What s wrong with a smart toilet not flushing?

As far as the situation used in my house is concerned, there are actually several situations, one by one, you can specify them one by one, and you can know by comparing them with an elimination method.

The first case is actually your toilet, well. There is no water in the water pipe, that is, it is flushed. There is no water in the water pipe, because if this kind of smart toilet is not a water storage toilet, it needs water in your water pipe before it can be flushed, and it can't be charged if it doesn't.

The second situation is that your flush outlet is blocked by foreign objects, that is, the water cannot come out or the water is not smooth, this situation is mostly due to foreign objects in the water pipe, such as some rust or scale and other blockage or long-term inapplicability, I will often have this problem. Then if you don't use it for a long time, its water connection pipe and the stainless steel pipe of the toilet will also have the problem of rust and blockage.

In the third case, that is, the current smart toilet, its interface has a separate switch, and it may not be turned on during maintenance. In this case, you can just turn on the switch.

The fourth situation is like this situation in our home, that is, the toilet in our house is remotely controlled, and if the remote control has no electricity, only the toilet can not receive the command signal. It also doesn't flush.

The fifth situation should be very small, very small, that is, the toilet itself has a quality problem, otherwise the flushing of the smart toilet has a separate control button, in the case of whether there is power on or not, it can be used, in other questions there is no problem, everything is in good condition.

1. Cause of failure: During the installation process, the holes are not aligned, so the water outlet is blocked. Solution: Find a worker to reassemble.

2. Cause of failure: If the hole is directly blocked by something, it will also cause difficulty in water discharge. Solution: Dredging is required after inspection.

3. Cause of failure: quality problems of the product itself. Solution: Negotiate directly with the merchant.

First of all, we should know the reason why the smart toilet can't be flushed, which may be caused by the chip failure of the smart toilet, so we should check the chip of the smart toilet first, and if it does fail, we should immediately contact the after-sales service department of the smart toilet to deal with it.

1. The automatic flushing of the smart toilet fails. First, check if the smart toilet has enough power. If the power supply is normal, you can restart it.

Otherwise, it is recommended to find the manufacturer's after-sales service to deal with it. Due to the complex structure of smart toilets, there are many reasons why the toilet automatically flushes fail, such as button failure, chip failure, water tank blockage, etc., which is easy to be self-defeating.

2. If there is no problem with other accessories of the automatic flushing toilet during use, that is, there is no automatic flushing, it is likely that there is a problem with the button of the water tank. If yes, the button of the tank needs to be replaced. Of course, this is also quite professional maintenance, and it is recommended to choose a regular bathroom maintenance master to repair it.

Smart toilet automatic flushing failure, first see if the smart toilet power is sufficient, if the power is normal, you can restart to see, otherwise it is recommended to find the manufacturer's after-sales service door-to-door treatment, according to experts, because the structure of the smart toilet is more complex, there are many reasons for the failure of the automatic flushing of the toilet, such as key failure, chip failure, water tank blockage, etc., random disassembly and assembly, easy to self-defeating.

Hope and likes, thank you, and I wish you a good mood every day!

Broken flush system? Or is the water out? Or is the main floodgate of the water closed?

If there is a problem with the setting, just follow the instructions and look at it and reset it.

Smart toilets.

Originated in the United States, it was used for medical and geriatric care, and was originally set up with a warm water washing function. Later, through South Korea, Japanese sanitary ware companies gradually introduced technology to start manufacturing, adding a variety of functions such as toilet lid heating, warm water washing, warm air drying, and sterilization.

At present, there are three kinds of smart toilets on the market, one is an intelligent toilet with cleaning, heating, sterilization, etc., one is an intelligent toilet that can be automatically changed, and the other is an intelligent toilet with automatic change and cleaning function.

Briefly. The flushing also allows you to adjust the intensity of the water flow according to your personal preference. The water intensity can be adjusted in five levels to make you more comfortable. The water temperature can be adjusted in four levels, between (32-38) degrees, and you can choose according to your needs; The nozzle is automatically cleaned when in use. Suitable for ergonomics.

The design of the seat is equipped with an electric heating device, and the temperature can be selected between 25 and 40 degrees, which will give you a warm and comfortable feeling even in cold weather.

Antibacterial: The seat is made of antibacterial synthetic materials, and the experiment proves that the antibacterial powder is effective against Escherichia coli, Staphylococcus aureus and Candida albicans.

The antibacterial rate reaches more than 98%! Prevent cross-infection of germs at frequently touched sites during daily use.

Summary. If the smart toilet doesn't flush automatically after it gets up, there could be several reasons:

If the smart toilet doesn't flush automatically after it gets up, there could be several reasons:

Water source problem: Check whether the faucet on the side of the toilet is turned on and whether the water source is normal. If the water source is normal, you can check if the inlet pipe of the faucet is blocked.

Water tank problem: Check if the water level in the water tank is sufficient, if the water level is not enough, it may be that the water inlet valve of the tank is closed or blocked. At this time, it is necessary to open the water inlet valve or remove the blockage of the valve quietly.

Circuit problems: Check whether the power supply of the smart toilet is normal and whether there is a circuit fault.

If you can't solve the problem by yourself, it is recommended to contact professional after-sales service personnel for overhaul and maintenance. At the same time, it is recommended to follow the instructions in the manual to avoid failures caused by improper operation or incorrect use.

The reasons why the smart toilet does not flush are as follows:

1. It may be that the intelligent system is messed up, you can restart, delay and then flush to test.

2. There is also a situation that the chip fails and the water tank is blocked, and the toilet will not flush automatically, in this case, it is recommended to contact the manufacturer or after-sales service, because the structure of the smart toilet is complex, and it is easy to be self-defeating if you deal with it yourself.

How to do daily maintenance with a smart toilet:

1. Although the toilet has good waterproof performance, the smart toilet belongs to the plug-in type. And the smart toilet should be cleaned every day, but special attention must be paid not to pour water directly on the toilet when cleaning, so it is easy to damage the chip and solenoid valve, it is recommended to use a soft cloth to wipe it.

2. Generally speaking, the power supply of the smart toilet will not be disconnected, so it is necessary to pay more attention to its daily cleaning when cleaning, and disconnect the power supply first. Wait until the power is off before activating the toilet seat, so that the safety of the circuit can be ensured and electric shock accidents can occur.

3. In the daily use of the smart toilet, as long as there are stains, it must be cleaned in time, otherwise it will become difficult to clean, and some traces will be left if it is not cleaned for a long time. The extra smart toilet wipes the dust off its surface for a certain period of time.

4. The nozzle in the smart toilet is very important, and it is recommended to clean it at least once a month or two to ensure that the nozzle is in normal use. In addition, we must also pay attention when using the nozzle, if there is dirt on the nozzle, do not stretch it hard, use a small toothbrush to brush it clean.

Hello, I'll help you solve this problem! The operation steps are as follows: Reasons why the smart toilet does not produce water:

1. It may be that the nozzle is blocked, and it is recommended to set aside the nozzle for cleaning. When washing, you can wash it with a soft cloth moistened with water. 2. It may be that there are impurities in the water storage box, you can turn off the power first, take off the lid as a whole, see if the water storage box has dirt, and clean it.

3. It may be that the sensor or the receiver Fuhuibi switch is faulty, and it needs to be replaced by after-sales and Bijia professionals. You can try it according to the steps of my lack of celery, and you can give me feedback in time if you have any questions!