What happens to water dispenser leakage and how to solve it

Updated on home 2024-08-01
3 answers
  1. Anonymous users2024-02-15

    Reason 1: The reason for the water dispenser leakage may be the leakage of the drinking bottle.

    Solution: First of all, wrap the water bottle with a towel, if there is a leak in the level, the towel will be wet, then we can prove that the reason for the water dispenser leakage appears on the drinking bottle, or replace it with a new drinking bottle, observe that the water dispenser does not leak again, and the water dispenser will no longer leak after replacing the drinking bottle, and it can also be explained that the reason for the water dispenser leakage is that the drinking bottle is broken. This is where the drinking bottle should be replaced.

    Reason 2: Sometimes we don't turn off the faucet properly after connecting the water, which will also cause the water dispenser to leak.

    Solution: Re-screw the water dispenser faucet to ensure that the faucet is no longer leaking.

    Reason 3: The one-way valve of the water dispenser will also leak due to aging or the hoses at both ends will fall off.

    Solution: Use a nylon tie to tighten the check valve or replace it with a new check valve to solve the problem of water dispenser leakage.

    Reason 4: The leakage of the smart seat of the water dispenser is generally due to the overflow of water due to the rupture of the water bottle.

    Solution: Replace the water bottle with a new one, and replace the float with a new one if the float in the water bucket fails and cannot be sealed.

    Reason 5: When the water dispenser leaks, it is because the internal components of the water dispenser leakage, such as the leakage of the weld of the cold tank, the leakage of electronic ice gall, the rupture of the water bottle, etc., will lead to the leakage of the water dispenser.

    Solution: Check the internal components of the water dispenser, check which part of the water leakage is specific, and solve the problem of water leakage of the water dispenser by replacing the corresponding parts.

    Precautions for cleaning and maintenance of water dispensers

    Before cleaning the water dispenser, be sure to turn off the power first, then remove the bucket on the water dispenser, and open the sewage outlet at the back of the water dispenser at the same time to drain the remaining water in the water dispenser. When cleaning the water dispenser, you need to remove the part of the water dispenser that comes into contact with the mineral water, and wipe the lid of the water dispenser and the inner tank with an alcohol swab.

    There are two ways to clean the inner tank of a water dispenser. One is to connect the power supply of the water dispenser, turn on its heating switch at the same time, and put food-grade citric acid into the heating liner at the same time, and heat it repeatedly.

    The second method is to configure the disinfectant water according to the instructions in the disinfectant, and then pour the configured disinfectant water into the water dispenser, then the disinfectant water will fill the inside of the entire water dispenser, let it stand for about 10 years, and when the time is up, turn on the switch in the water dispenser and discharge the disinfectant water in the water dispenser.

    The above content reference: Encyclopedia - Water Dispenser.

  2. Anonymous users2024-02-14

    Summary. Reason 1: The reason for the water dispenser leakage may be the leakage of the drinking bottle.

    Solution: First of all, wrap the water bottle with a towel, if there is a leak in the level, the towel will be wet, then we can prove that the reason for the water dispenser leakage appears on the drinking bottle, or replace it with a new drinking bottle, observe that the water dispenser does not leak again, and the water dispenser will no longer leak after replacing the drinking bottle, and it can also be explained that the reason for the water dispenser leakage is that the drinking bottle is broken. This is where the drinking bottle should be replaced.

    Original cause 1: The reason for the leakage of the water dispenser may be the leakage of the drinking bottle. Workaround:

    First of all, wrap the water bottle with a towel, if there is a leak in the level, the towel will be wet, then we can prove that the reason for the water dispenser leakage appears on the drinking bottle, or replace it with a new drinking bottle, observe that the drinking water will not leak again, and the water dispenser will no longer leak after replacing the drinking bottle, which can also indicate that the reason for the water dispenser leakage is that the drinking bottle is broken. This is where the drinking bottle should be replaced.

    Reason 2: Sometimes we don't turn off the faucet properly after receiving the water, which will also cause the water dispenser to leak. Solution: Re-screw the water dispenser faucet to ensure that the faucet does not leak again. Shelter.

    Reason 3: The one-way valve of the water dispenser will also cause the water dispenser to leak and tremble due to aging or the destruction and falling off of the hose at both ends. Solution: Use a nylon tie to tie the check valve hole beam tightly or replace it with a new check valve to solve the problem of water dispenser leakage.

    Reason 4: The water leakage of the water dispenser's smart and clever shengming seat is generally due to the overflow of water due to the rupture of the water bottle. Solution: Replace the water bottle with a new one, and replace the float with a new one if the float in the water bucket fails and cannot be sealed.

    Reason 5: When the water dispenser leaks, it is due to the leakage of the internal components of the water dispenser due to the lack of closed code, such as the leakage of the weld of the cold tank, the leakage of the electronic ice gall, the rupture of the water bottle, etc., which will lead to the leakage of the water dispenser. Workaround:

    Check the internal components of the water dispenser, see which part of the water leakage, and solve the problem of water leakage of the water dispenser by replacing the corresponding parts.

    The seam of the seat plate on the water dispenser is leaking.

    The water dispenser leaked and overflowed from above.

    Dear, is it convenient for you to take a picture**.

    Hello, 1. The water pipe of the water dispenser itself is broken, the water storage tank is perforated, and the water pipe connection is detached, etc., which will cause water leakage, but the water leakage of the water dispenser seat plate itself is relatively small, and the probability is less than 10%; Method: Replace the water dispenser pipe. 2. Water leakage caused by the rupture of the seated plate

    Leakage of water dispenser tray caused by micro-cracks, small trachoma, etc. Method: Buy a new seat to replace the spring.

    In short, the reason for the leakage resistance of the side roll water dispenser seat plate Kaiqi is not only the cracking of the seat plate itself, but also the aging of the silicone tube of the water dispenser itself. There are many reasons for this, of course, when we use the water dispenser, we need to understand some components, so as not to better know the problem in the event of a water leak.

  3. Anonymous users2024-02-13

    Causes: The faucet is leaking, there is air in the bucket, and the inner tank of the water dispenser is damaged.

    Solution: When we use the water dispenser, I believe that some friends will find that the faucet of the water dispenser sometimes drips.

    Solution: If you find a water leak, you should first look at whether the faucet is leaking, if so, you need to check whether it is a long time to use hot water to burn the junction, etc., if not, then replace it with a new faucet.

    2.If you find that there is no leakage, but the water in the bucket is completely gone, in this case, there is air in the bucket.

    Solution: You need to check it, first of all, you need to see if there is air in the bucket, and then square the bucket to the ground If there is no leakage, then it is very likely that the gap in the bucket is too small to let the water flow out, put the water on the water dispenser, the air enters the bucket, and then according to the pressure of the air, the water will of course leak out.

    3.Leaking air in the bucket.

    Solution: Then you should pump out the air in the bucket, or replace it with a new bucket of water to use, if there is still leakage, you need to disassemble the place where the water is flowing to see if there is any blockage in the place of the water to cause water leakage.

    4.When we use the water dispenser, there is also a possibility that the water leaks when the water is heated, and there is no problem when the heating water is not used.

    Solution: In this case, it is a problem with the water dispenser, it is very likely that the heater in the tank that heats the water is broken and needs to be replaced with a new one, or there is something wrong with the thermostat and the thermostat needs to be replaced.

    5.If it is because the water dispenser is broken, of course, it will need professional maintenance personnel to repair, if you have no maintenance experience, it is best not to disassemble it yourself to prevent other circuits from being damaged. If the cost of maintenance is more expensive and the water dispenser is cheaper, it is recommended that the best way is to directly replace it with a new water dispenser.

Related questions
13 answers2024-08-01

1. The faucet is broken.

If it is caused by a loose faucet, you can tighten it directly, and if it is caused by blockage, just disassemble and clean it. But if it is damaged, the faucet must be replaced. >>>More

11 answers2024-08-01

It should be that the faucet at the hot outlet is broken, and the faucet is often aging when putting hot water. You can go to the water dispenser store and buy a different one of the same model. >>>More

7 answers2024-08-01

Disassembly:

Unplug the power first, turn on the two switches of the water dispenser, and drain the remaining water in the bucket. >>>More

4 answers2024-08-01

Unplug the power supply, remove the bucket, turn on the drinking switch, and drain the remaining water in the cavity of the water dispenser. Expert Comment: The first step in disinfection of the water dispenser is to release all the remaining water in the cavity of the water dispenser. >>>More

8 answers2024-08-01

Hello! This is caused by the cold of the wall, which is commonly known, but it is actually the reason why the wall insulation is not done well. You say whether the hairy wall is an exterior wall or a wall that is related to the outside world. If yes, that's basically the reason. >>>More