CX5 can the original oil and filter bought by yourself be guaranteed in an outside store?

Hello, about the maintenance of the car The car is within the warranty period, it is recommended that you go directly to the four S shop for replacement, which is guaranteed for your later maintenance.

It is recommended to go to the 4S shop for maintenance, if there is a problem in the later stage, so as not to cause out of warranty, the 4S shop will not give maintenance.

Hello, this situation is completely no problem, you can replace it directly at your local repair shop.

If it is the original accessories purchased by yourself, then you can use it outside for maintenance, that is, give a handling fee.

Personally, I think that during the warranty period, don't go out to maintain it, if there is a problem, it is easy to rip off, and you can maintain it outside after the warranty period.

Since this is the purchase of original engine oil and machine filter, why not maintain it in the 4S shop, and it is more convenient to claim accessories in the future.

Hello, it's not that you can't do maintenance outside, if you do maintenance outside, it is equivalent to giving up the warranty, there is a problem, 4S shop doesn't care.

If the vehicle is still within the warranty period, it is recommended to go to the 4S shop for maintenance, otherwise it may lead to the vehicle being out of warranty.

Hello, of course, but the car within the warranty is recommended to be maintained in the SSSS shop, although it is a little more expensive, but there is a warranty, once the warranty is out, the SSSS shop does not give a warranty!

If you seem to have regular maintenance of this vehicle, I personally recommend that you go to a 4S shop and use the engine oil specified by the manufacturer.

The oil should be selected according to the requirements of the "Maintenance Manual".

Domestic or imported brand oils are good choices.

Hello. This car is a second guarantee. It is generally carried out for about 8,000 kilometers. The words of this second guarantee. It is to change the oil of the car. Machine filter. Air cleaner.

The model of the oil filter is different for each car, although some of the oil grids look the same on the surface, in fact, there are still differences, such as the size of the inner diameter, the height of the screw mouth, etc., the position of the oil grid is generally in the lower position on the side of the engine.

Hello. Generally, just use Castrol magnetic protection or blue shell! 8000 km maintenance once!

If you don't understand, you can ask, I wish you a happy life! The car master walks with you! [If you have a problem with the car, ask the car master.]

4S shop professional technician, 10 minutes to solve. 】

Hello, the best and most cost-effective is, of course, Mazda's special engine oil SN fully synthetic engine oil [If you have a question about the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello! Just under the rear seats, enjoy your ride! If my reply can help you, please help choose it, thank you very much!

Look at the on-board manual, the engine position of different models of different manufacturers may be different, and it is generally more likely to be on both sides of the fuselage.

The most important thing to look at is the ambient temperature of the area where the vehicle is used and the type of engine oil recommended in the vehicle maintenance manual.

If the minimum temperature in the area where the vehicle is used is higher than minus 30 degrees Celsius, it can be used.

5w-30, "w" stands for "winter" which means used in winter, and the 5 in front of "w" represents the viscosity at low temperatures, the smaller the number, the stronger the fluidity at low temperatures, and the stronger the ability to withstand cold. "30" refers to the viscosity at 100, and the higher the number, the higher the viscosity and the stronger the ability to withstand high temperatures.

SAE is the English abbreviation of the Society of Automotive Engineers of America, and the SAE grade represents the viscosity grade of the oil. SAE30 and SAE40 are single-grade oils, and SAE10W 30 and SAE15W 40 are multi-grade oils. Among them,"w"The higher the previous number, the lower the viscosity at low temperatures, the better the protection ability of the engine during cold start; "w"The following figures are an indicator of the oil's resistance to high temperatures.

Therefore, the difference between W-30 and 10W-40 is: the more fluid the oil is at low temperatures, and the ability to withstand cold is different. Viscosity at 100, the higher the number represents the higher the viscosity and the ability to withstand high temperatures.

CX-5 uses the SKYACTIV engine, which has higher requirements for lubricating oil, similar to Subaru's horizontally opposed engine, which requires the use of lubricating oil with low flow resistance, and the original factory recommends 0W-20 engine oil. The 5W-30 engine oil is suitable for Mazda's previous generation MZR and Z6V engines, but the flow resistance is a bit high when used in the Skyactiv engine, which will have a certain impact on fuel consumption, and of course the high temperature resistance will be better.

CX5 can use 5W30 fully synthetic lubricating oil, now fully synthetic 30 oil, due to the base oil, the high temperature oil film strength performance is not inferior to 40 oil, Japanese vehicle piston and cylinder wall clearance can match 30 oil no problem, hope.

1. First click the one-button start button of the vehicle to power on the vehicle.

2. After that, click the SET button on the left multi-function steering wheel.

3. After that, click the CANCL button on the left multi-function steering wheel, so that the oil lamp will be reset.

4. After observing the vehicle dashboard, you can see that the oil lamp has been reset.

Oil lamp reset method.

Pull out the key and press and hold a button like a wrench on the lower right foot of the instrument, insert the key to the instrument light to light up, it also displays "immediate maintenance", and then press and hold the min button at the bottom left of the meter and release it. You can also use the computer to enter the dashboard, enter 10, match and then enter 02, select the value to zero, and save it.

The key is turned off, and at the same time press and hold the wrench and the clear (right) button to open the key, and then press and hold the min of the meter (lower left) on it. As long as it is shown;

First of all, press and hold the maintenance button (that is, the wrench next to the dashboard, Sutar and A6L are to press and hold the small mileage zero button), insert the key to the light on, let go of the maintenance button after hearing the ding, the key does not move it, press and hold the minute button (min) next to the meter, as long as the minute meter does not move.

1. Check whether there is any problem with the oil induction plug and circuit.

2. Measure the oil pressure directly with the oil pressure gauge to see if the oil pressure is qualified. It is used to determine whether there is a problem with the gap between the oil pump and the bearing, and it can also be used to check whether the oil suction filter of the oil pump is blocked.

3. Finally, consider that there is a problem with the use of engine oil itself (the possibility is very small, the probability is extremely small).