What is the difference between Yarn Count and Density in foreign trade fabrics?

yarn count: refers to the number of yarn counts. For example, the imperial count is 20s, and the metric count is 10 nm.

density: refers to the density of the fabric, that is, how many inches are the warp and weft.

Let's take an analogy. The following description is found in the fabric:

40s*40s/133*72

The meaning is: warp count * weft count warp density * weft density.

Clear and detailed, right?

There are differences between yarn count and density in foreign trade fabrics in the following two aspects:

1.Definition: Yarn count usually refers to the yarn count of the fabric, that is, the thickness of the yarn that makes up the fabric, and its unit is usually the imperial count number (s) or metric count count (nm).

density, on the other hand, refers to the density of the fabric, i.e. the number of warp and weft yarns (per inch or meter), which is usually measured in inches or meters.

2.Effect on fabrics: The impact of yarn count is mainly reflected in the texture and feel of fabrics.

In general, yarns with a high count will form a more delicate and soft fabric, while yarns with a low count will form a relatively coarse, thick feel. density mainly affects the tightness and luster of the fabric. High-density fabrics are usually tighter and less permeable to light, while low-density fabrics are comparatively looser and tend to transmit light.

In summary, there is a difference between yarn count and density in terms of definition and impact on fabrics. Both of these parameters are important factors to consider when choosing fabrics.

Yarn count. Bilingual Bibian.

Words with Hui Dian Results:

yarn count [English] [jɑ:n kaunt] [beautiful] [jɑrn ka nt].

spinning the number of cotton yarn;

The above results are from Kingsoft Word Tyrant.

Interpretation of the net reed.

1.Yarn count.

2.Yarn counts.

3.Number of yarn counts.

yarn countYarn counts.

Yarn count. used to test yarn count and its strength.

It is used for yarn length, thread density and yarn strength test in the textile industry.

I'm glad to answer for you as soon as possible, and I wish you progress in your studies.

If you have any questions, please ask in time, thank you o( o

Spinning "cotton yarn branch disadvantage rock state jujube such as the number of rental sources, yarn count.

English] [jɑ: n kaunt] [American] [jɑrn ka nt].

That's usually the case.

The one above you is the warp and weft density (the number of yarns in the warp and weft within 10cm), but you give this n is the metric thread number.

Below is the yarn count (the larger the thread count, the finer the thread, the better.)"/2"It means that the two strands 120 2 are 2 120 strands, which is equivalent to a 60 strand, but 2 is stronger than 1, and this principle you should understand is the tensile force, yarn strength and other issues).

But the standard you give is curious, maybe I haven't done a foreign list, I don't know how to have such a big number.

dense adj.dense; thick; Stupid.

density n.Density.

In the spec, 70d+40d*70d+40d+140 is written

spec refers to specification. 70d+40d*70d+40d+140 is yarn counts, you didn't write out which ingredients, and I can't tell.

Density refers to density, 157*102 1 inch radial 1 inch has 157 yarns, weft has 102 yarns.

Hello, 70d+40d*70d+40d+140 in the spec is the yarn count of the fabric, but your cloth is rarely touched at present; 157*102 in density indicates the density of the fabric and is an indispensable element for the representation of the fabric.

yarn

English [jɑ:n] American [jɑ:rn]nyarn, thread; (in particular) wool; Tale; (Travel) anecdote viTell a story.

Where did this happen. I don't know what you do for foreign trade. At first glance, it may mean density: 18 grams per square meter.

Winding - the yarn is shaped into a cylinder on the winding machine [small at the top and slightly larger at the bottom] double twisting of the package yarn - the twist of the yarn is increased to a larger twist of the yarn on the double twisting machine - the package yarn from the winding machine [many packages one by one] is wound on the warp beam on the warping machine and is used for the warp yarn for weaving.

Reed - The warp yarn from the warping machine is not threaded on the reed of the loom after being sizing by the sizing machine, and is used to weave the required width and warp density on the loom.

Weaving - weaving a certain number of warp and weft yarns on the loom into the required warp and weft density and a certain width of cloth.

The floor is not very clear, probably the broken yarn or yarn is connected together winding, yarn, twisted silk in the cotton textile mill is not available, this is the term used for chemical fiber weaving winding - the chemical fiber yarn winding into a certain shape of the package.

Parallel - Twisting several silk threads into one silk thread.

Twisting – the silk thread after enhancing the twist on a double twisting machine.

These are all processes in a weaving factory, and you can see them all if you look at weaving. That's what I learned. Now in the fabric analysis.

The second floor is basically right. You should still look for this "Introduction to Cotton Weaving".