What are the details of investing in aerated brick production line that need to be paid attention to

The aerated concrete production line is mainly composed of: aerated concrete cutting machine, jaw crusher, ball mill, mixing pouring truck, mixing pouring machine, mortar mixer, vortex pulping machine, spreader and mold, mold bottom plate, mold frame, steaming and curing car, column support.

Shuttle car, autoclave, boiler, single-beam single-hook crane, double-hook double-speed crane.

silo and other components.

The aerated brick equipment process is to add water to grind fly ash or silica sand, river sand and slag into slurry, add powdered lime, appropriate amount of cement and aluminum paste into the mold frame after stirring, and after static curing foam and solidification, cut into blocks or plates of various specifications, send them into the autoclave by steaming and curing vehicles, and form porous and lightweight concrete products after high temperature and high pressure steam curing.

There are many aerated brick manufacturers, the equipment of our aerated brick factory is bought in Henan Hualong Heavy Industry Machinery Factory, the products produced by the equipment are very good, and the after-sales service is also very good, you can inspect and investigate.

Investigation of the pre-market stage. Examining the market is the key to a successful investment. 2) Select the device.

What is the most important infrastructure of a brick factory, naturally is the equipment, there is no equipment that can produce high-quality products, so how can a brick factory run. 3) Pay attention to equipment maintenance. Why the quality of bricks produced by the equipment is unstable, it is because the equipment can not maintain high-speed production and operation, the brick-making production line belongs to the assembly line operation, and the problem will affect the later production.

This specific detail can be Deyi Heavy Industry, simply there are three aspects of the details of the problem is also the main aspect, other aspects should also be understood, always understand the comprehensive better.

The manufacturers of aerated brick equipment production line are: Youbo Luoke, Hangjia, Xujian New Materials, Jinyu Gas, and Guangzhou Development.

1. Youboluoke

UBO Luoke is a high-end aerated concrete brand, and a leading aerated concrete enterprise in the Asia-Pacific region integrating large scale influence, high brand reputation, rapid technological innovation and strong innovation ability. UBO Roke acquires the Yitong China factory and has several production bases at home and abroad, dedicated to the development and production of AAC panels and blocks that meet international standards, unit walls for construction and energy-saving materials for buildings.

2. Hanga

Founded in 1976, it belongs to Fuchun Holding Group, a domestic aerated concrete building materials manufacturer with a long history, and its main projects include high-quality AAC products (plates, blocks) and green building system housing integration services and overall solutions.

3. Xujian New Materials

Founded in 1996, the company is committed to the R&D and manufacturing of new green and energy-saving building materials and the upgrading and innovation of new prefabricated wall construction methods, and is a one-stop service provider for new prefabricated wall engineering.

4. Jinyu gassing

Set aerated brick production, research and development, sales and engineering services in one, the earliest domestic professional production of cracked gas concrete products enterprises, the main aerated concrete load-bearing blocks, insulation blocks, bonded blocks, roofing panels and other products, with light weight, high strength, energy saving, thermal insulation, sound insulation, fire prevention and other characteristics, the products sell well abroad, well received by consumers.

5. Guangzhou development

Founded in 1997, it is a well-known green and low-carbon energy provider in China and a large-scale state-owned asset authorized operating institution in South China, forming an industrial system in which power, energy logistics, gas, new energy, energy finance and other businesses support each other's development.

Aerated concrete blocks, referred to as aerated bricks, are aerated concrete blocks produced by high-temperature autoclaving equipment technology. "Aerated brick" can be understood as a simplified or generic name. The range of products it covers should be a little larger, i.e. bricks produced using various other processes, including autoclaving.

This kind of brick is produced by the aerated concrete equipment of Zhengzhou Deyi Heavy Industry, which is also the mainstream product of the building brick industry.

The aerated brick production line has always been pursued by investors, but there are not a few investment companies that have caused safety accidents because of failure to do a good job in safety training. Although any equipment carries certain safety hazards by itself, most safety accidents are caused by employee negligence. To give an example of a late draft, when the equipment is repaired and inspected, few people will pay attention to whether the power is turned off, and there is no special person to guard the power supply.

When entering the production workshop, there is no professional clothing. These may seem like hours to some, but when an accident happens, it's a big deal. Safety is no trivial matter, because many safety accidents are from small to big.

What destroyed most of the production floor? Fire. It is very necessary to do a good job of fire prevention between the car keys and the luggage.

Therefore, the workshop should always have a fire extinguisher, and it is strictly forbidden to smoke and carry fire to extinguish the danger. All kinds of noise will be generated during the production of equipment, which will not only disturb the people, but also cause certain health to employees, so investors must pay special attention to whether there is a noise reduction system to ensure low-noise production when buying aerated brick production lines. Pressure gauges and safety valves are places that people often neglect, but these negligent places must be inspected and maintained to avoid equipment damage and safety accidents.

The important thing is the establishment of the safety system, and the compliance of employees can only avoid danger by paying close attention to safety education.

The aerated brick equipment process is to add water to grind fly ash or silica sand, river sand and slag into slurry, add powdered lime, appropriate amount of cement and aluminum paste into the mold frame after stirring, and after static curing foam and solidification, cut into blocks or plates of various specifications, and steam and curing vehicles.

It is sent into the autoclave and cured by high temperature and high pressure steam to form porous and lightweight concrete products.

The aerated brick production line is mainly composed of: aerated concrete cutting machine, jaw crusher, ball mill, mixing pouring vehicle, mixing pouring machine, mortar mixer, vortex pulping machine, spreader and mold, mold bottom plate, mold frame, steaming and curing car, column support, ferry car, autoclave, boiler, single beam single hook crane, double hook and double speed crane, silo and so on.

Deyi Heavy Industry's aerated block equipment is doing well.

<> raw materials can be sand, fly ash, slag, etc.

**It contains production processes and equipment.

Yunsheng Heavy Industry provides reference.

Profit is the common pursuit of all manufacturers, and when choosing to invest in aerated brick equipment, it must be for profit. The amount of profit directly affects the development of the enterprise. As we all know, in today's rapid development of new wall materials, how to invest in aerated bricks in order to obtain the maximum profit?

What is the profit margin of investing in aerated brick equipment? I believe that these problems are a problem that every manufacturer is very concerned about. The profit of the products produced by aerated brick equipment is revenue minus cost, and we analyze it from these two aspects.

First of all, in terms of cost, aerated brick equipment is the project with the smallest investment, because of its unique production process, it does not need to use an autoclave during production, only natural steaming and curing, so in addition to the expensive steaming and curing kettle equipment, its investment is very small. The third is that it does not have high requirements for the site, so it can reduce a large part of the site cost, and the production scale can be large or small. The raw material used in production is industrial waste slag fly ash, although the fly ash in each region is different, but the fly ash is generally not high.

So in terms of cost, the cost of aerated brick equipment is the lowest.

In Henan, the sales of aerated bricks per cubic meter are about 220 yuan, and the cost price is 120 yuan, that is, the aerated bricks have a profit of about 100 yuan per cubic meter. The market prospect is very broad, and it can be seen that the profits are very considerable. Not only that, the production of aerated bricks does not produce waste water and exhaust gas, which can greatly save electricity and coal, and belongs to the new wall material equipment of environmental protection and energy saving.

It can also be seen that the production of aerated brick project has a small investment, high return and large profit, and is a project with good investment prospects. Deyi Heavy Industry provides project reference.

The aerated bricks produced have a wide range of materials, stable materials, high strength, light weight, easy processing, convenient construction, low cost, and good thermal insulation, heat insulation, sound insulation, and good fire resistance, so they have broad market prospects.

Now that more and more people are investing, what procedures do you need to go through to invest in setting up a factory? The first step is to register the factory name within three working days. secondly, the various required documents that should be submitted to apply for the pre-registration of the name of individual industrial and commercial households; Finally, it is the documents and certificates that should be submitted for the registration of self-employed individuals in the application for the establishment of aerated brick production lines.

In the second point, (1) the applicant's identity certificate or relevant certificate entrusted by the applicant; (2) Application for pre-registration of the name of individual industrial and commercial households; (3) Other documents and certificates that should be submitted according to regulations, rules and policies.

In the third point, it is necessary to pay attention: learn aerated brick equipment Shandong. (1) Proof of operating brick airport; (2) Partnership agreement for individual partnership; (3) Proof of the relationship of the family members who run the family; (4) Notice of pre-approval of name; (5) Application form for individual business registration signed by the applicant (fill in the application form for individual industrial and commercial households); (6) Proof of employees (the city's personnel must submit a household registration certificate, steel slag ball mill **.)

Including household registration booklet and ID card, as well as relevant certificates of retired and other unemployed persons; Personnel from other provinces and cities must submit their ID cards, temporary residence permits in Beijing, labor employment permits, business certificates in Beijing and junior high school or above; Women of childbearing age are also required to submit a family planning certificate; (7) Regulations, rules and policies should be submitted to the relevant brick machine special certificates. This is something that needs to be paid attention to in the construction of the factory.

Conditions for the construction of aerated brick production line.

1) Raw materials**The raw materials required for the production of ** are mainly fly ash, quicklime, gypsum, etc. These raw materials are required to be purchased within 100 kilometers of the plant, and the first fly ash must be of good quality and quantity.

2) Site selection and traffic conditions of aerated brick production line.

The following aspects should be taken into account in the selection of the site:01The factory can be located in the general industrial zone, with an area of more than 30 acres; 02.

There are no special requirements for geological conditions; -5m below as far as possible for the original soil layer, ground pressure resistance is not less than 18 tons of square meters; 03.There should be relatively convenient transportation conditions.

Electricity: The power supply of this project is planned to use 380V 50Hz power supply, which can meet the power demand of the production line, and the available cables are introduced from the trench or overhead line. It depends on the actual situation.

The installed capacity of this project is about 900kw, and Deyi Heavy Industry provides a full range of project design solutions.

Water supply and drainage: The production, living and fire water of the project adopts a diversion system, and the water source is tap water, which is connected to the original municipal water network system. The design uses a reuse water supply system to achieve zero discharge of production wastewater.

Gas supply: The gas source of this project is provided by a steam boiler, which requires saturated steam pressure and temperature of 200 degrees Celsius.

The geological data is partially detailed and provided by the geological exploration department.

3) Aerated brick production line others.

Fire protection: This project needs to complete the installation of fire hydrant systems inside and outside the building and factory area. Specifically, the design institute shall carry out the corresponding design in accordance with the relevant fire protection regulations.

Lightning protection and grounding: Within the scope of the factory, the workshops and buildings with a height of more than 15 meters in the milling workshop shall be equipped with corresponding lightning protection facilities such as lightning rods. All voltage equipment (non-charged metal shells, distribution protection steel pipes and cables) in each workshop should be reliably protected and grounded.

The lightning protection facilities and the protective grounding devices of each workshop should be connected to the total grounding network of the whole plant by grounding branch wires, and the grounding resistance should be less than 4 ohms.

The quality of aerated brick equipment is better in Henan, which belongs to Deyi Heavy Industry, the selection of equipment must pay attention to the selection of manufacturers who have passed the quality of the equipment, and there is rich experience in project construction, like those manufacturers who have been in business for a long time and have rich experience need to focus on the problems of automation of their equipment quality, and finally it is recommended to consider **, because a penny of price and a penny, a good product will have to pay the corresponding cost price, so it is recommended to consider carefully.