How to make a big bow out of cloth, how to make a bow out of cloth

The steps to make a big bow with cloth are as follows:1. Prepare the required materials and tools.

2. First cut out a rectangular rag with scissors, and then fold it vertically and sew it with a needle and thread.

4. Then put the stitched rags, fold the middle with your fingers, and sew them with needles and threads.

5. Use scissors to cut out a small long rag, and then sew it in the middle of the bow, and the beautiful and delicate bow is completed.

The following is a tutorial on making a big bow out of fabric, and you will soon be able to make a beautiful headpiece.

1. Cut a long piece of cloth as the main part of the headdress. The length and width are about twice the length and width of the bow you want to make. A 20-inch wide cloth is just fine, but you don't need to measure it exactly, it's about the same.

2. Fold the fabric in half along the long side to form a rectangle, so that the side with the pattern is facing inward. Then fix it.

3. Sew the fabric along the long side of the rectangle to form a tube.

4. Sew up the top of the rectangle, and then turn out the patterned side (the inside of the tubular fabric).

5. Fold the rectangle in half along the short side, and then sew the two short sides together.

6. Tidy up the fabric and adjust the seams to the middle of the back. This ensures that the seam will not be exposed after you finish the work.

7. Pinch the middle of the rectangle and adjust it to the way you want it to look.

8. Cut a small rectangle of fabric, then wrap it around the large rectangle and pinch it according to your liking, and then fix it.

9. Cut off the excess part of the small rectangle and sew the two ends of it together, leaving a gap between the small rectangle and the large rectangle to insert the hairpin or hair band.

The steps to make a bow with cloth are changed

1. Prepare materials, tools, raw materials, fabrics, ribbons, wires, needles and threads, scissors, double-sided tape, and hairpins.

2. Then cut the fabric into 7 times 14 cm, 7 times 10 cm, and 2 times 6 cm.

3. Glue double-sided tape in the middle of the 7 times 14 cm lattice fabric.

4. After folding and gluing in half, stick double-sided tape vertically in the middle of the cloth.

5. Fold it in half and then stick it firmly. Collapsed hall.

6. The fabric of 7 times 10 cm is also made in the same way.

7. Tie a bow with wire, or sew it up with a needle and thread. Place the small bow on the large bow and sew it firmly with a needle and thread.

8. Glue double-sided tape on the fabric of 2 times 6 cm, and then fold it in half and glue it firmly.

9. Wrap the small cloth strip you just made on the outside of the wire and fix it.

10. Finally, use 502 glue to fix the hairpin behind the butterfly knot of the butterfly shirt, and the production is completed.

Materials: fabric, lace, ribbon, decorative buttons, decorative hole punches, glue, needle and thread.

How to make the Korean version of the bow cloth:

1. Cut out the lace of the fabric first, and then punch the holes.

2. Fold it a few times in the way shown in the figure, and tie it up in the middle.

3. Tie the orange ribbon into a bow and add buttons to decorate.

4. If you want to make a lace element bow, fold the lace into it when folding the fabric, and the following method will be the same.

How to make a double fabric bow DIY bow hair accessories tutorial.

Materials and tools: two shades of cloth, glue, rubber rope, scissors, needle and thread.

Whether on clothes, bags, shoes and other accessories, the bow element occupies a very important role. The materials used are very diverse, such as paper round sheets, cloth decorations, and ribbons. We are learning a bow making tutorial today, and the fabric bow making method we learned earlier is different, this is a double bow, so that it looks thicker, more three-dimensional, used as a decoration for bags and clothes, or used to make a beautiful bow headwear, are good choices.

Bows are a beautiful decoration that can be used on items such as gift wrapping, clothes, shoes, hair accessories, etc., to increase their aesthetics. Here are a few ways to make a bow.

1. Basic bow.

Fold a ribbon of the bow in half, align the ends and tie a knot.

Fold the strip on the left to the right, then press and hold the middle of it with your finger to flip it up.

Fold the right strap to the left, then thread it through the left strap and down from above.

Grasp the middle of the two straps and pull them tight so that the bow becomes a circle.

Tie a knot at the end of the two straps to complete the bow.

Second, double bows.

Start by making a basic bow.

Tie a basic bow on top of the basic bow, which is smaller than the one below.

Tie the ends of two bows in a knot to complete a double bow.

3. Strawberry bow.

Start by making a basic bow.

Separate the two straps of the bow, tie a knot in the middle, tighten the knot and pat it flat.

Tie a knot at the end of both straps to complete the strawberry bow.

Fourth, three-layer bows.

Start by making a basic bow.

Tie a basic bow on top of the basic bow, which is smaller than the one below.

Separate the two straps of the top bow, tie a knot in the middle, tighten the knot and pat it flat.

Then tie a small bow on the top, which is smaller than the bottom one.

Tie a knot at the end of the three bows to complete a three-layer bow.

The above are several common ways to make bows, and you can choose the bow style that suits you according to your needs and preferences. The key to making a bow is to tighten the strap so that the bow looks neat and beautiful.

Here's how to make a bow:

Prepare materials for burial: thick ribbons, thin ribbons, scissors, QQ wires, glue guns with hot melt adhesives, candles or lighters.

1. Start by cutting a rectangular ribbon.

2. Bake the left and right edges over a fire.

3. Bend over and hold down on the middle part.

4. Fold the middle part in four and pinch it.

5. Wrap it with QQ wire.

6. Take out the thin ribbon and wrap it around the middle part.

7. After winding, apply hot melt adhesive and stick the fine ribbon.

8. Cut off the excess part of the thin ribbon, and the bow is ready.

The bow is shaped like a bow knot, the production material is not the same, the shape and size are different, but the appearance is beautiful and generous, there are many ways to play the difference, which embodies the ancient cultural beliefs and strong religious colors of our country, and embodies the desire of people to pursue truth, goodness and beauty.

Historical Origins:

The verses about knots in the Book of Songs are: Kiss the knot and ninety its rituals. This is a description of the scene when the daughter got married, the mother tied the knot with her while telling many etiquette, and this wedding ceremony made "knotting" a synonym for marriage in ancient times.

During the Warring States Period, Qu Yuan wrote in "The Nine Chapters of Chu Ci Lamentation": The heart is knotted but not dissolved, and the thoughts are born but not released.

The author uses the poem "Gui but not understand" to express his worries and concerns about the fate of the motherland. There are also ancient Chinese poems: Sauvignon Blanc, fate is incomprehensible.

In the glue paint, who can part with this. Among them, the combination of "knots and glue paint" to describe the depth of feelings can be described as just right. Liu Ling of the Jin Dynasty wrote in "The Grass by the Qingqing River":

Mengjun knotted the same heart and traveled to the north forest with wings.

The bow preparation is as follows:

The first step is to cut four ribbons, three of which are about 16cm in length, and the other is about 30cm, and all ribbons are wide.

The second step is to make three sections of 16cm ribbons into small bows, the production of bows here is the most conventional kind, you can paste double-sided tape in the middle of the ribbon, fold the ribbon at both ends to the middle, connect it together at the double-sided tape, and then pinch the bow to fix the shape, a total of three small bows.

The third step is to glue the three bows with hot melt adhesive side by side, and then tie them with thread a few times after gluing them to ensure that they are fixed and strong.

The fourth friend pretended to be a step and folded the 30cm ribbon according to the picture below, the ribbon was also folded from both ends to the middle, and the two ends of the folded ribbon were crossed. The shape of this folded ribbon is the ribbon bow, after folding the ribbon, use a needle and thread to sew a few stitches from the middle of the ribbon bow, and the shape of the ribbon bow will come out after the thread is tightened.

The fifth step is to glue the ribbon bow to the bow that was made before. Such a double-layer bow is basically done, and then cut a ribbon with a length of about 6cm to make a kink, and wrap it around the bow after it is done. Trim the ribbon part of the lower bow and cut it to your liking.

Such a beautiful bow is done.