you didn't say that it was dialed through the router, you said that the password and account number are correct, then you may be using the computer itself with the broadband connection dialed number, if you really do this, then the result is that it can't be dialed now. Solved with my second solution.
2.You didn't say anything about the brand, so you look at the bottom of the router, there is a ** that enters the router. Now the most on the market, such as tp-link d-link fast and so on, the router enters**Generally, enter it directly in the browser address, and the username and password are also under your router, and the general username and password are admin.
After entering, there is a setup wizard, and you can set it up yourself, but there is one thing to remind you, you choose PPOE to access the Internet, and the account password will appear below After you enter it, select Auto Connect Next, save it, and restart the router.
In the future, there is no need to dial a broadband connection, turn on the computer and go directly to the Internet. Solve the problem of hehe, it's cold, and you're tired of typing, and you can give points, hehe.
-
Wired network: A computer network that uses coaxial cables, twisted pairs, and fiber optics to connect.
1. Unplug the network cable of the access router and directly connect to the computer network cable interface. In this way, the wireless cannot be used.
2. You can connect to the computer through the output port behind the wireless router with a network cable, so that the wireless can still be used, but the router may have to be reset again.
-
After connecting the network cable, set the IP address of the local connection--- the attributes of the local connection ------IPv4--- automatically obtain the IP address
-
I'm going to have to reset my router
-
1. Run Command Prompt as Administrator: Enter "cmd" in the "Start" column and "Run as Administrator".
2. Enable and set the virtual wifi network card: run the command: netsh wlan set hostednetwork mode=allow ssid=username key=password, enter, (the username and password are arbitrary, but remember, the password is better than 8 digits).
3. Open the "Network and Sharing Center" and "Change Adapter Settings", and there is an extra item "Microsoft Virtual WiFi Miniport Adapter", which means that the settings in front of you are correct. (need to disconnect all in the Wi-Fi connection in the bottom right corner), rename it to virtual wifi for convenience. If not, just update the wireless network card driver and you're good to go.
4. Set up Internet connection sharing: In the "Network Connection" window, right-click the network connection that has been connected to the Internet, select "Properties" and "Sharing", and tick "Allow other ......Connect (n)" and select "Virtual WiFi".
Once confirmed, the word "Shared" will appear next to the NIC icon that provides sharing, indicating that the "Broadband Connection" has been shared to "Virtual WiFi."
Turn on the wireless network: Continue running in the command prompt: netsh wlan start hostednetwork
At the same time, create a new txt file with the following content: netsh wlan start hostednetwork and save it as .BAT format.
The next time you turn on the Internet, click on the file to start.
At this point, the red cross of the virtual wifi disappears, the wifi base station has been set up, and the host has been set up. It can be used in connection.
Show wireless network information command: netsh wlan show hostednetwork
Note: A laptop or desktop with a wireless card is used as the host.
-
360wifi assistant, baidu's small wifi online is not expensive to buy yourself. They plug in the wifi, but when it becomes wifi, the speed will drop a lot, oh, in the Internet café, the company is very practical. If you are at home, it is recommended to install a router directly.
-
Installing a wireless router will do the trick.
-
Then remove the l router, the basic function of the router is to replace the dialer on the computer, so after using the router, you don't need to use a broadband connection, plug in the network cable and already connect to the network, the computer is connected to the network through a local connection. So you don't even need to click on a broadband connection to connect. If you don't want to use the wireless connection, you can turn off the wireless switch.
-
How to turn wifi into a network cable to connect to a computer, wireless to wired.
-
Click on the "Internet Neighbors" on your laptop - there is a "View Network Connection" in the second row on the left, directly disable "Wireless", and turn on "Local Connection" to plug in the Internet cable! And then it's the same Internet operation as your desktop.
This is not modified, it is a secure deployment, HTTPS uses a certificate for access, and it is more secure with encryption. >>>More
It can't be like this!!
Pure oxygen will exacerbate the oxidation of the human body! >>>More
How would you transform your basement into that feel? Is it possible to live in the basement? In fact, everyone should know that for all of us, what we can see is that we want to transform the basement into what we like, and what we should be able to see is that the basement should actually be in the actual transformation process, we should ensure that we like a look, so that the basement can make it look better. >>>More
Personally, I think it would be better to try the ceiling, or preserve it in its original form, and reinvent it with paint and other decorations. If you want to transform the living room into a game hall, you don't have to worry about the electronic equipment, and the furniture can also be changed to achieve the effect we want, but the structure on the top may have troubled many people, so we want to carry out a comprehensive transformation, and if we want to make the best effect present, then we must deal with some details more perfectly. <> >>>More
That's fine. It's better to be outgoing. In this way, others will think that you are very cheerful, not pretentious, just be yourself. Maybe your boyfriend just likes you like this. If you're afraid that your boyfriend will misunderstand, play with him more and less with other boys.