CCZ 1000 Direct Reading Dust Meter, Product Features?

Product Name: Direct Reading Dust Meter.

Product model: CCZ-1000

Coal safety sign number: MFA070094

Product introduction: This product is a new generation of portable direct-reading dust concentration tester, which has the characteristics of digital display, accurate measurement value, stable performance, small size, light weight, simple operation and easy use. It can be widely used in the working environment where there is a mixture of flammable, explosive and flammable gases to determine the concentration of total dust or respirable dust.

Main features and uses:

CCZ-1000 direct-reading dust meter (hereinafter referred to as dust meter) adopts microprocessor technology, fast data processing, strong anti-interference ability, good stability and high measurement accuracy. The dust meter is equipped with a graded dust trap, which can collect respirable dust and total dust, and its separation efficiency meets the requirements of the "BMRC" international standard curve for respirable dust separation efficiency. Full Chinese display, and can randomly record the first 50 historical test records.

The dust detector is suitable for coal mines or other dust operating environments, and can directly determine the concentration of total dust or respirable dust.

Working principle: After the filter clamp is placed into the dust meter, the detection system in the dust meter initializes the measurement of the blank filter membrane and stores the measured value. After 5 seconds, the dust meter starts sampling, and the negative pressure formed by the air pump will pump the dusty air into the filter membrane to accumulate dust on the filter membrane, and the timer synchronized with the sampling starts to time, and the detection system automatically sets the sampling time according to the amount of dust on the filter membrane.

When the dust meter stops sampling, the single-chip microcomputer processes the data and calculates the dust concentration, which is displayed on the display screen.

Main Specifications:

Project Technical Specifications.

Concentration measurement range (

Sample flow rate 2l min

Sampling flow error

Sample flow stability 5%.

The basic error is 20%.

Display mode: Hanxian LCD

Battery pack 2 ICP7S 7000mAh

Continuous working time 10h

Ex-proof version exibi

Dimensions 240 170 120

Weight 5 Ancillary equipment Tripod, charger.

CCZ1000 direct-reading dust tester is suitable for coal mines or other dust operating environments, ZMJT03 is used to determine the total dust or respirable dust concentration and can directly read the portable dust concentration tester, the instrument is based on the principle of ray absorption method, the separation efficiency of the impact respirable dust separation device meets the requirements of the "BMRC" international standard curve of respirable dust separation efficiency, the instrument has good stability, high measurement accuracy, 4000860537 measurement accuracy is not affected by the nature of dust, It is a reliable dust concentration measurement instrument that can be selected by industrial and mining enterprises and environmental protection departments. CCZ1000 direct-reading dust meter has on-site digital display, data storage and printing functions.

CCZ1000 direct-reading dust tester product introduction.

CCZ1000 direct-reading dust meter is an instrument used to determine the concentration of floating dust in ambient air by infrared light absorption method. The instrument can accurately and timely reflect the quality of respirable dust inhaled by dust personnel and the pollution status of dust in different dust workplaces, and provide reliable data for the accurate evaluation of the health status of the workplace. The instrument has the characteristics of compact structure, simple operation, large load and negative pressure capacity, automatic timing sampling, stable flow, full Chinese LCD display, and easy to carry.

CCZ1000 direct-reading dust meter product model.

Model: CCZ1000 direct-reading dust meter;

c-dust meter;

c——Dust measurement object: dust;

z - measuring principle: direct reading;

1000 - Main parameter: measuring range.

CCZ1000 direct-reading dust meter working conditions.

The gauge should work properly under the following environmental conditions:

a) Working temperature: 0 40;

b) Relative humidity: 95%(25);

c) Ambient atmospheric pressure: 80kpa 110kpa;

d) Suitable for underground coal mines with coal dust or gas hazards;

e) Gas environment without damaging metal insulation;

f) Medium coal sites without dripping;

g) Balance leakage storage temperature: -40 60.

CCZ1000 direct-reading dust meter related parameters.

Concentration measurement range: (, sampling flow: 2L min, basic error: 20%, display mode: Hanxian LCD;

Sample flow stability 5%.

Sampling flow error

Battery pack: 2 ICP7S 7000SH08mAh.

CCZ-1000 direct-reading dust detector is used in coal mines or other dust operating environments, measuring the concentration of total dust or respirable dust, and is a portable dust concentration tester that directly reads the number of disadvantages, based on the principle of ray absorption method, and the separation efficiency of the impact respirable powder positive and negative dust separation device conforms to the "BMRC" respirable dust separation efficiency standard.

The direct-reading dust meter is a portable direct-reading dust concentration tester, which is used to determine the concentration of total dust or respirable dust in the presence of flammable, explosive and flammable gas mixtures.

Working conditions of Shandong Zhongmei direct-reading dust detector.

The gauge should work properly under the following environmental conditions:

a) Operating temperature: 0 40 ;

b) Relative humidity: 95%(25);

c) Ambient atmospheric pressure: 80kpa 110kpa;

d) Suitable for underground coal mines with coal dust or gas hazards;

e) Gas environment without damaging metal insulation;

f) drip-free premises;

g) Storage temperature: -40 60.

It is used for dust prevention monitoring, health quarantine testing, environmental protection testing (pollution source investigation) in the labor department of industrial and mining enterprises, municipal smoke monitoring, scientific research, on-site factory environment, workshop dust concentration determination, exhaust outlet dust concentration monitoring, temporary dust removal and granulation process research total concentration detection, total dust, respirable dust, coal dust, etc. in coal mine underground operation sites, flour workshop environmental testing, pulverized coal production workshop, etc.

a) Operating temperature: 0 40 ;

b) Relative humidity: 95% atm;

c) Atmospheric pressure: 86kpa 110kpa;

d) Underground coal mines.