What should I do if the smart toilet doesn t flush after it gets up?

If there is a problem with the setting, just follow the instructions and look at it and reset it.

Smart toilets.

Originated in the United States, it was used for medical and geriatric care, and was originally set up with a warm water washing function. Later, through South Korea, Japanese sanitary ware companies gradually introduced technology to start manufacturing, adding a variety of functions such as toilet lid heating, warm water washing, warm air drying, and sterilization.

At present, there are three kinds of smart toilets on the market, one is an intelligent toilet with cleaning, heating, sterilization, etc., one is an intelligent toilet that can be automatically changed, and the other is an intelligent toilet with automatic change and cleaning function.

Briefly. The flushing also allows you to adjust the intensity of the water flow according to your personal preference. The water intensity can be adjusted in five levels to make you more comfortable. The water temperature can be adjusted in four levels, between (32-38) degrees, and you can choose according to your needs; The nozzle is automatically cleaned when in use. Suitable for ergonomics.

The design of the seat is equipped with an electric heating device, and the temperature can be selected between 25 and 40 degrees, which will give you a warm and comfortable feeling even in cold weather.

Antibacterial: The seat is made of antibacterial synthetic materials, and the experiment proves that the antibacterial powder is effective against Escherichia coli, Staphylococcus aureus and Candida albicans.

The antibacterial rate reaches more than 98%! Prevent cross-infection of germs at frequently touched sites during daily use.

First of all, we should know the reason why the smart toilet can't be flushed, which may be caused by the chip failure of the smart toilet, so we should check the chip of the smart toilet first, and if it does fail, we should immediately contact the after-sales service department of the smart toilet to deal with it.

1. The automatic flushing of the smart toilet fails. First, check if the smart toilet has enough power. If the power supply is normal, you can restart it.

Otherwise, it is recommended to find the manufacturer's after-sales service to deal with it. Due to the complex structure of smart toilets, there are many reasons why the toilet automatically flushes fail, such as button failure, chip failure, water tank blockage, etc., which is easy to be self-defeating.

2. If there is no problem with other accessories of the automatic flushing toilet during use, that is, there is no automatic flushing, it is likely that there is a problem with the button of the water tank. If yes, the button of the tank needs to be replaced. Of course, this is also quite professional maintenance, and it is recommended to choose a regular bathroom maintenance master to repair it.

There are two corresponding solutions to the smart toilet not flushing. One is to restart: the smart toilet does not flush because the toilet is not running out of power, or the plug is loose, you might as well restart it to see if the situation has improved.

After all, the structure of the smart toilet is much more complex than that of ordinary toilets, and there are many reasons why the toilet does not flush, such as key failure, chip failure, etc., if it is handled without authorization, it may be self-defeating and make the situation worse.

1. What is the reason why the toilet does not go to water?

1. If the newly purchased toilet does not go up to the tree, it is usually not a problem with the toilet parts, at this time you can check the toilet water tank system to see if the toilet is not equipped with a valve when it is decorated, and the valve can be installed to get water.

2. If it is not a problem with the toilet valve, you can check the situation of other cold water pipes at this time, and look at the sink, sink, etc., it may be because the hydraulic pipe is not professional, and there is a problem with the installation of the water pipeline, and then the plumber has to re-construct it. If it is a toilet, it is usually a problem with the water system, and then go to check the sewage system and repair it.

3. Another reason may be that there is a problem with the ball valve of the water tank: first cover the toilet lid, see if the water inlet valve and button can be topped, if so, adjust the orientation to see if the float and the float are moving up and down. If the water is stuck, you can't get in, twist the switch on the pontoon clockwise, the waterless float is suspended to indicate that the water inlet is blocked, and the water tank is filled with water to see if the pontoon can float up, and the problem can be solved if you can use the water freely.

2. What should I do if the toilet flushes weakly?

1. The side handle chain of the side press and side wrench toilet is long, which causes the water stop pad to stop the water quickly, although there is action. Solution: Please shorten it to the appropriate level.

2. The top pressing rod of the top press toilet is low, which causes the water stop pad to stop the water quickly even though it has action. Solution: Open the water tank cover, reverse, loosen the pressure rod nut, and adjust the length of the pressure bar to the appropriate one.

3. The water level of the inlet valve is low, resulting in weak water outlet. Solution: Remove the inlet valve and remove the inlet valve buckle.

Turn the inlet valve body counterclockwise. Then increase the height of the body accordingly. Then rotate the inlet valve body clockwise and attach the buckle.

Then install the inlet valve. Connect the filter and water inlet pipe, and the fault can be eliminated.

4. The ceramic glaze of the toilet bowl is not smooth enough, which is easy to hang dirt, and it will also cause the flushing to be unclean. Solution: If there has been a similar situation, it is a product quality problem, the glaze material is not good, let the merchant come to deal with it.

If you can rinse it before, but now you can't wash it clean, you can clean it more, don't use a corrosive washing liquid, it will damage the ceramic glaze, and it will be easier to hang dirt in the future.

5. Ceramic hanging dirt. Solution: In general, it is good to brush directly with a toilet brush.

If it is always easy to get dirty, a good toilet with ceramic glaze is better, use cheap toothpaste, be careful to be white, not the transparent kind, and then scrub with the green or blue rough side commonly used for dishwashing. If you haven't cleaned it for too long, you can use a steel wool ball to gently wipe it first. However, the use of steel wool balls and decontamination powder will damage the ceramic glaze, so don't use it if you can.

The reasons why the smart toilet does not flush are as follows:

1. It may be that the intelligent system is messed up, you can restart, delay and then flush to test.

2. There is also a situation that the chip fails and the water tank is blocked, and the toilet will not flush automatically, in this case, it is recommended to contact the manufacturer or after-sales service, because the structure of the smart toilet is complex, and it is easy to be self-defeating if you deal with it yourself.

How to do daily maintenance with a smart toilet:

1. Although the toilet has good waterproof performance, the smart toilet belongs to the plug-in type. And the smart toilet should be cleaned every day, but special attention must be paid not to pour water directly on the toilet when cleaning, so it is easy to damage the chip and solenoid valve, it is recommended to use a soft cloth to wipe it.

2. Generally speaking, the power supply of the smart toilet will not be disconnected, so it is necessary to pay more attention to its daily cleaning when cleaning, and disconnect the power supply first. Wait until the power is off before activating the toilet seat, so that the safety of the circuit can be ensured and electric shock accidents can occur.

3. In the daily use of the smart toilet, as long as there are stains, it must be cleaned in time, otherwise it will become difficult to clean, and some traces will be left if it is not cleaned for a long time. The extra smart toilet wipes the dust off its surface for a certain period of time.

4. The nozzle in the smart toilet is very important, and it is recommended to clean it at least once a month or two to ensure that the nozzle is in normal use. In addition, we must also pay attention when using the nozzle, if there is dirt on the nozzle, do not stretch it hard, use a small toothbrush to brush it clean.

Pro, the auto-flush function of a smart toilet is usually triggered automatically when the user stands up and leaves the toilet after use. If the toilet does not automatically flush after the user gets up, it may be due to the following reasons:1

Sensor failure of smart toilets: The automatic flush function of smart toilets usually uses sensors to sense the user's leaving of the shoe, and if the sensor is faulty or damaged, the automatic flush function will fail. 2.

Power problems with smart toilets: Smart toilets need power to operate, and if there is a problem with the power supply, it will cause the toilet's auto-flush function to fail. You can check if the power cord is loose or if the plug is in bad contact, or try to restart the smart toilet.

3.Smart toilet setting problem: Some smart toilets need to turn on the automatic flushing function in the settings, if the user does not turn on this function, it will not automatically flush.

You can check the smart toilet's user manual to learn how to set up the auto-flush function. 4.Smart toilet tank water level problem:

The auto-flushing function of a smart toilet requires that there is enough water cover in the tank to work properly. If the water level in the tank is too low, the auto-flush function will fail. You can check if the water level of the water tank is sufficient, and if it is insufficient, you can manually add water or adjust the water level of the tank.

If none of the above methods can solve the problem, it is recommended to contact the after-sales service or professional maintenance personnel of the smart toilet for inspection and repair.