The mobile phone fell into the water, how to deal with it?

1. Rapid salvage.

If the phone falls into the water, you need to salvage it immediately, wipe it clean with clean toilet paper or cloth, and place the motherboard facing up during the wiping process to avoid a large amount of moisture flowing into the inside of the phone.

2. It is forbidden to turn on the machine.

Although the moisture on the surface of the mobile phone is wiped dry, there is still moisture in the host, and if it is turned on immediately, the motherboard of the mobile phone will be burned, so the mobile phone should not be turned on immediately when it is fished out.

3. Drying treatment.

Turn on the hot and cold air settings alternately on the hair dryer, align the opening of the mobile phone, such as the charging port, headphone jack, SIM card slot, etc., and blow it several times to evaporate the water inside the mobile phone, and then put it into the rice to dry it again.

4. Try to turn it on.

After doing the above steps, you can try to turn on the phone, check whether the buttons of the mobile phone, fingerprint recognition, screen touch, mobile phone speakers, etc. are normal, if normal, you can use it normally, if it is not normal, it needs to be repaired.

If you are using a vivo phone, you can check the following mobile phone liquid inlet treatment methods:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to absorb the water in the gaps; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

3.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Repair spare parts** inquiry.

Make an appointment for service. Repair services.

Mobile phones have become an indispensable part of people's lives and entertainment, but many friends will accidentally drop their mobile phones into the water, for this kind of thing, basically every day. Many friends encounter mobile phones falling into the water, and the mobile phones are scrapped due to improper operation. So what to do if your phone falls into the water?

What should I do if my phone falls into the water?

What should I do if my phone falls into the water?

1.Quickly get your phone out of the water, unplug the battery, and remove the phone card and memory card.

Once the mobile phone enters the water, the first time must be that the battery connection is in contact with water, resulting in a power failure or short circuit, so that the mobile phone will be shut down directly, so we must unplug the battery immediately after taking the mobile phone out, so as not to cause a long-term short circuit and burn out the motherboard, which will be troublesome. Of course, the mobile phone card and memory card should also be taken out, for some non-removable battery mobile phones, then only the sim and memory card can be removed.

The first step of the mobile phone falling into the water: remove the battery and mobile phone card.

The first step of the mobile phone falling into the water: remove the battery and mobile phone card.

Note: The first thing many people take out of the mobile phone from the water is to see if it can be turned on, here we must pay attention to whether you must try to turn it on, maybe your mobile phone is still saved, once you turn it on, it must cause a short circuit in the mobile phone, there is a great chance of burning the motherboard, and the mobile phone is scrapped.

2.If it is a corrosive liquid, it is recommended to rinse it with water immediately.

Corrosive liquids will definitely corrode the mobile phone, of course, especially if there are too many small parts and circuit board chips inside the mobile phone, which are very easy to be corroded, and even if such a fine part is corroded in a small place, then the whole machine will be difficult to run, so it is necessary to rinse it quickly with clean water to dilute the corrosive liquid to ensure that these liquids cannot corrode your mobile phone.

3.Try to shake the water out.

Method: Shake the phone hard, but don't shake it around, the top of the phone is up, and shake it hard in one direction, this is to avoid throwing the water not only can't get out, but also the water in the phone is everywhere, which is not easy to get.

1. First of all, save your mobile phone from the water as soon as possible, wipe the surface water, remember not to shake the phone, don't think about shaking it, shake off the water, you must know that in fact, there is an air barrier in the small gap in the mobile phone, and it will not enter the water when it falls into the water at a simple time. If you shake it, it's good, it's all water, it's transparent. All, the first step, take it out, wipe it dry, and cannot shake it off.

2. Next, quickly turn on your phone, take out the battery, card, etc., and then wipe off the surface one by one. It is still necessary to remind you not to shake and blow, and it will be difficult to get water in the place where there is no water. After wiping dry, let it dry slightly.

Then it's time to prepare for the final step.

3. Take out the dried rice at home, put the battery, mobile phone and other key parts into the rice, and use the powerful water absorption function of the rice to save your mobile phone. After a day, you can take it out, it's basically dry, and there are no problems. Of course, depending on the degree of water ingress on your phone, if it is very wet, you can change some dry rice and repeat for a while.

One thing to note here is to prevent small, broken rice from entering the inside of the mobile phone, and it will be more troublesome at that time.

4. Many people will use a hair dryer to blow in this step, in fact, the hair dryer is not very good, and the risk is actually the same as the aforementioned throwing of the mobile phone and blowing, which is easy to lead to water in the place where there is no water. If you use hot air, it is easy to damage the screen of the mobile phone, which will seriously lead to deformation, and may not be able to display and the sequelae of water lines.

After scooping it out of the water, immediately wipe the surface of the phone dry with a dry paper towel, rag or even clothes, take out the SIM card slot, and use a paper towel to absorb water at each opening of the phone. Remember, don't press buttons such as the power button and volume button, don't turn on, don't turn on, don't turn on, this is the most important point, because once turned on, due to the water in the body, connecting the power again will cause the motherboard to burn out.

After the mobile phone falls into the water, it is best not to blow it with a hair dryer, because the hair dryer blowing is, it will cause the moisture inside the mobile phone to move, which may cause greater damage to the mobile phone, and if it is blown with hot air, it will have a certain impact on the mobile phone screen.

The best way is to go to the repair shop to disassemble and dry [smile] [compare heart] [compare heart].

If the phone is in the water, it must be taken out and turned off immediately. Then let the water get out as quickly as possible. You can find a hair dryer to blow your phone. In this case, the water will dry out quickly. Wait until it's completely dry before turning it on. That shouldn't be a problem.

The phone fell into the water, quickly fish it out, and then wipe it with dry hand tendons to see if the phone can still be used, if it can't be used, quickly dry it with a hair dryer.

Quickly pick it out of the water and see a professional.

The mobile phone fell into the water, how to deal with it?

1.Turn off your phone first

The first step after the mobile phone enters the water is to turn off the phone in time, you can't see it without turning it off and continue to use it, continuing to use it is easy to cause a short circuit, or even burn the phone, so we need to turn off the phone immediately.

2.Simple removal of moisture

After turning off your phone, use a clean towel or paper towel to wipe off the moisture on the surface of your phone. Then use the cold air mode of the hair dryer to blow on all parts of the mobile phone, you can dry the water on the surface and the places where the paper towel can't wipe it, remember not to use the hot air mode, even if you are blowing, you can't get too close to the mobile phone, it is easy to burn the mobile phone.

If the balance of mobile phones unfortunately "can't be saved", it is recommended that you buy one as soon as possible and reissue a mobile phone card (recommended) to avoid others not being able to contact you. Let's see if the recommended Huawei phone is right for you:

3.Further order the rolling drying treatment

After simply removing the water, the water entering the inside of the phone is not solved, at this time you can bury the phone in the desiccant, if there is no desiccant, use rice, so that the desiccant or rice can suck out the moisture inside the phone, so as to further make the phone drier.

The phone still can't be turned on after being dried, so it is recommended that you buy a mobile phone as soon as possible to use it, so as not to let others contact you:

4.Try powering it on

After it is fully dried, you can try to turn it on to see if it can be turned on normally. If it turns on normally, also check whether the phone screen, speakers, earpiece, and camera are working properly, and if so, it is fine. If it can't be turned on normally, or it can't be used normally after starting, you can only go to after-sales maintenance at this time.

At this time, time and efficiency are money. It is recommended that you have an extra mobile phone as a backup phone, in case the mobile phone is damaged by water or other problems, it can be used in time. It is recommended not to buy a backup machine that is too expensive, and you can make basic calls and surf the Internet.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, if the mobile phone is a removable battery, please remove the battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the water by throwing the phone, this operation may cause the liquid stall to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (the moisture inside the mobile phone may penetrate into other components of the screen after being heated into water vapor by the hair dryer and other hot machines, which will cause the mobile phone to be damp and damage the electronic components).

If you are consulting about the Honor mobile phone accidentally getting into water, please handle it in the following ways to avoid secondary damage:

Please try to place your phone in a dry and ventilated place and use a paper towel to absorb water stains on the surface of your phone.

If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

Please remove the SIM card.

Please bring your mobile phone to the HONOR authorized service center for testing and processing as soon as possible to avoid unnecessary losses. If the mobile phone can not be backed up, and the data has not been backed up before, there will be a risk of data loss, go to the service center to consult the staff to help you evaluate whether you can back up the data, open the Honor official website, click on the service support, find the service store query, you can query the nearby Honor authorized service center, it is recommended to go to the service center, bring the purchase voucher, contact the service center in advance, determine the business hours, and facilitate your travel

1 Power off as soon as possible.

2 Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate or dissipate slowly. This process takes more than six hours, and do not rush to use strong heat sources such as hair dryers.

After these three steps of processing, the power supply can basically work normally.

2. In the case of power failure, it falls into a non-corrosive liquid suspect. In this case, it can be basically determined that the machine is not damaged, but it may be that the LCD screen will be ugly

1 Shake dry vigorously, but don't shake the machine off

2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point

3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because the electronic circuit after this treatment can work normally

But the screen can be ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not

This situation is the most troublesome of the shirt chains. However, there is also a good chance that the machine will recover after proper treatment

1 Power off as soon as possible.

2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside

3 Disassemble the machine as soon as possible. But take your time when disassembling the machine

4 Clean with alcohol or professional washing water

5 Assemble. Or take the whole pile of your dismantled things to the repair point, and let the repair point clean and assemble them again for you