How to prune longevity flowers to make a beautiful shape?

It can be pruned according to the shape of the longevity flower, and it can also be pruned according to the growth state of the longevity flower, so it will be pruned very beautifully.

First of all, the residual flowers and leaflets should be pruned, leaving the bud points to promote lateral branches, and then the top leaves should be cut off. Larger leaves also need to be removed and then topped so that they can be cut out beautifully.

You can cut off the withered branches and leaves of the longevity flowers, and then prune the top of the flower.

In addition to these two methods, when pruning longevity flowers, you should choose a little taller branches, look at the wilted and yellowing and flowering branches, and those who grow in a crowded environment, plant branches grow irregularly are given pruning.

Pruning in spring and autumn is a good time to prune, but in spring and autumn, you should choose when the longevity flowers are not blooming, if they do, you should wait for the flowers to wither before pruning, but remember to prune before September regardless of whether they bloom or not, which will help the longevity flowers store nutrients and bloom.

When pruning the longevity flowers for the first time, it is necessary to pay attention to the height of at least 5cm under the longevity flowers, and then keep the construction of about 12cm, do not cut off the branches and leaves, otherwise the plant will not be able to breathe, if the branches and leaves are too few, it can not provide nutrients to the plant, which can seriously affect the growth of the plant and cause plant death.

1. Prune.

For our cuttings to live longevity flower seedlings, it grows relatively fast, because there are more new roots, and the absorption of nutrients is more sufficient, so after it grows to a certain height, it is appropriate to retain a certain pole at the bottom, and cut it directly from the top, so as to leave a section of the pole and the pot soil surface There is a certain distance, the ventilation at the bottom is better, and it is not easy to cause rotten leaves, and the moisture on the soil surface can quickly volatilize off a part, and it is not easy to silt up after watering, resulting in rotten roots and rotten leaves.

After the pruning is completed, it will quickly grow a number of side buds at the top, these side buds grow to a certain height, we go to keep three or four leaves, cut off the top directly, all the side buds are like this, so that after the topping, it will quickly grow a number of side buds again, the side buds will grow out and continue to top according to this method, and continue to cycle until autumn comes to stop pruning and topping, and then let it grow new shoots and bloom directly. This is the method of longevity flower pruning, which is very simple, and promotes more lateral branches to ensure that it blooms more.

2. Maintenance. The early seedlings are relatively small, we want to let it quickly grow side buds, the trunk quickly thickens, when the leaves grow enough more, long hypertrophy, we have to ensure that the fertilizer and water are sufficient, generally, it is during the seedling period, novices directly use multi-element nutrient solution, nitrogen, phosphorus and potassium balance on it, if you find that your longevity flower seedlings grow slowly, you use high nitrogen content, other elements are not missing, such as the flower of the tenth, fertilization is guaranteed to give her about twice a month, the concentration is not too high, In this way, he will be able to get sufficient nutrients, quickly grow new shoots, quickly grow leaves, and the leaves will be more fat.

It is also necessary to ensure that there must be no lack of light in the growing season, to ensure that it will not grow in vain when it sees sufficient light, if you usually water, you must be under the premise that the soil is breathable, the potting soil is dry and timely to water him, do not use too large pots for cultivation at home, and choose a shorter pot, so that the longevity flowers we raise can grow strongly, and the leaves will grow more fat.

In fact, the longevity flower to cut seedlings rooting speed is very fast, just cuttings of the seedlings its growth is also very fast, if you do not raise the old seedlings of longevity flowers, you can follow the method of Xiao Qi to cut their own cuttings, prune properly after survival, from the seedlings to start pruning, until the autumn, absolutely can grow burst pots, branches and leaves burst out, in the autumn you go to supplement the phosphorus and potassium fertilizer, reasonable to it to see the light, once can be completely exploded.

First, topping.

The growth rate of longevity flowers is fast, and it is necessary to top and pluck it at the beginning of growth to control the height. The method is very simple, when it grows to 8 cm high, it will be directly removed from the small young shoots at the top, which can not only control the height, but also promote better germination of side branches, and can be topped many times during growth, and when the side branches reach a length of 6 cm, they should also be topped, so that more side branches can be germinated, and the plant shape will be fuller.

2. Prune branches and leaves.

During the growth of longevity flowers, it is necessary to prune them in time, mainly for diseased and insect branches, dead branches, yellowing branches, etc., and prune them off in time to reduce nutrient consumption, which can promote better ventilation and light transmission inside, and promote the healthy growth of longevity flower seedlings, and the plant type will become more beautiful.

3. Prune after flowering.

Longevity flowers should be pruned in time after flowering, and the residual flowers on the top should be cut off, preferably together with the flower branches, so as to promote the germination of new branches and also facilitate the next flowering.

Longevity flower cultivation method.

1. Soil: Choose loose and well-drained sandy soil, or mix garden soil, sandy soil and humus soil in a ratio of 2 to 2 to 4 to make breeding soil, or you can also buy special soil directly from the flower shop.

2. Light: Light is one of the characteristics of longevity flowers, so when we breed longevity flowers, we can breed them on balconies, windows and other places where we see light. However, in the hot summer months, we need to take measures to shade or move to a diffuse and ventilated place for farming.

3. Watering: The root system of longevity flowers has a certain water retention, so drought tolerance has become one of its characteristics. Therefore, watering every two or three days is sufficient, especially in the summer, and in the winter to reduce the watering time. When watering, we should pay attention to whether there is standing water in the pot.

1.The topping of the longevity flower is to pinch off the seedlings at the top of the longevity flower, control the growth and growth height of the longevity flower, and force it to germinate the side branches and side buds, so that the plant will not appear monotonous, and in the subsequent flowering period, there will also be flower bud points on the side branches, which will be vigorous and beautiful. 2.

In the growth process of longevity flowers, it is inevitable that there will be relatively weak branches, as well as some dead branches and rotten leaves, diseased branches and weak leaves, old leaves, long branches and leaves, etc., which need to be removed in time, otherwise the whole plant of longevity flowers will have a large amount of unnecessary nutrient loss, affecting its health.

When pruning, you should cut off the long shoots and keep the trunk so that the leaves can better absorb the sun.

Kalancho is a common flower in home life. To prune longevity flowers, cut off excess side branches. Ensure ventilation between the leaves. so as not to damage the leaves.

1. Topping: cut off the top seedlings at the early stage of growth to control their upward growth. 2. Prune branches and leaves

Regularly cut off all weak and diseased branches. 3. Plastic pruning: cut off the residual flowers and the second pair of branches, which is conducive to the second flowering.

4. Post-maintenance: spray carbendazim solution on the wound for disinfection.

1. Topping

In order to make the longevity flower grow vigorously, it is necessary to topping at the beginning of growth, cut off the seedlings at the top of the plant, control its upward growth trend, and make the side branches sprout outward.

2. Prune branches and leaves

During the growth period of longevity flowers, it is necessary to regularly cut off all the weak growth, over-dense growth, diseased branches, dead branches and yellow leaves to avoid the waste of nutrients, concentrate the nutrients of the main part, increase the light transmittance of the branches, and make the plants grow evenly and healthily.

3. Shaping and pruning

After the flowering period, you can cut off the residual flowers on the longevity flowers and the second pair of flower branches, which is conducive to the germination of new shoots and the second flowering, and then regularly prune the plant to your liking, and cut off the rotten roots and old roots on the root system when changing pots.

4. Later maintenance

After the pruning of longevity flowers, the wound should be carefully maintained, not let the wound be wet, and spray carbendazim solution on the wound for sterilization and disinfection, and in the early flowering stage in September, it is necessary to stop pruning to avoid causing the plant to fail to bloom in the later stage.

1. Choose the pruning season: if the longevity flowers have not yet bloomed, you can choose to prune in spring and autumn, if they have bloomed, you can choose to prune after the flowers wither, but whether they bloom or not, prune the branches before September, so that the longevity flowers can reserve nutrients to bloom.

2. Pay attention to the length of pruning: the first pruning should leave at least 5cm of height for longevity flowers, and the height of pruning should be kept at about 12cm in the later pruning, so as to avoid too few hail leaves in the remaining branches, and photosynthesis can not produce enough nutrients **Plant growth, resulting in plant death.

3. Select pruning objects: In addition to topping and staring at the top for the first time, the pruning objects of longevity flowers should be selected in the branches with a height of more than 12cm, yellowing and withered branches, branches with withered flowers, branches that are too dense and branches that destroy the overall plant shape.

4. Topping: After the longevity flower cuttings are lived, when the plant grows to about 5cm, you need to prune off a pair of new shoots at the top, and then observe the growth.

5. Topping: When the growth height of the longevity flower reaches about 12cm, it is necessary to prune off the part of the plant higher than 5cm before the flower buds appear, and in addition, after the flowers wither, the flower branches should be pruned off from the first pair of leaves and the second pair of leaves.

6. Tapping: For those branches that are too dense to block the inner sunlight, or are malnourished and thin, they should be pruned from the connection between the branches and the main stem, and the effect of construction should be to make the branches and leaves evenly distributed, ventilated and breathable, and the sunlight can shine on the internal leaves.

Longevity flowers should be topped during the growth period to control the size of the plant. When it grows to about 6 cm and has 4-5 leaves, it is ready for the first topping. Topping is also done when it grows to a height of 12 cm, this time to control the height of the plant and promote flowering.

If you want to ensure the flowering quality of longevity flowers and make them bloom more vigorously, you need to properly thin the buds. For the new branches, only 1 flower bud can be retained, and the old branches can be kept 2-3, which can not only ensure the number of flowers, but also make the flowers large and colorful. In addition, when thinning the buds, it is necessary to ensure that the flower buds are evenly distributed, which is more beautiful.

Prune once after the longevity flowers have bloomed. Remove residual flowers to avoid wasting water and nutrients. At the same time, some old branches should also be pruned properly to promote the growth of new branches.

You should also pay attention to pruning the longevity flowers every day. If the branches are too dense, proper pruning can increase the internal light transmission and ventilation, which is more beneficial to the growth of the plant and can prevent pests and diseases.

Longevity flower pruning mainly includes dormant pruning of sick and weak branches, topping pruning at the beginning of growth, thinning pruning during the vigorous growth period, pruning after flowering, these pruning methods, among which pruning after flowering is the most important, cutting can make longevity flowers bloom again, and the remaining three kinds of pruning do not necessarily need to be carried out every year, depending on the growth of the plant.

After the winter dormant period, before the spring begins to grow, you can prune a sick and weak branches, after a cold winter, it is normal to have some dead branches and weak branches, at this time they can be cut together, reduce the probability of longevity flowers, and can also save a lot of nutrients.

How to prune the longevity flower, topping during its growth period, can make it grow full and luxuriant, will not be too high, the new shoots on several main branches of the longevity flower are removed, inhibit its upward growth trend, promote its horizontal development, is very conducive to ornamentation and maintenance, is a more commonly used pruning method.

Thinning pruning is used less, generally in the longevity of the flowers are too luxuriant, the branches and leaves are dense when the pruning needs to be carried out, because the dense branches and leaves will have poor ventilation, the middle branches and leaves can not see the light, easy to disease, the middle branches and leaves will be black, so it is necessary to carry out thinning pruning.

After the longevity flower is gone, if you want it to bloom again, you need to carry out a major pruning, first cut off the residual flowers, and then remove the buds that grow too slowly, so as to save nutrients, it is the longevity flower to grow new buds, bloom the second flower.