What kind of board is formaldehyde free board?

Formaldehyde-free boards strictly do not exist, and there are only formaldehyde-free boards defined by relevant institutionsGenerally speaking, formaldehyde-free board is formaldehyde emission or, respectively, from the definition of wood China Forest Products Industry Association and the standard of the new national standard, but the acceptance of formaldehyde-free board is not high.

If according to the above two standards, even if the board adhesive contains formaldehyde, under the standard conditions of testing, the formaldehyde emission is lower than the above two standards, it can be called formaldehyde-free board. But this poses a problemIn the actual use environment, with the rise of temperature and humidity, the formaldehyde emission of this kind of board will increase, and even in the floor heating environment, it can reach ten times the detection data, resulting in serious excess of formaldehyde.

A similar concept is formaldehyde-free boarding, which means that the adhesive used to produce the board does not contain formaldehyde, and this kind of board can meet high environmental standards. The formaldehyde emission of this type of board is less affected by the actual use environment, and there will be no hidden danger of excessive formaldehyde.

At present, all types of furniture boards have achieved formaldehyde-free addition, such as MDI glue mainly used in particle boards, and HPA-free glue for large core boards and multi-layer boardsThese plates have been produced on a large scale, and the physical properties of the products have reached the level of aldehyde glue.

First of all, the wood itself contains trace amounts of free formaldehyde, which has no impact on health at all; Secondly, the ecological board with triamine paper finish will bring formaldehyde, which is less of itself, and is more likely to volatilize off concentrated on the surface of the board, in addition, most of the formaldehyde has been volatilized at high temperature during production, so this kind of decorative panel using formaldehyde-free substrate can still achieve very low formaldehyde emissions.

In addition, the use of formaldehyde-free glue does not mean that formaldehyde-free is added, and some board glues are limited to performance and cost reasons, and often are used with aldehyde-containing glue to achieve sufficient physical properties or cost performance. In the use environment of high temperature and high humidity, there will be a large gap between the formaldehyde emission level and the detection data.

Therefore,Formaldehyde-free board is a vague and unacceptable statement, so it is necessary to clarify the definition of formaldehyde-free board by the corresponding business. If possible, we still choose to use formaldehyde-free adhesive formaldehyde-free added board to ensure a healthy and environmentally friendly indoor environment.

Formaldehyde-free board is also called formaldehyde-free addition board.

1. The formaldehyde-free board is actually also called the formaldehyde-free board, which does not add formaldehyde glue, but this does not mean that the glue without adding formaldehyde does not contain formaldehyde.

2. This belongs to a kind of man-made board, the raw material of which is the wood itself, and the wood itself contains formaldehyde.

3. MDI glue is used in the manufacture of formaldehyde-free plates, which will not release formaldehyde, and will not release formaldehyde itself, nor will it release formaldehyde. The body does not release it at all, and such a state will not cause harm to the human body.

4. There are many kinds of boards, including high-grade boards, solid wood multi-layer boards, and wheat straw pressing, which are relatively cheap low-end formaldehyde-free boards, high-end boards, and higher-end high-grade formaldehyde-free boards.

Extension: A formaldehyde-free furniture identification method.

Take a look at the culture board. Due to the use of solid wood fiber raw materials, the cross-section of the "formaldehyde-free" board presents a unique dense sheet structure. Before the furniture is assembled, consumers can observe and identify it by punching holes and slotted sections.

Another trick, this is also the new furniture has a strong pungent smell, and the use of "formaldehyde-free" solid wood panels made of new furniture, especially cabinet furniture, open the cabinet door will have a faint wood fragrance. Identification by smell is also a simple method of identification.

If possible, you can obtain some leftover materials from the custom furniture manufacturer, and boil them in hot water to immediately distinguish the authenticity. For example, taking the wood incense board as an example, the water that has been boiled on the wood incense board will exude a clear fragrance of Pu'er tea, which is the taste of pure natural wood board after boiling; The boiled solution of ordinary wood incense board will exude a clear fragrance of Pu'er tea.

When it comes to formaldehyde-free boards, only people who have experienced decoration will have a deep experience, and it is better to use products to speak no matter how famous they are. The whole process from the base to the selection and processing of the materials is open and transparent, and the exquisite and complicated process is used to ensure the board without formaldehyde addition.

plasticity and environmental protection, which is incomparable to many plates, so if you want to say that you want to go to the aldehyde board, you can only serve Osborn.

1. Solid wood particle board.

1) It is a new, high-grade environmentally friendly substrate (a kind of particleboard), which is a wood-based panel made of wood or other lignocellulosic materials, glued under heat and pressure after applying adhesive. It is a board produced by the process of particleboard.

2) Solid wood particle board is a kind of wood-based board with small diameter wood, thinning wood, wood core, bark, branch wood, etc. as raw materials processed by special equipment to grow 40mm, 70mm, width 5mm, 20mm, thick flakes, through drying, sizing and special equipment will be the surface core layer planer staggered and staggered directional paving, after hot pressing and forming.

2. Formaldehyde-free board.

1) It is also known as fiberboard, which is a man-made board made of wood raw materials such as trunk wood, branch wood or other plant fibers through hot grinding, sizing, drying, paving and hot pressing, and the adhesive mainly uses urea-formaldehyde glue.

2) Its quality is soft and impact-resistant, the strength is high, the density is uniform after pressing, and it is easy to reprocess, and it has been widely used in many fields in China, but its disadvantage is that the waterproofness is poor, which also limits its scope of use to a certain extent.

Hello, there is no formaldehyde-free board in the real sense, it can only be said that the amount of formaldehyde released is divided into two categories in the strict sense of China's environmental protection standards, environmental protection E0 and E1 level, E1 grade plate formaldehyde content is higher than E0 grade plate, but the formaldehyde content per square meter of E0 grade plate is not higher, E0 grade plate formaldehyde content per square meter is lower, and environmental protection E0 grade can be used for any indoor decoration with confidence, so consumers must look at the brand and environmental protection grade when purchasing, Comparing health and environmental protection is a big deal.

Choosing flooring panels and laminate flooring can meet the requirements of home flooring to resist deformation. Friends who like the feeling of pure solid wood flooring should choose solid wood flooring, which is no different from pure solid wood flooring in appearance, and has a stronger ability to resist deformation.

Recently, there has been a concern about the new products of the aldehyde removal series launched by Dawang coconut board, look at the formaldehyde emission in the test report, the environmental protection standard is 6 times higher than the national standard, and the board will be more assured.

Healthy formaldehyde-free furniture is best built with solid wood, and it is definitely formaldehyde-free to build by yourself.

The so-called formaldehyde-free board is the board bonded by formaldehyde-free glue in the production and processing, and the best choice for home decoration is the formaldehyde-free board. There is no peculiar smell of New Zealand Zhige board, and the smell of the board is like wood that has just been opened, with a fragrance of trees. The appearance is finely done, and the joints of the plate are very tight, without a trace of gaps, and it is very smooth.

In fact, whether it is a solid wood floor or a composite floor, it contains formaldehyde, but the content is different, so the selection of flooring must choose a big brand, a big brand, green formaldehyde content up to standard, pasted on the wall makes people feel high-end atmosphere, durable and not deformed. But when buying, you must pay attention to the quality of any brand of flooring is divided into high, medium and low grades, and there are also high and low. If you want to buy the best quality flooring, pick the most expensive varieties of this brand, the quality must be the best, and then send you the top ten brands of flooring, you can go to their physical store according to the list to personally inspect the experience, choose the most suitable for your home to use the good flooring to buy, please adopt it.

It is difficult to be completely formaldehyde-free in a healthy formaldehyde-free manner, but the plates of Xiangliang board industry can be done very well, because of its green and environmentally friendly raw materials, its formaldehyde-free effect has been certified by many authoritative institutions at home and abroad.

In our usual life, many people have heard of formaldehyde-free boards, so although we are not unfamiliar with formaldehyde-free boards, but we are not very familiar with them. I hope it can help you, and interested friends can follow along to find out.

1. What kind of plate is formaldehyde-free plate?

1. The formaldehyde-free plate is actually also known as the non-right to add the board hole, and this kind of plate does not add any formaldehyde glue, but this does not mean that the plate without adding formaldehyde glue does not contain formaldehyde.

2. This belongs to a kind of man-made board, and its raw material is the wood itself, and the wood itself contains trace amounts of formaldehyde.

3. The MDI glue that will not release formaldehyde is used in the production of formaldehyde-free plates, and the formaldehyde-free plates themselves will not produce and release formaldehyde, and the formaldehyde will not be released at all in the plates, so that it will not cause harm to the human body.

4. There are many kinds of non-right boards, including high-end boards, solid wood multi-layer boards, and wheat straw pressed, which are relatively cheap, medium formaldehyde-free boards with low-end boards, higher and higher high-grade formaldehyde-free boards.

2. Identify the authenticity of formaldehyde-free plates.

1. When we identify formaldehyde-free plates, we can log in to the official **, and then enter the crack number of the plate, and check whether it is ** in the official **.

2. Up to now, no more than 300 companies have been certified in the world, so when you find it, you will see the company's name, certificate number and product type, if there are no these, it means that the formaldehyde-free board is fake.

The above is a summary of the relevant content and information about what kind of formaldehyde-free board is, I hope it can help you. If you have any other questions, you can leave a message at the bottom of the platform, and we will solve the problem for you in time. Finally, if you have any questions about home furnishing or home decoration, you can pay more attention to Qeeka Home.