How to design a bulk cement tank How to put cement out of a bulk cement tank?

<> basic parameters. Tank height: bracket.

Height of the tank and diameter of the body:

Bracket spacing: tank weight: 100kn

Maximum cement loading: 800kn

Foundation burial depth: d=

Foundation concrete strength grade: C35

Base size. The thickness of the foundation is hc=

The width of the foundation is taken.

Calculation of the bearing capacity of cement tank foundation.

pmax=（f+g）/bc2+m/w

pmim=（f+g）/bc2-m/w

Consider the basic calculation formula with a large eccentricity:

PKMAX=2(F+G) BC2 3BCA: F-The vertical force of the cement tank acting on the foundation, including the self-weight of the tank body and the self-weight of the cement.

f g - the self-weight of the foundation and the self-weight of the soil on the foundation.

I'm not in your business! But I think if you want to meet your requirements, you must bring power, air compressors and other devices, and the cement air compressor will be unloaded like a bulk cement truck to lose as much as you want into the mixer truck! Stop the air compressor to stop the ash intake.

You can consult an organization such as a special vehicle manufacturer! Search"Bulk cement trucks"The manufacturer will definitely reply to you with a solution, even if you don't buy their stuff, at least you know how to reply to the boss!

1. Air compression: that is, the cement truck is equipped with a compressor, which forms a lot of pressure in the cement tank, and under the action of pressure, the cement is transported to the storage cement tank through the pipeline.

2. Induced draft fan: that is, there is an induced draft fan at the place of the cement tank, and the negative pressure is formed in the cement tank when the induced draft fan is started, so that the cement in the cement truck tank can be sucked into the storage tank through the pipeline.

Tips for buying cement

1. Look at the time and see the production date of the cement. The performance of cement beyond the expiration date of 30 days has decreased. The strength of cement decreases by 10%-20% after three months of storage, 15%-30% after six months, and 25%-40% after one year.

High-quality cement, more than 6 hours to solidify. The quality of cement that cannot be set for more than 12 hours is not good.

2. Look at the appearance, see whether the paper bag packaging of the cement is intact and whether the identification is complete. The logo on the paper bag is: factory name, production license.

Number, cement name, registered trademark.

Variety (including breed code), label, year, month, day and number of packaging.

3. Look at the color, observe whether the color is dark gray or dark green, and the cement strength is relatively low if the color is yellow and white (yellowing indicates that the clinker is raw burning, and whitish means that the slag content is too much).

4. Twist the feel, twist the cement powder with your fingers, and feel a little fine, sand and powder, indicating that the cement fineness is normal.

Structure and working principle of bulk cement tank:

The bulk cement tank is generally used in the cone of the storage tank that is easy to hang and block, and a ring of annular pipes is added to the outer wall, and a plurality of nozzles are separated from the annular pipe at equal distances to the cone of the storage tank. It is important to note that:

1. Try to remove water in the compressed air, otherwise it is easier to agglomerate.

2. The nozzle must be equipped with a one-way valve to prevent the cement backfilling in the warehouse from blocking the annular pipeline.

Structural features of cement tank:

1. Cement tanks are usually used as supporting products for concrete batching plants (buildings).

2. It is suitable for loading bulk cement and dry fly ash, and has the characteristics of rainproof, moisture-proof and easy to use; The size of the specification can also be made according to the size required by the customer.

3. It is generally a cylindrical support structure, and the upper part of it has dust removal equipment to prevent dust leakage, and the lower part is equipped with an arch breaking device to prevent the powder from agglomerating, so that the powder is discharged smoothly, and is equipped with a material level sensing voltaic lifting equipment, which can grasp the use of materials in the warehouse at any time.

Fourth, the bulk cement conveyor is generally used to send the powder gas into the warehouse; According to the structure of the cement silo, there are generally two ways to discharge:

1. The lower part is connected with the screw conveyor, and the powder is fed into the powder for metering with the screw conveyor.

2. Pneumatic conveying Xun Tingming (cement tank with special structure).

Structure and working principle of bulk cement tank:

Bulk cement tanks are generally used in the cone of the storage tank that is easy to hang and be blocked, and a ring of annular pipes is added to the outer wall, and a plurality of nozzles are separated from the annular pipeline at equal distances to the cone of the storage tank. It is important to note that:

1. Try to remove water in the compressed air, otherwise it is easier to agglomerate.

2. The nozzle must be equipped with a one-way valve to prevent the cement backfilling in the warehouse from blocking the annular pipeline.

Structural features of cement tank:

1. Cement tanks are usually used as supporting products for concrete batching plants (buildings).

2. It is suitable for loading bulk cement and dry fly ash, and has the characteristics of rainproof, moisture-proof and easy to use; Specifications and sizes can also be made according to the size required by customers.

3. It is generally a cylindrical support structure, and the upper part is equipped with dust removal equipment to prevent dust leakage, and the lower part is equipped with an arch breaking device to prevent the powder from agglomerating, so that the powder is discharged smoothly, and is equipped with a material level sensing device, which can grasp the use of materials in the warehouse at any time.

Fourth, the bulk cement conveyor is generally used to send the powder gas into the warehouse; According to the structure of the cement silo, there are generally two ways to discharge:

1. The lower part is connected with the screw conveyor, and the powder is fed into the powder for metering with the open rotation conveyor of the Luoxun Hall.

2. Pneumatic conveying (for cement tanks with special structures).

1. The working principle of bulk cement tanks.

2. Internal schematic diagram of bulk cement tank.

3. The internal structure of the bulk cement tank.

4. Diagram of the internal structure of the bulk cement tank of Nianzhi.

1.Structure and working principle of bulk cement tank: bulk cement tank is generally used in the cone of the storage tank is easy to hang and block, add a ring of pipes on the outer wall, and separate a plurality of nozzles from the annular pipe at equal distances to the cone of the storage tank.

2.It should be noted that: 1. Try to remove water in the compressed air, otherwise it is easier to agglomerate.

3.The nozzle must be equipped with a one-way valve to prevent the cement backfilling in the silo from blocking the annular pipeline.

4.Structural characteristics of cement tank: 1. Cement tank is usually used as a supporting product of concrete mixing plant (building).

5.It is suitable for loading bulk cement and dry fly ash, and has the characteristics of rainproof, moisture-proof and easy to use.

6.Specifications and sizes can also be made according to the size required by customers.

7.Generally, it is a cylindrical support structure, and its upper part has a dust removal device to prevent dust leakage, and the lower part is equipped with an arch breaking device to prevent powder from agglomerating, so that the powder is discharged smoothly, and is equipped with a material level sensing device, which can grasp the use of materials in the cangwang high cover at any time.

8.Generally, bulk cement conveyor trucks are used to send powder gas into the warehouse.

9.According to the different structure of the cement silo, there are generally two ways of unloading: the lower part is connected with the screw conveying trap machine, and the powder is sent to the powder for metering with the screw conveyor.

10.Pneumatic conveying (for cement tanks of special structure) is adopted.

Summary. Hello dear

The foundation of the cement tank is used to protect and fix the cement tank and prevent the cement tank from collapsing, and the foundation is the step of installing the cement tank, and the foundation can be done to ensure the smooth progress of the following procedures, so it must be used to pay attention to the following points when building the foundation. 1.Before building the foundation, the foundation map should be made, and the foundation map must be made carefully when making the foundation map, and the height of the cement tank should be combined with the height of the cement tank, the weight, and the height of the legs should be combined to make the foundation map, and the depth of the foundation pit should not only be combined with the nature of the cement tank itself, but also combined with the environment, and the root should be combined with the natural climate to make the foundation map; 2.

When constructing the foundation map, it is necessary to use professionals to build it in strict accordance with the foundation map; 3.The person who constructs the foundation plan shall not modify the foundation plan without authorization, and may hold a meeting if he feels that the foundation plan is not appropriate; 4.When building a foundation map, be careful not to build it on rainy days; 5.

If it rains when installing the cement tank after the foundation plan is built, do not install the cement tank again, wait for the weather to be fine and install it, and re-check the foundation for safety during the installation period; 6.After the above preparations are made, the cement tank can be installed.

1500 cubic meters of large vertical cement tank production method.

The foundation of the cement tank is used to protect and fix the cement tank and prevent the cement tank from collapsing, and the foundation is the step of installing the cement tank, and the foundation can ensure the smooth progress of the following procedures, so we must pay attention to a few points when building the foundation. 1.Before building the foundation, the foundation map should be made, and the foundation map must be made carefully when making the foundation map, and the foundation map should be made in combination with the height, weight, and height of the legs of the cement tank, and the depth of the foundation pit should not only be combined with the nature of the cement tank itself, but also combined with the environment, and the root should be combined with the natural climate to make the foundation map; 2.

When constructing the foundation map, it is necessary to use special personnel to build the foundation map in strict accordance with the foundation map; 3.The person who constructs the foundation plan shall not modify the foundation plan without authorization, and may hold a meeting if he feels that the foundation plan is not appropriate; 4.When building a foundation map, be careful not to build it on rainy days; 5.

If the foundation map is built, when the cement tank is installed in rainy weather, do not install the cement tank, and wait for the weather to be fine in the installation, before the installation of the foundation in order to re-check the foundation during the whole period of Anchuntan; 6.After the above preparations are made, the cement tank can be installed.

Hello, you see that you are welcome to continue to consult, if it is convenient, you can give a like, thank you [than heart].

Basic drawings of 300 tons of cement tank bulk cement tank Preferably you can send the drawings to me directly.

<> basic parameters.

Tank height: bracket.

Height of the tank and diameter of the body:

Bracket spacing: tank weight: 100kn

Maximum cement loading: 800kn

Foundation burial depth: d=

Foundation concrete strength grade: C35

Base size. The thickness of the foundation is hc=

The width of the foundation is taken.

Calculation of the bearing capacity of cement tank foundation.

pmax=（f+g）/bc2+m/w

pmim=（f+g）/bc2-m/w

Consider the basic calculation formula with a large eccentricity:

PKMAX=2(F+G) BC2 3BCA: F-The vertical force of the cement tank acting on the foundation, including the self-weight of the tank body and the self-weight of the cement.

f g - the self-weight of the foundation and the self-weight of the soil on the foundation.