Minesweeping skills high finger point to detail points, advanced minesweeping skills

Updated on Game 2024-08-13
8 answers
  1. Anonymous users2024-02-16

    Move the mouse over any square, type"Method 1:

    1..Open the game of Minesweeper;

    2.To start the game, press the start button + D (the start button is the one between CTRL and Alt on the left);

    4.At this point, you'll notice that the game window is minimized in the taskbar at the bottom of the screen;

    5.Select Minesweeper in the taskbar and make it the current working window of its original size;

    6.You'll see the timer stop, and you'll be able to do it in two or three seconds!

    Method 2: Click the mouse on any minefield. After that, press the "xyzzy" keys in turn; xyzzy", black means there is thunder under the block.

    Method 3: Turn on Minesweeper, a dot will appear at the edge of the upper left corner of the screen, white means there is no thunder, black means there is thunder under this square, so that the clock starts to time, and then press the "shift" key. Move your mouse over any square and a dot will appear at the edge of the top left corner of the screen, then press"RightShift+Enter", white means that there is no thunder, click on a piece;

    3.Any moment before the game ends without a point hit mine.

  2. Anonymous users2024-02-15

    If you want to take someone else's words and a few words, you can take the technology to the point of 60 seconds, that's impossible. Minesweeper is a game that requires skill, but the dexterity of the hands and the reaction speed of the brain are the most important. Well, I'll give you a few tips here, I hope it will help you.

    For example, in the combination of 121, the two 1s are thunder on top; A combination of 1221, two 2s above is Ray. In fact, most of the skills of minesweeping are based on these two, and then there are more usually more plays.

  3. Anonymous users2024-02-14

    I can't play minesweeper, the teacher teaches you the rules of minesweeping.

  4. Anonymous users2024-02-13

    The advanced Minesweeper tips are as follows:

    1.Left-click: Opens the tlaid you clicked. If the grid is empty or the number is safe, the game continues; If there is a mine in the grid, the game is over.

    2.Right-click: Mark the tether as a mine with a small red flag, and click again to unmark it. (In some versions, right-clicking a small red flag will show a question mark mark, so right-click the question mark again to cancel the mark).

    3.Left and right button double click: Pressing the left and right buttons at the same time is a double click. Double-clicking has no effect on unopened grids. When a number is double-clicked, it opens if the number of marked mines in a 3x3 radius around the number is equal to that number.

  5. Anonymous users2024-02-12

    The rules of the game are very simple, click on the squares, if it is a mine, the game loses, find all the mines to win the game.

    Tips:

    1. Double-click on the single thunder: hold down the right button on the grid with thunder and do not let go, move to the number 1 and press the left button, and then release the right button (i.e.

    2. Listening to the fast-paced ** helps to concentrate and can also mask the sound of the mouse.

    3. Reduce the resolution of the screen and reduce the sensitivity of the mouse at the same time, which helps to improve operability.

    Note:

    1. Practice makes perfect a game, novices can start with the beginner and start step by step.

    2. Don't be obsessed with one grid, you can try to find it from somewhere else.

    3. Don't guess whether there is thunder under the grid, each grid is connected with each grid.

    4. Minesweeper bug: Open the minesweeper interface, enter xyzzy, press the shift key in the lower right corner, at this time, the mouse is placed in the minefield, and you will see a small light dot flashing in the upper left corner of the screen.

  6. Anonymous users2024-02-11

    When the minesweeper rules, first of all, just point a small man on it, and a small piece will appear, and the number displayed on it represents how many mines are in the eight grids around, and it is judged that the thunder can be planted in the flag, and all the mines are found to be victorious. The trick is that two 2 clips and one 1, there must be thunder in the middle, two 2 clips n 3, and all 3 have thunder.

    How to sweep mines

    Minesweeper is a very classic stand-alone game on the computer, its basic rule is to click a small grid at random, there will be a small block, the number displayed on it means that there will be several mines in the surrounding eight grids, for example, 1 is only 1 thunder around, the right click can be a flag for this grid, and the left click can turn the grid open.

    Techniques for minesweeping

    Fill in all the parts that are not thunder, then the remaining grid must be thunder, right-click to mark the flag. Some of the basic skills of minesweeping have just learned, two 2 clips and one 1, and there must be a mine under the center of the 1, which is directly marked.

    Two 2 clamps n (n>1) 3, 3 all have thunder at the bottom, the center number is 1, which means that there must be a thunder in the 8 squares around 1, that is, there is thunder diagonally. Three consecutive 1s, the middle 1 has thunder, these are some basic judgment methods, after mastering the need to extend the judgment according to different situations.

  7. Anonymous users2024-02-10

    The minesweeper mantra is as follows:

    1. As soon as you see this single 1 connected block, it must be a thunderbolt.

    2. Since a thunder has been determined, the blocks connected to the surrounding 1 must not be thunder and can be opened.

    3. Look at the skills of 3, the 3 below are only connected with two unopened blocks, so these three must be thunder.

    4. This kind of three 1s are connected, and only one of the bottom ones must be thunder, and the square indicated by the arrow above is definitely not thunder.

    5. The skill of the number 2, this 2 is only connected to two squares, then these two must be thunder.

    If all the mines in the vicinity of a tile have been marked, pressing the left and right keys at the same time will automatically sweep away the remaining tiles around it, saving you from pressing them one by one.

    In the grid lined up, two 1 clips and one virtual 2, 1 bottom difference Qi socks must have thunder; Two 2 clamps and one 1, 1 must have thunder under it; Two 2 clamp n 3, all 2 and 3 have thunder underneath; Two 2s are on the side, and there are mines under 2; Three 1s in a row, and the middle 1 has thunder; Four consecutive 1s on both sides of the 1 have thunder.

    The 2 and 1 here are not only the squares of can be applied, sometimes for example, 3 or 4, but there is already a mine nearby, and the remaining 1 or 2 are not yet certain, of course, you can also use this principle.

  8. Anonymous users2024-02-09

    The basic operations include left-click, right-click, and double-click.

    Left-click: Left-click on a block that you have determined is not thunder to open the block. If a number appears on a block, the number indicates the number of mines in the area around it 3 3; If the block is empty (equivalent to 0), the block adjacent to the empty can be recursively opened; If you are unfortunate enough to strike a mine, the game is over.

    Right-click: Right-click on a block judged to be a mine to mark the mine (displayed as a small red flag). Repeat the operation one or two times to unmark (if the "Marker" (?) is checked in the game menu. It will take two operations to cancel the mine).

    In minesweeping, 1 means that there will be a total of one mine at the up, down, left, right and bevel angles of 1, and if we make so on, 2 means that there are 2 mines, and 3 has 3 mines. If you light a flag on the square of the bomb, you are safe, but if you are flagged in a place that is not a bomb, it means that you will be killed later.

    That is, if a bomb is found, the left and right keys can be used to determine whether all the surrounding mines are marked, and the number represents how many mines there are in the surrounding nine grids. Under normal circumstances, if there is only one grid left around a thunder, then this must be a thunder, just click the mouse to mark the flag.

    For the situation of encountering several numbers together, you need to find the parts that overlap the range, because the probability of these parts of the mine will be higher, and you can try to point a little bit elsewhere.

Related questions
45 answers2024-08-13

Well,My friend is a 1 anti master.,He said,His anti-one is practiced in actual combat.。。 I opened a room and called the martial artist to enter. >>>More

11 answers2024-08-13

Looking back at Wang Ju's performance, you will find more points, than to say, she is strong and brave, and in the face of bad comments from the outside world, although she is confused, she always insists; For example, she is self-black, cute, and has a contemplative and unpretentious funny character. She has her own aura, although her appearance is not amazing, but she has a "mother is born strong". >>>More

5 answers2024-08-13

You start by using the IE Repair tool.

And then you have a multi-window browser, and you can just search for it, and there are a lot of them, and I use "maxthon" right now"Personally, I think it's still easy to use, and even the ** ads can be blocked to prevent him from appearing on your computer. >>>More

26 answers2024-08-13

I'm also from the Astaro server in District 10 I'm also a little d Hehe No nonsense, I'll just talk about my feelings. >>>More

16 answers2024-08-13

Find a chance to talk to him and pay attention to whether he will say some wrong words, words! >>>More