Subject 2 exam rules details, what are the subject 2 exam rules?

The second subject is the most worrying subject for many students. Although there are only five basic items, they cover many detailed operations. The following details must be memorized in advance to prevent them from happening.

Before the exam. Exam items.

Relevant documents should be brought and indispensable, such as ID cards, admission tickets, etc.;

Shorter students can bring more spacers;

Dress and wear comfortable shoes.

Exam mentality. Go to bed early the night before the exam to ensure sleep time, which is conducive to relaxation;

Arrive early on the day of the exam to give yourself enough time to adapt to the atmosphere of the exam room and adjust to your best condition;

Waiting time for the exam, instead of chatting, you might as well spend time sorting out the exam process.

After getting in the car. Two hanging points.

Seat belts: The buckles of the seat belts should be fully embedded and cannot be unfastened once fastened.

Doors: Doors may be "false closed", so you need to check the dashboard twice after getting into the car.

Two adjustments. Adjust the seat: When the foot can easily press the clutch to the end, the hand is naturally on the steering wheel is the correct posture.

Adjust the rearview mirror: If you can see the distance between the rear wheel and the side line from the rearview mirror, the debugging is completed.

Note: The above two points need to be adjusted according to the height of the individual, and the standards vary from place to place, and the guidance of the coach shall prevail.

Three attempts. Try to step on the clutch and brake: Before starting, press the clutch and brake to the end, feel the height and tightness, and find the feeling.

Test steering wheel: The steering wheel of the test car and the coach car will be a little different, try to play a few laps before the test, if you feel that the resistance is larger, the amplitude of the play will be larger; Otherwise, hit the tap.

At the time of the exam. Clutch.

The whole process of clutch speed control should be "slow" and "stable", so the lifting range of the clutch should not be too large when driving, and it is easy to miss the point and lead to the line; But don't go too slow, or you'll stop or the project will time out.

Steering wheel. Section 2 is basically about the direction of the highlights, paying attention to "play fast and return quickly, and there is a fight and a return", and once you hesitate, it is easy to miss the best opportunity.

In addition, when reversing to adjust the body, remember to use the rear of the car as the front of the car, and hit the rear of the car in which direction you want, and the amplitude of the direction should be small when adjusting.

Brake. In the second exam, the foot brake needs to be matched with the clutch. When starting, first slowly lift the clutch to semi-linkage and then release the foot brake; When parking on a half-slope, the clutch and foot brake need to be pressed almost at the same time, and the clutch must precede the foot brake.

The starting handbrake must be placed to the end, otherwise it will easily lead to stalling.

Turn signals. When the two sides of the department go out of the warehouse and turn at right angles, you need to turn on the left turn signal, and you need to deduct points for late hitting, missing hits, and not closing in time. (The items that need to be lit vary slightly from place to place, subject to local conditions).

Gears. Ke 2 only needs to use the first gear and reverse gear, and you can use the afterglow to determine the gear position before hanging the gear to prevent the wrong gear. (In some places, the curve driving is completed in second gear).

End the exam. When the exam is about to end, sit steady and take every item seriously from start to finish.

Drive according to the prescribed route, confirm your test lane, and remember how to return to the starting point if you need to retake the test.

Students will take subject 3 tomorrow, do they have the ability to drive independently? Can I drive after getting a license?

Many students are already overwhelmed when preparing for subject 2, and there are many items and each one is not easy to take. But the really difficult thing is still in the exam, and the reasons for failing the course are really varied, so the dictionary has summarized some exam processes and rules today, I hope it will help you.

Exam process. 1. Sign-in:

Bring your original ID card and admission ticket to the waiting hall in advance according to the test date and session you have booked.

2. Waiting for the test: After entering the waiting hall, follow the instructions of the staff, do not make loud noises and walk, if you really need to leave, please say hello to the staff.

3. Get on the bus and prepare:

After getting in the car, adjust the seat, fasten the seat belt, and then adjust the rearview mirror to the right position for you, and then verify your fingerprint after all this is ready, and enter the corresponding test path according to the prompts.

4. Exam requirements:

There are two chances for each exam, and you need to pass all five elements to pass the whole subject two, otherwise you have to retake the exam. If you still don't pass the test after running out of two test opportunities, you need to practice again to make an appointment for the test.

5. End of the exam:

After the test, you should leave the test venue quickly, do not interfere with others to take the test, bring the sign-in number to the printing window to print your results and sign them.

Exam Rules. 1. You must bring your original ID card for the exam, otherwise you will not be allowed to take the exam!

2. When entering the waiting hall, you should also obey the coach's command, at this time, the coach will teach you some precautions for the exam, and you should pay attention to listening.

The rules for the Subject 2 exam are as follows:1Reversing into storage:

Do not drive in accordance with the prescribed route order (unqualified), the body out of the line (unqualified), and the warehouse does not enter (unqualified); Before reversing, the two front wheels did not exceed the control line (unqualified), the project completion time exceeded 210s (unqualified), and the halfway stop exceeded 2s (five points U002F were deducted). 2.Ramp fixed-point parking and starting:

After the vehicle stops, the front bumper of the car is not set on the pile line and exceeds 50cm (unqualified) and does not exceed 50cm (10 points are deducted), the starting time after the vehicle stops is more than 30s (unqualified), the wheels are pressed to the edge of the road during driving (unqualified), and the vehicle slips back more than 30cm (unqualified) when starting; After the vehicle stops, the body is more than 50cm away from the edge of the road (unqualified), the parking brake is not tightened after parking (10 points U002F times), the body is more than 30cm from the road edge line after the vehicle is stopped and not more than 50cm (10 points U002F times), and the vehicle is more than 10cm and less than 30cm (5 points U002F times) when starting.

The details of the Subject 2 exam rules are as follows:

1. Adjust the seat and mirror:

Adjust to your position and condition, and be sure to wear your seatbelt. It may seem like a simple thing, but it's easy to make mistakes when you're flustered and nervous. Therefore, it is important to practice several times before the exam to avoid deducting points for this low-level mistake during the exam.

Second, the side parking to find the right angle and speed of cooperation:

When parking, remember to find the right angle, and the steering wheel should turn quickly and react quickly. At the same time, it is necessary to match the speed of the car, otherwise it will cause the parking deviation to deviate from the position, and the deduction of points outweighs the loss.

Third, the ramp starts at a fixed point to stabilize the clutch:

When starting, pull the handbrake and be sure to release the handbrake with the left turn signal. At the same time, it is necessary to stabilize the clutch and release the clutch while stepping on the accelerator to avoid stalling and slipping. This part requires a good balance and needs to be practiced many times to increase skills.

Fourth, the right-angle turn quickly reacts to the turn after finding the right point

After finding the right turning point, you must react quickly to the turn and match the speed of the vehicle, otherwise it will be crooked. Pay more attention during training to hone your feel and reflexes.

Fifth, the curve driving should slow down and drive slowly:

In an S-corner, the safest way is to slow down. Of course, if the car feels good, you can try to pass quickly in one go. But before the exam, you still have to choose the appropriate method according to your actual situation.

Sixth, the speed of reversing and warehousing should be controlled

In the process of warehousing, it is necessary to control the speed and find your own reference point. At the same time, it is necessary to know how to fine-tune the return position when the rearview mirror is offset. This part requires a lot of practice to improve your skill level.

Subject 2 Exam Content and Process:

1. Subject 2 exam content:

Reversing into the garage, side parking, curve driving, right-angle turning, ramp fixed-point parking and starting.

2. Subject 2 examination process:

1. Prepare before taking the test. First, arrive at the test venue within the stipulated time and prepare all the required documents and materials, such as ID cards, learner driving certificates, etc.

2. Get on the bus and prepare. When entering the vehicle, the driver's seat and mirrors need to be adjusted to ensure a comfortable sitting position and a clear view. Then, a pre-check is required, which includes checking that various parts such as the brakes, clutch, steering wheel, etc., are working properly, as well as checking that the signal lights and horn are working properly.

3. The official examination begins. At the beginning of the test, students will complete five items in turn: reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, and curve driving. Candidates are required to follow the prescribed routes and movements, complete each item precisely, and pay attention to obeying traffic rules and signs.

4. The exam is over. At the end of the exam, the candidate will be notified of whether he or she has passed. If the test taker passes the test, they will be given a temporary driver's license that can be used for 30 days. If you fail to pass the exam, you will need to make a new appointment.

2. Operation skills:

1) Hit the clutch and brake; Hang reverse gear (new regulations: hit the right turn signal), release the handbrake; Loose foot brake;

2) Slow release clutch reversing; Looking back at the right rear, the middle column (black edge) of the right rear window is aligned with the right corner of the garage, and immediately moves to the right at a constant speed; As soon as you see the entire left sideline in the left mirror, you immediately return to the steering wheel. Observe the rearview mirrors on both sides and straighten the body; When the yellow horizontal line on the left just appears at the lower end of the rearview mirror, it stops, (3) shifts one gear forward, when the head cover is close to the white line (7 meters line) and is about to touch the white line, hit the steering wheel at a constant speed to the left, turn to the left, and the car stops straight and <>

3) Shift one gear forward, when the head cover is close to the white line (7 meters line) and is about to touch the white line, hit the steering wheel at a constant speed to the left, turn to the left, and stop the car straight, (4) do not need to turn back to the direction, keep the steering wheel to the left, directly reverse gear, and reverse backwards. At this time, pay attention to the left rearview mirror. When you see the entire right line in the right rearview mirror, you immediately return to the steering wheel.

Continue to observe the left rearview mirror, straighten the body, (5) shift a gear forward, when the front cover is close to the white line (7 meters line) and is about to touch the white line, hit the steering wheel at a constant speed to the right, turn to the right, and stop the car straight.

1. The subject 2 exam is divided into five items: reversing into the garage, stopping and starting at a fixed point on a ramp, turning at a right angle, parking in a side direction, and driving on a curve.

2. All five examination items must be passed at one time before the examination can be passed.

3. There are two chances to take the exam, that is, to take one and make up for one. If you fail the first exam, you will be retaken immediately. Those who fail to pass the make-up exam will need to make another appointment for the exam within 10 days.

4. After the test, candidates should leave the examination room quickly and must not interfere with others' test.

Subject 2 Exam Notes:

1) The first thing you do when you get in the car is to adjust the seat and mirrors to the right position and state for you, and be sure to fasten your seat belt. (This may seem like a no-brainer, but it's actually the easiest way to make this kind of low-level mistake when you're nervous.)

2) Remember to find the right angle when parking in the side direction, the steering wheel should rotate quickly, and the response should be fast to match the speed of the car.

3) Remember to pull the handbrake at the fixed point of the ramp, be sure to hit the left turn signal to release the handbrake at the start, stabilize the clutch, and release the clutch while stepping on the accelerator to avoid turning off and slipping.

4) Respond quickly to the turn after finding the right point in a right-angle turn, and be sure to match the speed of the vehicle, otherwise it will be crooked.

5) The safest way to drive on a curve (S curve) is to slow down and drive slowly, and you can pass quickly in one breath if you feel good when you usually practice driving.

6) When reversing into the warehouse, you must control the speed, find your own reference point, and know the fine-tuning when the rearview mirror is offset.

1. The examination of subject 2 requires us to pass all 5 assessment items at one time before we can pass the examination;

2. There are a total of 2 chances for each exam, and if you fail to pass the first time, you can make up the exam immediately, but if you fail to pass the make-up exam, you need to make an appointment again after 20 days;

3. After the test, candidates should quickly leave the driving vehicle and the test room to avoid interfering with others to conduct the test.

When we are taking the exam, if we fail a project due to improper operation, we can go back to the starting point and start the second exam. However, YY recommends that when you fail the first time, whether it is the first failure or the last failure, you must complete all the items, which can make you more experienced next time, so that the second test is less likely to make mistakes.