Is the skateboard not wet, and what to do if it gets wet?

Skateboard and roller skating are the same bearing driven, the bearing is absolutely not water, if the board body and sandpaper are stained with water in a large area, it will have an impact on the wooden material of the board, which will cause the plate interlayer to produce voids, and the hardness will decrease, there are many ways to deal with the water into the bearing, and the following two I commonly use: 1. Open the outer ring of the bearing (open on both sides) and use a hard tissue or glasses cloth to take up the water in the bearing, soak the bearing in the gasoline for half a minute (shake it), and then take it out and wipe it dry and wait for the gasoline to dry. Add bearing oil, if there is no professional bearing oil, you can process industrial machinery bearing oil, I use Yuzu brand professional roller bearing oil is very easy to use.

2. Use cleaning lubricant (available in motor vehicle repair shops) to spray the bearing two or three times after opening the cover directly, and then apply oil. These two methods are more affordable and easy to deal with, after a large area of the board body is dipped in water, wrap it in toilet paper and put it in a dry place to dry naturally, do not expose it to the sun, sandpaper as long as you feel that you are not slippery when you take the class when you do it, you don't need to change it.

The skateboard must not get wet. In particular, the bearing of the slide plate should not touch the water, because once the bearing encounters water, there will be rust, so that it can not slide smoothly in the subsequent sliding process, and it will also greatly shorten the service life of the slide plate. If the sandpaper of the skateboard gets wet, the sand layer on the surface will easily fall off, and it will be very slippery and dangerous on the sliding feet.

The slide plate is the same as the wheel skate, the bearing rotates, and once the bearing enters the water, it directly affects the working state of the bearing, and after the board body and sandpaper enter a large amount of water, it will cause the gap between the slide plate and the hardness will be greatly reduced.

Therefore, if you don't get wet when you are sliding, you should wipe the water clean in time, or shake the water dry. Moreover, it is best to drip some lubricating oil on the bearing after wiping it clean, so as to better maintain the bearing and keep it rotating flexibly. However, if there is a lot of moisture on the skateboard, it is recommended to remove each part with a screwdriver in time and wipe it again, so as to ensure that the moisture is completely dry.

And it is also necessary to check the anti-slip effect of the sandpaper, if the wear is more serious, it is recommended to replace the sandpaper with a new one in time.

The reason why the skateboard can not touch the water, is because once the bearing of the skateboard encounters water, there will be rust, affecting the smoothness of the slide, if the sandpaper is stained with water, the surface sand layer is easy to fall off, the feet will slip when sliding, it is very dangerous, the board body and sandpaper into the water, but also lead to the gap between the interlayer, the hardness is reduced, so to avoid the skateboard touching the water, do not play skateboard in rainy days.

The reason why skateboards can't touch water.

Skateboarding is a sport that is very popular with young people, generally speaking, skateboarding can not be wet, nor can you travel on a skateboard on a rainy day, because once the bearing of the skateboard encounters water, it will rust, and it can not be very smooth in the subsequent sliding process, shortening the service life of the skateboard.

If the sandpaper on the skateboard gets wet, the surface sand layer will easily fall off, and the feet will slip when sliding, which is a very dangerous thing in the process of skateboarding, and it is easy to get into accidents. In addition, the skateboard is the same as the roller skate, the bearing water will directly affect its working state, and the board body and sandpaper will also cause the interlayer to produce voids and reduce the hardness.

What to do if you accidentally touch the water on your skateboard

If the skateboard accidentally touches the water, you should quickly wipe off the water on it with a clean cloth, the bearing is water, and after wiping it dry, it should be sprayed with lubricant, and then oiled for maintenance.

1. Dip a rag in water, wring it out, and wipe all the dust on the surface. If there is frost paper on the surface, gently brush it with a brush dipped in water, absorb the water with a dry rag, and repeat several times.

2. Clean up the dust. You can see some glue marks on the board, and there will be glue marks after putting some stickers on it and then taking it off.

3. Generally speaking, it is easier to remove the glue marks with gasoline and asphalt cleaning agents, if you can't find them, we can use tape to glue off the glue marks, and stick them several times, and there will be few glue marks left.

4. Clean the bracket, wipe it with a moist rag, and scrape the stains that can't be wiped off with a knife, don't use too much force, so as not to scrape off the paint.

5. Then clean the bearing, remove the wheels first, wipe off the dirt with paper, and re-apply the lubricating oil to put the wheels up.

6. Finally, you can dry the cleaned skateboard.

1. Dip a rag in water, wring it out, and wipe all the dust on the surface. If there is frost paper on the surface, gently brush it with a brush dipped in water, absorb the water with a dry rag, and repeat several times.

2. Clean up the dust. You can see some glue marks on the board, and there will be glue marks after putting some stickers on it and then taking it off.

3. Generally speaking, it is easier to remove the glue marks with gasoline and asphalt cleaning agents, if you can't find them, we can use tape to glue off the glue marks, and stick them several times, and there will be few glue marks left.

4. Clean the bracket, wipe it with a moist rag, and scrape the stains that can't be wiped off with a knife, don't use too much force, so as not to scrape off the paint.

5. Then clean the bearing, remove the wheels first, wipe off the dirt with paper, and re-apply the lubricating oil to put the wheels up.

6. Finally, you can dry the cleaned skateboard.