Hooks are generally hooked with multiple plumb sinkers, and hook bottom fishing is generally used wi

The fishing point is about 30 meters away from the shore, you can choose a 50 gram of plumb sinker, the closer the weight of the plumb sinker is, the smaller the weight of the plumb sinker, when fishing, it is necessary to consider a variety of factors such as weather, water conditions, fish conditions, etc., there is no standard weight.

Hand rod fishing in order to make the response of the fish drift more sensitive, when fishing, the lead sinker should be small and not large, should be light and not heavy, the lead sinker is too large or too heavy when fishing, there will be a sound when throwing the rod, it will startle the fish, the hook and bait will not sink to the bottom, it is more difficult to fish at the bottom, in still water, the hook should be slightly away from the bottom of the water without the bait, and the bait and hook are not far from the bottom after the bait is installed.

Crucian carp fishing time should be controlled at 2 3 cm, fishing for large carp, grass carp, the sinker and the hook spacing should be larger, generally 5 cm distance is very suitable.

Sea rods. When falling into freshwater fishing, the general weight is 15-60 grams, sea fishing.

The weight of the sinker will be greater, and the choice of sinker needs to be decided according to the hardness of the rod tip and the thickness of the fishing line.

When the sea rod is used, it is thrown away by its own gravity, and it is to make the bait group position at the bottom of the water, and the sea rod pendant is to choose the fishing rod is long and hard, the fishing line is thick, and the weight of the sinker should be heavy, and when the fishing rod is relatively short or soft, the fishing line is selected as a thin line, and it is suitable to use a small weight plumb sinker.

When hooking and fishing, the weight of the sinker can be selected according to the actual fish and water conditions. If the hook is far from the shore, you can choose a 50 gram lead sinker; If the hook is close to the shore, you can choose a lead sinker of about 45 grams; When fishing in still water, in order to avoid the sinker being too large or too heavy to startle the fish, it is generally necessary to choose a lighter or smaller sinker, such as a sinker of about 20 grams.

A 3-meter cast rod is used in fishing, and the weight of the sinker can be selected according to the casting distance (the distance of the fishing spot) in the string fishing method

1. The fishing spot is about 30 meters away from the shore, and you can choose a 50-gram plumb sinker.

2. The fishing spot is about 50 meters away from the shore, and you can choose 80 grams of lead sinker.

3. The fishing spot is about 70 meters away from the shore, and you can choose a 100-gram lead sinker.

The sea rod is about 50 grams of still water.

The flow rate and depth of the water depend on the flow rate and depth of 80-100 grams.

Hook bottom fishing, one of the ways to catch soft-shelled turtles.

That is, wrap about 30 meters of nylon fishing line around the plug board. One end is tied to the insert line, and the other end is tied to a jujube pendant (or flat dead pendant) weighing about 20 grams. On the main line at the upper end of the stone, 5 10 long-handled hooks are tied in turn.

The interval of the hook is about 8 10 cm, and the brain line is 6 7 cm long. Put on the bait, throw it towards the fishing spot, and retract the line to keep it tight. Wait for the turtle to take the bait. Anglers can put 10 or 20 pairs of plug-in boards in a row, which is similar to staking fishing.

It can be equipped with a small plumb sinker, and the plumb sinker can also be shaped.

Tips: 1. You can control the distance between the lead sinker and the bait hook (so as to avoid getting stuck in the mud);

2. The bran cake can be large or small;

3. The hand rod and the throwing rod are universal (with a connecting ring), which is very convenient to use;

4. The fish is not lower than the flap (there are many people who use it, and the effect is unanimously praised).

Liuyang hook fishing grass carp skills:

1. Selection of fishing position.

Grass carp mainly eats grass, and the best choice of fishing position is on the route of grass carp foraging and migration, such as aquatic weeds, algae and other green aquatic plants, with high oxygen content and abundant food resources. In quiet waters, shallow water with aquatic weeds or broken grass or leaves, it generally means that there are grass carp nearby.

2. Bait selection.

Grass carp is mainly vegetarian, eat a lot of food, it is best to fish grass carp in advance to make a heavy nest, the nest material should ensure a large amount, sufficient, and it is recommended to continue the nest every hour after the nest.

Playing grass nest is one of the best ways to catch grass carp when you are fishing. In the morning, when the fish floats, you can play a floating grass nest, cut some fresh grass on the shore, cut it into small sections, and throw 5-10 sections at a time on the surface of the running water. When the grass carp is in the underwater layer, it can sink the bottom of the grass nest, tie stones or bricks to the grass ball, and throw it vigorously to sink to the bottom.

It is about 15 cm, but it needs to be selected according to different situations. 15 centiam potatoes with Shen rice left and right, more suitable, but also the first choice in fishing. 15 to 30 cm, suitable for fishing large fish. Wild fishing is generally 15-30 cm.

The smaller the distance from the hook to the sinker, the more agile it is, and the greater the distance from the hook to the sinker, the blunt it is. When the strand is straight, the hook should be under the plumb sinker, which is a small lateral distance, so the sensitivity is higher. The more slack and bent the strand is, the greater the lateral distance and therefore the blunt.

There is a difference between the blunt nature of the double hook, and the long strand is a bit blunt compared to the short strand.

The bottom of the sinker is generally used for traditional fishing, it can be divided into a brain line bottom sinker and a brainless line bottom sinker, the brain line bottom sinker refers to the lead sinker and the hook has a certain distance, when the fish will be hooked in the mouth and raise its head to drive the lead sinker from the bottom float to reflect, therefore, the length of this distance determines the sensitivity of the level, the closer the distance, the higher the sensitivity, and vice versa.

The pendant, as the name suggests, means that the plumb pendant is suspended in the water, and it is basically a table fishing.

The way the fishing rig is matched. In this combination of the sinker, the fish only bears the weight of the bait after eating the bait (the gravity of the sinker is borne by the float), so whether it is a drift or a drift, in the case of reasonable fishing, as long as the fish sucks the bait into the mouth even if it does not raise its head and does not swim away, the float will also be reflected, so the sensitivity is very high. Due to its high sensitivity, it is more suitable for fishing light mouths, but it is not resistant to large currents.

The lead hook can be added with a lead sinker when it is light, but the use of a lead sinker is not particularly environmentally friendly, it is recommended to use bullet copper, and install a bead between the bullet copper and the hook eye when using it to prevent the bullet copper from constantly hitting the line knot when searching, resulting in a situation where the strength of the fishing rig becomes low.

The purpose of increasing the weight of the bullet copper is to use it for long-distance throwing, and it is to prevent the hook from hanging on the bottom, which is generally used when fishing for predatory fish, such as white stripes, pike, black fish, sea bass, etc., which are often used for lure fishing and sea fishing.

Generally, bullet lead is often used in Texas fishing rigs, and the common combination is crank hook + ball blocking bead + bullet lead, and Texas fishing rigs generally use soft bait, which is more common in searching for the bottom and waters with many obstacles.

The lead head hook has the difference of weight size, the size of the hook door with a large weight is also relatively large, the hook type has a variety of options like other fish hooks, and it is determined according to the actual water conditions and fish conditions when it is used, so when the weight of the lead head hook used is not enough, you can change the lead head hook with a large weight.

When choosing a lead hook, you need to check the stiffness of the hook bar, the lead head hook with poor stiffness is very easy to open the hook door and run the fish when the fish is in the middle of the fish, but it is also more suitable in the waters with many obstacles.

It is best to use 40-60 grams of lead sinker for sea rod hooks. Fishing is usually done with a sea rod, and there is no float to observe, but a bell instead.

If the bell rings once or not consecutively twice, there is no need to lift the rod, at this time there is no fish to lift the rod, only when the top of the rod is bent continuously, you need to lift the rod immediately.

It is best to bring some back when lifting the rod to prevent the fish from biting firmly, so that the hook can penetrate deeper into the mouth of the fish.

The sea rod must be equipped with a hook. First, pull out the wire loops of each section of the rod so that they are in a straight line. Then fix the feet of the reel.

Generally speaking, the crank will be on the right side of the ** wheel, and it can be installed directly on the right side. Thread the line through the loop from top to bottom and pass it out of the last loop at the end of the rod. After that, install the sinker, thread through the small hole in the sinker belt and hang it on the connecting ring, and hang the string hook on the connecting ring.

Once the hook is attached, the bait needs to be hung separately on different hooks.

<> 20-30 grams of lead sinker can be used to catch crucian carp with a string hook. When fishing for crucian carp, be sure to choose a time when the temperature is slightly warmer, when the fish are active and it is easier to catch the bait. Choose the right fishing position to hook, generally on the north or northwest shore of the water, and the water depth is about 2 meters to fish better.

The tools prepared are usually soft rods, thin lines, small hooks, small drifts and light sinks, and the use of bloodworms, earthworms, etc. as bait can improve the rate of catching fish.