What is the correct way to disassemble the hot water dispenser? Can ordinary people disassemble it a

In our lives, there will inevitably be some small accidents, for example, the most common thing in daily life is that the water pipe is blocked, or the bathroom faucet can't stop the flow of water, which are small problems that we may encounter in our daily life. In fact, there will be problems with the various machines and equipment we use in our lives. Let's say our rice cooker lights go out, or our water dispenser is clogged.

These need to be faced and dealt with by us, so let's talk about how to disassemble and clean up the hot water dispenser in daily life. <>

Water dispenser in our home is a relatively common household appliance, because most people now live in the community, and there is a need for pure drinking water in the family, so many people choose to buy a water dispenser, and buying a water dispenser is also a long-term benefit, compared to buying bottled water in the supermarket. Then the correct disassembly should first unplug the plug of the hot water dispenser from the socket to prevent us from being electrocuted during the disassembly, the voltage of our household appliances is 220 volts, this voltage is a cake for our human body.

Ah, our human body can't bear it, if you accidentally get electrocuted, then an accident may occur. Then use a screwdriver.

Open all the screws on the back cover of the water dispenser, open the back cover and take it off. Then you can see the structure inside, we find the two lines that control the switch, and take down the two lines, and then remove the bucket to open the drain valve of the water dispenser Jiangyin City's basic water drainage, so that the general equipment of the water dispenser is all removed. <>

But I still recommend that we go to life, if there is a problem on the basis, try not to check it ourselves, and turn on the water dispenser casually. There are certain safety risks in this kind of work.

Yes, because we are not sure whether there are other power supply equipment in this instrument, or particularly sharp places, we can't pay attention to it, resulting in our injury, so if we encounter a situation, we still need to find a special staff for inspection, we do not disassemble at will. <>

First power off the water dispenser, there are screws on the back of the water dispenser, remove these screws with a screwdriver, so that the water dispenser is turned on. We ordinary people can't disassemble it at will, because it has a lot of parts in it, and it must be disassembled by professionals.

First of all, you should unplug the power supply, then dry the water control in the water dispenser, and then remove all the screws on the surface, and then slowly disassemble it.

I don't know exactly what the correct disassembly method is, because I don't usually pay much attention to this aspect. Ordinary people can't disassemble it at will, because there are a lot of things in it, and if you remove the stitches at will, you won't be able to install it.

The correct way to disassemble is to first turn off the power supply, then use a screwdriver to remove the external iron sheet, remove the motor, and cut off the wires.

Instant hot water dispenser is one of the indispensable household appliances in modern homes, and its installation and use are also very simple, but if you need to clean or maintain the instant hot water dispenser, then you also need to disassemble it.

1. Disassemble the water tank.

1. Disassemble the shell of the relay and remove the three crimping equipment (oblique washers).

2. Disassemble the large board, disassemble the water tank, purple kettle, electric heating pipe, and clip without positioning nails, and be careful not to remove the gasket ballast at the upper and lower ends, and remove the water tank.

3. Remove the end shell and heat insulation pad.

4. Remove the electric heating pipe and the silicone strip that is sleeved on top of the electric heating pipe with a plastic strip, then remove the spring that supports the electric heating pipe, and finally remove the electric heating pipe.

2. Disassemble the bottom of the machine.

1. Remove the punch reduction sprammer tube first, and then flip the machine over with its bottom face up.

2. Unscrew the screw of the bottom cover of the machine and remove the bottom of the machine.

3. Disassemble the display panel.

1. Lay the machine flat, then unscrew the screws of the display panel and remove the display panel.

2. Remove the electrical contacts.

In order to ensure the safety of use, the power supply must be disconnected before disassembly, and the disassembly process must be slow and careful, so as not to damage the internal parts or circuits of the machine.

Water dispenser is one of the indispensable electrical appliances in modern life, which can filter and purify the tap water that enters the home and then provide people with drinking. However, some problems may occur after long-term use, such as water leakage, abnormal water temperature, and many more. If these problems arise, we need to disassemble and repair the water dispenser.

The following is an introduction to the steps and precautions for disassembling and repairing the water dispenser.

Step 1: Power off and remove the water tank from the water dispenser.

Before disassembling the water dispenser for repair, be sure to power it off and remove the water tank. When removing the tank, it is important to note that there is often a small hole at the bottom of the tank that reverses the tank to pour out the residual water. After removing the water tank, disassemble and clean the water pipes connected to the two ends of the water tank and the fuselage.

Step 2: Open the fuselage shell.

Before disassembling the fuselage shell, you need to find the screws on the casing and undo it according to the model and brand. When unscrewing, it is best to choose a shadowless lamp flashlight in order to illuminate the work area. After removing the case, you can see that there are some electronic components and wiring inside, you need to be careful not to touch them.

Step 3: Repair the damaged parts.

During the disassembly process, it is necessary to pay attention to common faults, such as the pump not working, the failure of the refrigeration system, the abnormal amount of water flow, etc. If this is the type of fault, it needs to be repaired on a case-by-case basis. If the refrigeration system fails, it may be a refrigerant leak, the compressor is broken, etc., and the corresponding parts need to be replaced.

If the pump is not working, it may be that the shaft seal is worn or the motor winding is burned out, and it needs to be repaired accordingly.

Step 4: Organize the components and wiring.

After the repair is completed, the components and wiring need to be sorted out to ensure that the wiring is not short-circuited or reversed, and to ensure that all parts are properly fixed. When assembling the fuselage shell, you need to make sure that all the screws have been screwed and tightly fastened.

It should be noted that the disassembly and repair of the water dispenser requires certain maintenance experience and skills, and if you are not sure about your ability, it is best not to disassemble and repair it to avoid greater losses. Of course, if you don't have repair experience or are willing to take the corresponding risks, it is best to find a professional repair person to repair it.