Magotan driving chassis abnormal noise, what s going on?

Updated on Car 2024-08-11
6 answers
  1. Anonymous users2024-02-15

    Hello! Glad for your question.

    Loose chassis generally occurs in older cars, when the car is driving on bad road conditions, steering wheel.

    It will feel unstable, and there will be abnormal noises from the bottom of the car, usually the old driver can feel that the whole is a little loose, when encountering such a situation, it means that the chassis may be loose, and the reasons for this situation are divided into several kinds, only by understanding the reasons, can we better prevent this problem from happening.

    The first reason is the aging of rubber parts, we all know that the elasticity of rubber is particularly good, which can buffer the friction between parts and reduce noise at the same time. However, this kind of thing has a lifespan, and it will age after a long time, and the elasticity is not as good as before, so the buffering capacity will decrease, resulting in abnormal noise in each part, so it is necessary to check these rubber parts regularly and replace them in time.

    The second possibility is the shock absorber.

    The main function of this part is to inhibit ** when the car is driving in the dustpan.

    If the shock absorber is damaged, there will be a scoop phenomenon, so that the chassis is loose, so it is necessary to check the shock absorber more, and repair it in time if there is leakage.

    The third is the clearance of the parts, that is to say, the ball head may be loose, this part is like the joint of the human body, if the ball head is loose, there will be a large gap between the lever and other connected parts, if the gap is too large, when crossing some dustpan roads, the screws between the subframe and the suspension will be loose, then the chassis will become loose, so usually check these two parts. Thank you.

  2. Anonymous users2024-02-14

    If there is such an abnormal sound on the front wheel, focus on checking whether the suspension system is loose, mainly check the fastening screws of the shock absorber, and then check the fastening screws of the tires. For vehicles with electronic throttle valves, the failure phenomenon of acrylic car or acceleration weakness is mainly caused by the dirty throttle body, and it is recommended that you focus on checking the carbon deposition of the throttle. In the future use, we should try to avoid idling in place for too long, so as to avoid the generation of carbon deposits.

  3. Anonymous users2024-02-13

    The creaking of the front part of the 14-year-old Magotan chassis over the speed bump in winter is due to the abnormal sound caused by the hardening of the shock absorber cushion rubber. It is a normal phenomenon, if you don't want the buffer rubber to make an abnormal sound, you can change to a brand new, the car shock absorber is not directly connected with the body, and the part where the shock absorber is connected with the body has cushion rubber.

    The cause of the abnormal noise in the front part of the chassis

    In winter, the temperature is low, the rubber will become hard, so the car will have abnormal noise when passing through some speed bumps, and the rubber parts will also harden after aging, so that there will be abnormal noise when passing through some speed bumps, if you want to eliminate abnormal noise, you can replace the aging and hardening buffer rubber, it is normal for rubber parts to age after long-term use, and all rubber parts in the car need to be replaced regularly.

    There are many rubber parts on the chassis of a car. After the aging of these rubber parts, it will affect the texture of the chassis and the handling of the car, and after aging, the rubber parts on the chassis will have various abnormal noises, which will affect the driving experience and ride comfort.

    If you want to replace the shock absorber on the shock absorber, it is recommended to buy original accessories, and the shock absorber needs to be disassembled when replacing the buffer rubber, so after replacing the installed shock absorber, you need to align the car with four wheels, which can prevent the tire from grinding and running off, it is recommended that you usually use the car to love the car on time.

  4. Anonymous users2024-02-12

    No matter what "abnormal noise" there is, find the problem, repair it in time, and do not delay, which is the premise. According to the results of the inspection, the relevant faulty parts or personnel reasons such as missing, reverse installation, and unfastened should be dealt with and repaired in a timely manner. Eliminate potential safety hazards.

    It is recommended that the special car be repaired, directly sent to the after-sales service for maintenance, find problems, send after-sales maintenance one can protect the original parts, the other is to ensure the after-sales service, for the insured vehicle, you can also go directly to the after-sales maintenance, so that the safety is guaranteed.

    The "squeak" of the Volkswagen Magotan chassis has many aspects:

    1. Abnormal noise caused by looseness and deformation of the lifting parts of the chassis part.

    2. Abnormal noise from tire noise.

    3. Abnormal noise from chassis parts such as engine or transmission internal parts.

    4. Abnormal noise from various transmission devices, such as front axle, rear axle (according to the drive structure), connectors, etc. Noisy potato kai.

    5. Abnormal noise from front and rear wheel bearings.

    6. Abnormal noise of parts caused by negligence and carelessness of personnel in many aspects such as unfastened gong wires, mutual interference or wrong position of parts, reverse installation and other human reasons during installation, replacement, overhaul and other usual maintenance. This kind of is dangerous.

    7. Abnormal noise from various important safety components: such as the brake part, there may be wear of the brake pad or the abnormal sound of direct dry grinding of the disc to the limit; There is a chassis abnormal sound caused by the lack of fuel due to power steering; There are some abnormal noises caused by the round hand of the electrical circuit, such as the wrong action of the actuator (such as four-wheel drive).

    Photo by Shi Lili of Pacific Automobile Network).

  5. Anonymous users2024-02-11

    The abnormal sound of the Magotan steering wheel is a common problem of a certain batch of 2018 models. There is a batch of cars that have this problem. Phenomenon: Hit the direction sharply, hit the direction in place, hit the direction slowly, and the steering wheel will make a clicking sound of "Rodda".

    There are only two solutions (and you can only do this if you go to a 4S store):

    1.Replace the steering wheel and airbags.

    2.Remove the steering wheel. To be precise, remove the horn from the steering wheel and wrap the three springs in the back with duct tape, and the problem can be solved.

    If it is an old Magotan model, the abnormal sound of the steering wheel may be caused by the following reasons:

    1.Steering oil reduction. Solution: Add steering oil.

    2.There is a problem with the gimbal. Solution: Adjust the gimbal joint.

    3.The steering column is not lubricated and the friction is excessive. Solution for chain fibrillation: Apply some lubricating oil.

    4.The chassis suspension eggplant is defeated and the rubber sleeve of the balance bar lifting lug is aging and hardening. Solution: Replace the rubber sleeve.

    5.The plane bearing is broken. Solution: Replace the flat bearing.

    Magotan is a car owned by FAW-Volkswagen. The official guide price is 10,000 yuan. The model is a mid-size car. In terms of power, the top-of-the-line model (380TSI) is equipped with a high-power inline 4-cylinder turbocharged engine with a maximum output of 162 kW and a maximum torque of 350 Nm.

    Millions of car purchase subsidies.

  6. Anonymous users2024-02-10

    Magotan Direction Book Disc There are many reasons for abnormal noise, which may be friction between plastic parts, aging of the ball joint of the tie rod, and steering gear failure. Be sure to double-check to find out what is unusual for noise.

    Possible causes of the abnormal noise of the Magotan steering wheel:

    1.Friction between plastic parts.

    Because the steering wheel is generally made of plastic, if the temperature becomes colder, the plastic will become hard, and there may naturally be friction sounds.

    2.The steering wheel makes an unusual sound.

    If the abnormal noise is coming from the steering wheel, the problem may be caused by the airbag balance spring in the steering wheel. Remove the steering wheel airbag hairspring and apply some butter to see if it's still ringing. If it still rings, replace the airbag hairspring as it is damaged.

    Take care to gently remove the steering wheel, or pull out the airbag fuse to prevent the airbag from popping.

    3.The tie rod ball joint is aging.

    If the tie rod ball joint is aging, it will cause the car steering wheel to shake and abnormal noise, usually replace the tie rod ball joint, and carry out four-wheel alignment after replacement.

    4.The balance bar makes an unusual sound.

    If it is not the sound made by the shock absorber, check the balance bar glue for loose or damaged pieces. If it is loose or damaged, it will make a sound not only when driving in the direction, but also when passing through uneven road surfaces. If damaged, it can only be replaced.

    5.Steering machine failure.

    If there is a lot of abnormal noise during steering, it may be caused by too large gear clearance between the steering gears, and the steering gear needs to be replaced.

    6.Improper tightening or aging of the power belt.

    For mechanical hydraulic assistance, if the power assist belt is not properly tensioned or aged, an abnormal sound will be heard, and the belt tension needs to be adjusted or replaced.

Related questions
12 answers2024-08-11

The balance lever commonly used in car modification is commonly known as "top bar, tie rod". The English meaning of bar is the meaning of pull rod. According to its different purpose and functional requirements, it is divided into five categories: front wheel suspension tower top balance rod, front bottom beam balance rod and so on.

6 answers2024-08-11

Oil leakage from the shock absorber. When the oil seal inside the shock absorber is aging, the lubricating oil inside the shock absorber will seep out, affecting the lack of internal lubrication. At this time, it can only be solved by replacing the shock absorbers. >>>More

8 answers2024-08-11

Generally, the abnormal noise of the automobile chassis may be: 1. The abnormal noise emitted when the vehicle starts is generally a fault of the suspension system, which may be caused by loose or damaged engine mounts; 2. The abnormal noise emitted by the vehicle when steering may be the fault of the steering system and the suspension system, because the vehicle is in the process of steering, the tilt of the vehicle makes the suspension system deformed; 3. The abnormal noise emitted by the vehicle when driving in good road conditions may be caused by the failure of the braking system components, that is, the braking system components are loose, worn, the brake drum is out of circle or the brake disc plane is uneven; 4. If there is a problem with the bearing between the vehicle connection and static, if it is a bearing problem, the driver can distinguish it with a little brake, if the vehicle does a uniform motion with a brake sound, it is a problem with the bearing; 5. Most of the abnormal noises that occur when the vehicle is driving in bad road conditions are the problems of the suspension system, or they may be caused by the loosening of the braking system; 6. Most of the abnormal noises emitted by the vehicle when accelerating, accelerating or parking are caused by the suspension system and braking system. The suspension system is mostly a grinding sound. >>>More

7 answers2024-08-11

Abnormal chassis noise is generally a suspension system problem, which often occurs in a relatively large vehicle in the car, or a vehicle after an accident has been repaired! >>>More

7 answers2024-08-11

It seems that this situation is mainly caused by a loose chassis, and it is recommended that you go to the repair shop to do a comprehensive inspection, and then carry out the repair.