How to connect the static IP given by the company to the wireless router to achieve wireless Interne

If you want to save trouble, just buy a portable wifi, or 360 portable you can get it twice and solve it.

Upstairs is right, your router is newly bought, and the default address is: Same as the company, so there will be conflicts,。。 You connect the company's network cable to the WAN port, your own computer to the LAN port, select the static address in the router's management interface, WAN port settings, and then set the IP given by the company to it, and write the address of the LAN port in the LAN port settings as:, it should be OK, DHCP will automatically change back, you try again,

You set the IP of your router's LAN port to the third number, which cannot be the same as the company's. Just select static as the WAN port connection type!

Change the IP of the LAN port of the wireless router, for example, to the line. The IP address of your machine is still automatically obtained. This is the easiest way to do it.

It's just that it becomes two network segments. Some intranet access cannot be realized. However, there is no problem with getting on the WAN.

There is also a more professional one that cannot be provided to you.

In the router, select the static IP of the WAN port and set the IP given by the company to it, and change the IP address of the LAN port of the router, such as changing the IP address segment to be assigned by the DHCP server to the gateway.

1. First open the browser on the computer and log in to the router settings page on the browser.

2. Click Enter to enter the management interface of the router, enter the login password, and you can enter the settings page of the router.

4. Then click on the Internet connection wizard, click "Next", check "Static IP" in the pop-up window, and click "Next".

I feel a little weird about this question.

Now that the organization has already assigned an IP, why do you need to connect to a route?

Isn't the route in the unit?

If it's in a unit, it doesn't matter if you even have a static or dynamic route, it doesn't matter if you set it to dynamic

If it's not connected to the unit's route, and you don't want to change the allocation method of the computer IP, then you can only change the route settings.

Here's how: Configure the incoming route.

Locate LAN settings.

Change the IP address allocation range to the range of the IP assigned by your organization, for example, the IP address assigned by your organization.

Then you change it.

In this way, your computer's static IP will be in the IP allocation pool of the router, and you can use the Internet in the unit and this router in the future.

Hope it helps!

The router configures a static IP address to access the Internet.

If the connection is successful, the phone has found a wireless signal. However, wireless routers cannot connect to the Internet through the work network.

You need to configure the router and treat the fixed IP given to you as the ISP address gateway, see the manual for specific operations.

The key is that if the unit IP is bound to the MAC, you also need to change the MAC address of the router.

Plug the network cable provided by the company into the WAN interface of your wireless router, connect the router power, find a network cable, connect your router and the computer, enter "Follow the wizard to set up, in the network connection mode, select the static IP, and then fill in the IP address assigned to you by the company, and after the next step and completion as required, you try again, and it should be OK."

If the connection is successful, it means that the communication between the mobile phone and the wireless router is normal, but it does not mean that the wireless router can be connected to the unit network. Static IP units are often made by the NMS for MAC

IP binding!

There are also routes added to the routes.

Beware of the same default IP address of the 2 routes, which will cause the whole network to be paralyzed! It's the right way for you to ask your network administrator to help you set it up.

It has nothing to do with the fixed IP of your unit.

You set the IP of your router to the address assigned to you.

Your own computer, etc., all automatically obtained.

I won't ask any more questions.

The computer can be changed to automatically obtain the IP address and the LAN port link of the router.

First, use a network cable, connect the LAN port of the router to the computer, enter the router (if you can't get in, the IP settings of the computer will be automatically obtained), set the WAN port of the router to a static IP, and fill in the IP, DNS and gateway assigned to you by your company. (If you don't know DNS and gateway, go to your colleague's computer and run cmd and enter ipconfig all)

LAN port is filled in as any number within 254, and it can't be the same as the WAN port) prompts to restart, and then the company plugs your network cable into the WAN port, and both mobile phones and computers can access the Internet.

If you can't access the Internet, you have bound a MAC address, and you can clone the MAC address. In the router settings (changed the LAN port IP, enter the router with the changed LAN port IP).

How to set up a wireless router on the company's intranet: The wireless router is used as a switch.

Note: Router A = Primary Router; Router B = Wireless Router.

1. Router A is set up normally.

2. Router B setting method:

Note: Disconnect routers A and B first, wait for router B to be set up, and then connect.

First of all, the WAN port should be vacated, and all the wiring should be connected to the LAN port.

Disable the DHCP service for Route B.

Change the IP address of the LAN port of Route B (not the same as the CIDR block of Router A) to IP address.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Simply set the RAN port of the router to the corresponding mask. Remember to turn off the DHCP service to the LAN direction.

It has nothing to do with it, after you enter the routing address in the browser, enter the account password to enter the wireless settings interface, and select the static IP that is set to the IP.

You didn't make it clear enough, so let's answer according to my understanding.

1. The company's line is used as an access, connected to the wireless router, and then set the static IP in the router to correctly enter the IP of the company's network. This is the setting as an access.

2. The output of the router can be, which will not affect the access, which is two different things. But the computer or mobile phone you want to connect to this wireless router needs to set the gateway to be ip:, so that, or simply, set it to automatically get it.

Summary: The company IP is used as the access, and the IP assigned by the wireless router is used. These are two different things, and they do not affect each other.

1. Enter the router.

Open the browser - enter the general router address is this or check the login information on the back of the router) enter the route - enter the user name, password, (the default is generally admin).

2. In [Network Parameters] --WAN Settings], select [Static IP] for the WAN port connection type, and enter the IP, subnet mask, gateway, and DNS to access the Internet.

Top dog! Router IP settings, are you setting up LAN IP or gateway IP? The first IP address set by the static IP is the one you mentioned above, and the gateway needs to fill in the LAN port IP DNS of a router and also fill in the higher-level router.

In this way, you should not fill in the correct gateway and DNS

Did you do this there with an ip--mac binding?

You have to copy the native Mac to the router.

Routers support this feature.

Then change your LAN address to what you need.

Above you said the address provided to you by the company.

Enter the settings on the WAN port.

It's a static IP

Connect the router first, then set the LAN port to, then select the WAN port setting, select the static IP, and then fill in the string above, and then turn on the DHCP service, fill in the DNS and spare DNS, save the settings, connect the WAN port with a network cable, and then connect the router through the wireless network should be able to surf the Internet.

Generally, when setting up a wireless router, you choose PPPoE to automatically obtain the IP address, and you choose to specify the IP address according to the steps when setting up.

The reason is simple, the subnet mask of your extranet is too large.

1-Modify the IP settings of the LAN port, it cannot be used, it can be set to 2-After modifying, it will lose contact with the router, at this time, the IP of your computer should also be changed to the network management off DNS with someone else for you or according to the actual situation).

3- Log in with your original account password.

4- Modify the WAN port IP to the one given to you.

Because it contains all the IP addresses, it contains the IP of your original LAN port, if you don't change the estimate, so the error is too big.

Company intranet (local copying.

Domain network), IP fixed, connection wireless routing method is as follows:

The key to using a router in a LAN is to set the IP of the WAN port of the router and comply with the IP rules of the LAN.

The WAN port of the router is connected to the switch;

The WAN IP rules must conform to the current LAN rules. Here's a simple way, first copy down the IP configuration of the computer you use, and set up the router WAN port according to this configuration;

If the MAC and IP are bound to the LAN, you also need to clone the MAC of the computer you are using to the WAN port of the router;

After the WAN port of the router has the correct IP, turn on the DHCP service in the router, then the IP of the computer you use will be automatically obtained, and you can connect to the LAN port of the router;

The private IP address of the router must not be in the same segment as the LAN IP address.

DNS is a private network address, which should not be able to access the Internet, or the private network address is mapped to the public network address.

Don't connect the unit's BAI network cable first, desktop computer.

The duip is set to be automatically obtained, and the LAN port of the router DAO is connected with a network cable, and the settings page is returned.

1. In the WAN port settings, select Answer Static IP, and write the original desktop IP, mask, unit gateway, and DNS in turn.

2. Find the MAC copy function (clone) and copy the desktop MAC address to the router. This step is not necessary to prevent the organization from binding the PC MAC and IP. If there is no limit on the unit, the third step can be omitted.

3. Turn on the DHCP function of the wireless router (it is usually enabled by default).

4. Wireless parameter customization.

After saving and restarting the router, plug the network cable of the unit into the WAN port of the router.

The computer IP is set to be automatically obtained, and the router is connected wirelessly or wired, and you should be able to surf the Internet normally.

The wire is wrong.

No problem according to the settings, connect the company network cable to the WAN port of TP.

Look at the network segment configuration seems to be a big company,Another thing to confirm is whether you have to go online**,If that's the case,You may have to do some more settings。