How to move hydroponics and cultivated bowl lotus to the soil

According to the needs of bowl lotus planting, select the soil and put it into the flower bowl, put in clean water and mix the soil and fertilizer evenly. After the muddy water is clarified, the hydroponic seedlings are planted in the flower bowl, and the lotus root is all put into the mud to make the leaves stretch freely on the water surface. Care should be taken when transplanting that the petiole should not be broken so as not to affect the growth.

After planting, keep a 3-5 cm water layer, and do not submerge the leaves in water. The bowl lotus likes light, and the flower bowl should be placed in a sunny place. The seedlings are delicate and some will be scorched when exposed to the sun, but they will generally sprout and survive.

Don't water too much to raise the water temperature and promote growth. After 7-13 floating leaves have grown, vertical leaves can appear. Multifloral varieties begin to bud after 5-17 erect leaves.

Budding varies early and late depending on the species, and some varieties bloom before the leaves grow.

Bowl lotus likes fertilizer, if there is a lack of fertilizer, it will take root and grow leaves slowly, and lack vitality. Therefore, a small amount of rotting cake fertilizer or bean bran and peanut bran should be mixed into the potting soil before planting. However, it is not allowed to over-fertilize, especially because the bowl lotus container is small, the plant is small, and the amount of fertilizer required is also small.

More severe cases can cause the plant to die. If excessive fertilization is found, the water should be changed frequently to remove part of the fertilizer and make it waterless. Generally, a small amount of basal fertilizer such as cake fertilizer is mixed into the culture soil during planting, which can meet its needs throughout the year, and there is no need to apply top dressing to avoid overgrowth.

However, in order to prolong the flowering period, you can use a plum kernel-sized rotten cake fertilizer crumbs as top dressing in summer, and stuff it into the mud of the bowl. Do not apply around the walls of the bowl. It is easy to cause root damage.

The base fertilizer should not be applied too much, otherwise the light leaves are lush and the flowers are sparse, and the heavy ones will burn the lotus root to death.

Likes full sunshine and is not tolerant of shade. It likes heat, and the suitable temperature for growth is 20-30, and the growth is stagnant when the temperature is lower than 15. Likes moisture and is afraid of dryness, and likes relatively stable still water.

Fertile clay soils rich in organic matter are preferred. The appropriate pH value is: The hot summer of bowl lotus is its peak growth period.

8 -10 budding, 14 lotus root whip begins to elongate, 23 -30 is the growth and development temperature, 28 or more flowering, 35 or more slow growth, 40 stop growing or even die. Avoid heavy winds after rain or strong winds. At 25 o'clock, a new lotus root grows.

The bowl lotus likes strong light, and strong light is conducive to its development. It also likes water and is afraid of flooding, the water depth is easy to rot leaves, the water should be shallow in the early stage, and gradually deepen in the later stage. Like fertilizer and not tolerant to fertilizer, heavy fertilizer is easy to rot stems, base fertilizer should be sufficient, top dressing should be less.

The requirements for soil are not strict, and they like fertile slightly acidic clay soil, and generally fertile river mud or vegetable garden soil can be. It takes about 60 days from planting to flowering.

Bowl lotus likes full sunshine, if the light is less than 4 hours a day, it cannot form flower buds. During childbirth, it should be placed on a sunny balcony or a sunny place on the windowsill to receive full sunlight. When the floating leaves are covered with the basin surface, the floating leaves should also be pressed into the bowl mud in time to avoid affecting the ventilation and light transmission.

The bowl lotus plant is delicate, and it needs to be properly shaded around noon in summer and early autumn to avoid direct sunlight. If exposed to direct sunlight, the leaves and petals are scorched.

After one year of cultivation, the fertility decreases, and the underground rhizomes are dense, so it is advisable to turn the bowl and change the soil before germination in early spring every year.

Gardening: Hydroponic tutorial on the planting method of bowl lotus, learn these points to successfully raise bowl lotus.

Just dig a pit in the soil and bury the bowl lotus in it, bury the leaf heart on the lotus seed into the soil when planting, and add water after planting.

1. Seed treatment.

Plants are developed from seeds, so the first thing to do to hydroponic bowl lily is to cultivate bowl lily seeds. From the market to buy some healthy bowl lotus seeds, the seeds have a small bulge at both ends, and the other end has a small pit, with a file at home to fold the pit point of the section to rub, the part of the seed coat is wiped off, and then with a vice to break it, and then use a utility knife to cut off a small piece of seed coat on the seed line. During this period, it is necessary not to hurt the kernel inside the seed, and at the same time, it is not possible to remove the mouth on the outside of the seed, the purpose of dermabrasion is only to make the seed better absorbed.

2. Soak seeds to promote germination.

Prepare a basin of warm water and soak the processed seed stall macros. Note that the temperature of the water is best between 20 and 40 degrees, the temperature is lower than 20 degrees, and the water temperature is insufficient, and the germination rate of the seeds after soaking is very slow. In the germination stage, the seeds mainly rely on the part of the broken skin to absorb nutrients, so do not have too large nutrients.

At the same time, we should pay attention to maintain a good and stable water temperature, the weather has been sunny in recent times, the temperature is relatively high, after the temperature reaches 30 degrees, the speed of seed germination is generally relatively fast, and it only takes 3 to 5 days to promote germination, if the temperature is about 25 degrees, it will take about 7 days.

3. Transplanting of sprouts and seedlings.

When the plant has two leaves and one stamen, the plant should have a white root system, which indicates that the bowl lotus sprouts can be transplanted and planted. Prepare a ceramic or plastic pot with a diameter of about 45 to 75 cm, and transplant the bowl lotus. Note that the best time for transplanting is in the evening on a sunny day, so that the temperature is milder and the survival rate of the plant is higher.

After planting, it is not possible to let it receive daylight immediately, and after a while, it can be placed indoors in a well-lit place. Daily watering should not be too much, gradually increase the water temperature to promote its growth.

Hydroponic method of bowl lotus seeds: seed treatment, seed soaking and germination, germination and maintenance, transplanting hydroponics, Zheng Wang management and maintenance.

1. Treat the seeds

The seeds of the bowl lotus should be treated before hydroponics, because the skin of the seeds is hard, and the new shoots cannot break out during hydroponics, so the end of the seeds with concave points should be rubbed on the ground, or cut off with a knife, so that the bowl lotus seeds can expose a small opening, so that the seeds can grow after absorbing water.

2. Soak seeds to promote germination.

The most important step in hydroponic bowl lotus is to soak the seeds to promote germination, prepare clean water, control the water temperature between 20-40 degrees, and then soak the seeds directly in water, and keep bending to change the water for it every morning and evening to avoid turbidity of water quality affecting the germination of bowl lotus.

3. Germination maintenance

The temperature of the surrounding environment should also be stable between 20-30 degrees when soaking seeds for bowl lotus seed germination, waiting for about 3-5 days The seeds will grow small buds, if the pure bush has not germinated after 7 days, the seeds should be taken out, so as not to soak for too long to affect the healthy growth of the seeds, and then change the water temperature again, and the bowl lotus will take root and grow leaves after 2 weeks.

4. Transplanting hydroponics

Prepare a clean container and suitable water quality, transplant the Wanlian seeds that have taken root and grow leaves directly into the container, and add ceramsite at the root system to fix the plant, so that the water level can be kept below the leaf surface, and the leaves should not be submerged, and finally placed in a ventilated place for maintenance.

5. Management work

When the bowl lotus is hydroponic, it can be placed in full sunlight for maintenance, and the water needs to be changed every half a month to maintain the quality of the water to make it grow better, and you can also drop a few drops of nutrient solution in an appropriate amount to provide nutrients to the bowl lotus in time.

1. Treat the seeds

The seed shell of the bowl lily is relatively hard, and the seeds should be treated before hydroponics. Place the concave end of the seed on the ground and rub it, or cut it off with a knife to expose a small opening and soak it in water, so that the seed can absorb water.

2. Germination treatment.

The processed bowl lotus seeds should also be germinated. Prepare clean water at a temperature of about 20 to 40, then soak the seeds of the lotus in the water and change the water once a day.

It is also necessary to control the surrounding temperature, preferably between 20 and 30, so that the seeds will germinate in three to five days. After germination, the bowl lotus seeds should continue to change the water and control the temperature, and small leaves will grow in about two weeks.

3. Transplanting hydroponics.

Once the leaves have grown from the bowl lily seeds, they can be hydroponics. Start with a clean hydroponic container and water quality suitable for its growth. Place the rooted lotus seeds in a newly prepared container, and the root part should be fixed with small ceramsite.

After processing, water can be added to the container, the amount of water is well controlled, and the leaves should not be submerged under the leaves. Finally, just add the right amount of nutrient solution, and the hydroponic work is completed.

4. Later maintenance.

If you want the bowl lotus to grow better, you must provide a suitable environment for its growth in the later stage. It likes light, and usually needs to be placed in a well-lit environment to let it bask in the sun. It is best to stabilize the temperature at about 25 degrees, not cold-tolerant, pay attention to control the low temperature.

In addition, make sure that it is well ventilated and placed in a well-ventilated place. Indoor maintenance needs to open windows frequently for ventilation.

Morphological characteristics

The leaves of the bowl lotus are round, with floating leaves floating on the surface of the water and standing leaves extending above the surface of the water; Whereas, the leaves of water lilies are round with notches, and only the floating leaves float on the surface of the water.

The underground stems are long and thick, with long nodes and rounded leaves. The flowering period is from June to September, it is solitary at the top of the peduncle, with many petals, embedded in the receptacle, with red, pink, white, purple and other colors, or with colored patterns and borders. The nuts are oval in shape and the seeds are ovate.

Hydroponic bowl lotus seeds, this kind of water must be put, anti-rot, promote germination quickly.

1. Container: When hydroponic bowl lotus, you need to choose a wide-mouth shallow pot with good light transmittance. 2. Germination:

Make a cut on the raised part of the bowl lotus seed, and then soak it in warm water for 2-3 days to promote germination. 3. Planting: Bury the germinated bowl lotus seeds in the soil, and then inject water.

4. Maintenance: Add nutrient solution or liquid fertilizer dropwise once a month to make the bowl lotus bloom quickly.

1. Select a container

In the selection of hydroponic containers, it is best to use transparent shallow pots, which are conducive to ornamental hydroponic growth. Be sure to thoroughly clean and disinfect the hydroponic container so that all bacteria stored in the vase can be eliminated, such as healthy bulbs.

2. Select the seed

Choose healthy and plump lotus seeds, and use a knife to make a small opening on the round and raised side of the seed, taking care not to hurt its germ. Soak the seeds in warm water for 2-3 days, and germinate after 3 days of soaking and germination, and the germ sticks out from the breach.

3. Hydroponic colonization

Place the budding bowl lotus in a hydroponic container, and in order to prevent the roots from floating, you can spread a layer of coarse sand under the bottom to slightly press down on the roots. Then pour in an appropriate amount of water, preferably rainwater, if it is tap water, it can be left for a few days before use.

4. Maintenance management

Change the water once a day, keep the potting soil clean and clean, and remove seeds that can't germinate. Regular and appropriate spraying of nutrient solution during the growth period is conducive to rapid and healthy growth. Get plenty of sunlight every day to keep the environment warm.

1. Container: When hydroponic bowl lotus, it is necessary to clean and disinfect the hydroponic container. 2. Hydroponics:

Add fertile mud pond soil to the container, plant the bowl lotus into the soil, and pour two-thirds of the lake or spring water into it. 3. Maintenance: Place the bowl lotus in a bright place, and change the culture water once a week.

1. Prepare the container

Hydroponic bowl lotus can choose a relatively shallow container, so that it is convenient to observe its growth, the container needs to be disinfected before use, otherwise it is easy to infect the plant with germs, and then add an appropriate amount of soil in the container, which can play a role in fixing the plant.

2. Hydroponic colonization

When performing hydroponics, you need to choose a strong and disease-free bowl lotus plant, then fix its roots in the soil to prevent its roots from floating, and finally pour in an appropriate amount of water, the water quality can choose rainwater or pure water. It is also necessary to add an appropriate amount of nutrient solution to the water, which can help the growth of bowl lotus.

3. Maintenance management

Hydroponic bowl lotus needs to keep the water clean, and it needs to be changed immediately after seeing the turbidity of the water quality, otherwise it is easy to be infected with pests and diseases. When breeding, it also needs to be maintained in a ventilated and bright place, and it receives about 8 hours of light every day, and if the light is insufficient, it is difficult for its flowers to open.