Car scissor door modification scheme price advantages and disadvantages

I saw the minimum 4000rmb on the Internet, there are two ways to change, one is on the original door hinge, the other is to find a new place and press it up, the former costs about 6000, because the parts have to be imported, the latter is cheap, but it can not be restored, and it will be a little troublesome to inspect the car after changing the door. Zhejiang may not have it, I also want to change, there seems to be no on the Internet, Since the beginning of this year, the hinged door lock of the car door has begun to implement the CCC China compulsory product certification, and it cannot be installed on the car without CCC certification. Please pay attention to this.

If the door is not modified well, it will seriously affect the safety of the car, and no matter how good it looks, it is not as important as safety, right? In addition, you should be careful when driving, safety first, after all, the body is your own, and you can't match the original parts if you break it a little, what do you say? I wish you a healthy and safe New Year.

The so-called scissor door, that is, its hinges on the front fender, get its name because the door opens like scissors.

The scissor door is straight up and straight down, with only one fulcrum.

In addition to the world-famous Lamborghini V12 engine sports car, there are also Contach, Diablo and Murcielago, all of which are representative of scissor doors. And some small cars, such as the Sera sports car launched by Toyota in the 90s, can give people an avant-garde and upscale feel.

The ** of the scissor door modified by ordinary cars is higher, about 20,000 coins.

To be honest, that Dongdong is good-looking and not easy to use, I can do it myself, does the so-called general-purpose type refer to spot welding? The kind of send you don't want to install,,I heard that the security is not good,If you use LSD,Even the installation may be about 1W4,I can also pull it now with it,But it's still that,,There's no practicality,It's just handsome,As for the air leakage problem,Because the car itself has a sealing strip,There will be no air leakage If you don't want to spend so much money,You can consider the domestic version of the imitation LSD,Even the installation is estimated to be more than 7000 on it。 ps:

If your car is still going to be driven by women, it is recommended that you do not change it, and it will be more difficult to close the door after the door is opened, and girls may have a hard time.

You can buy a modification kit **In the thousands, it is absolutely impossible to tens of thousands The advantage is that the car looks good, and the disadvantage is that when the door is closed after getting into the car, the door of the person who gets on the car does not look beautiful.

It costs 9,000-15,000 yuan to modify a door (different brands).

Most of the lifting parts used to change the scissor door are foreign products, and they should be booked from Guangdong. The lifting parts are divided into two categories: original and non-original, and the original installation of the original position is about 7,000 yuan to 8,000 yuan, but because of the simple installation, it only takes one day to get it; The ** of the non-original position only has 4,000 yuan to 5,000 yuan, but because its installation needs to be cut and welded, it takes two days to complete. When the reporter asked whether the modified car could pass the annual inspection of the vehicle management department, the staff member said that the wing door did not need to change the color, and it should be able to pass.

There are about 1,000 of the two friends, there are more than 3,000 and more than 4,000, and then the good ones are seven or eight thousand to more than 10,000!

I've seen the beauty of the leopard and the current state of the laughing generation of cool, I don't feel very good! The door is too heavy, not a long-term solution! Be careful!

Changing two should be around 6,000 yuan.

It is not allowed to modify, and it is illegal to modify the vehicle without permission.

Article 16 of the Road Traffic Safety Law stipulates that no unit or individual shall assemble a motor vehicle or change the registered structure, structure or characteristics of a motor vehicle without authorization; Changing the motor vehicle model, engine number, frame number, or vehicle identification number.

If you drive an illegally modified motor vehicle on the road, the public security traffic management department will detain the vehicle in accordance with the law, confiscate the illegal device, order it to be restored to its original state, and impose a fine of 200 yuan in accordance with the law.

For illegally modified mopeds, the public security traffic management department shall not issue safety technical inspection marks. If the speed exceeds the limit, the public security traffic management department will impose a fine of not less than 200 yuan but not more than 2,000 yuan in accordance with the law, and revoke the driver's license.

Yes, the modified mechanical scissor door is generally about 4000 yuan (the scissor door accessories are complete, installed, and painted);

If the body structure of the car is changed, the annual inspection will not be given, and it is necessary to apply for the record to the traffic management department, so that it is legal.

Retrofitting process of scissor door :

1.First of all, remove the fenders, door trim panels and related accessories on both sides;

2.Remove the upper hinge of the door, and the door must be closed in place when the hinge is removed;

3.Square the hinges of the scissor door to the frame girder, and find the installation plane of the scissor door kit; The model is different, the frame girders.

The structure is also different, and the lower façade of the girder and A-pillar of some models is uneven. First of all, the concave surface of the girder and the façade of the A-pillar should be processed to the level, and the positioning mark should be made after finding the best position, and the opening position of the limiting pin should be found at the same time;

4.Then do the preliminary fixing, first fix the scissor door hinge support seat on the girder and the A-pillar force surface, and connect the arm separately.

One end is connected to the inside of the door (on the original door hinge connection surface), and the fixed position of the two ends must be found to ensure that the door is closed in the future without water leakage, ash leakage, air leakage and abnormal noise. The position of the assembly line on the door of some models should be changed accordingly and simple adjustments should be made (such as: electric glass, central control, electric rearview mirror, door lights, etc.);

5.Remove the original lower hinge and open the door outwards to find the best opening angle (the hinge rocker arm cannot touch the wings.

sub-plate, so the inner edge of the fender of some models needs to be cut off in order to give way to the swing space of the rocker arm) and adjust the two limiting screws, and fix the inner and outer limiting pins at the same time, so that the cars must drive out to a certain angle to open, and must ensure that the door trim panel does not rub the A-pillar or the rest of the parts;

6.Lift the door upwards with the optimal opening and adjust the up-and-down opening angle to match the proportions of the shape according to the model.

degree, and then fixed by the limiting screw to create the most perfect visual effect; At this time, the adjustment must be adjusted to keep the door level and smooth when the door is opened and closed;

7.Once you have confirmed that there is no problem with the closing of the door, you can install the hydraulic struts. First find the position of the two support rods and install them.

Gap, use a thick 4 6mm iron plate to make the base of the strut, weld the base to the girder, and then punch the eye, fix one end of the strut on the base, and connect one end to the rocker arm, and the position of the brace must not be magnetic rub with any part when opening and closing the door;

8.Finally, fix all adjusting screws and limiting pins with fasteners;

9.Replace fenders and door trim accessories.

If your car is just modified for fun and not ready to hit the road, that's fine.

The state does not allow it.

It can be changed... However, there will be problems with the annual review. The scissor door is difficult to open automatically when it is dangerous. So it's not much allowed in the country.

Absolutely!! I have seen many cars that have been changed, such as Accord, Ma 6, Ruizhi, etc.

Yes, but the safety and airtightness will be poor. My friend's Coolpie had a scissor door... Water leaks when washing the car. -

No, if you modify the scissor door, you will get into a car accident.

Is it legal to change the scissor door of the car It is legal to change the door of the car to a scissor door, and the door needs to be changed to the traffic management department of the local public security organ after the modification, and the modified scissor door meets the third clause in the tenth article of the "Motor Vehicle Registration Regulations": "Replace the body or frame." "According to Article 10 of the "Motor Vehicle Registration Regulations":

If a registered motor vehicle has any of the following circumstances, the owner of the motor vehicle shall apply to the vehicle administration office at the place of registration for a change of registration: (1) changing the color of the body; (2) Replacing the engine; (3) Replacing the body or frame; (4) Replacing the vehicle due to quality problems; (5) The nature of use of a commercial motor vehicle is changed to a non-commercial motor vehicle or a non-commercial motor vehicle is changed to a commercial motor vehicle; (6) The domicile of the owner of the motor vehicle moves out of or into the area under the jurisdiction of the vehicle management office. @2019

It is legal to change the door of the car to a scissor door, and after the door is modified, you need to go to the traffic management department of the local public security organ to change the registration.

1. Who is responsible for being scratched by illegal parking?

A case-by-case analysis is required. If the illegal parking causes a scratching accident, the illegally parked vehicle must be held responsible, generally bearing secondary responsibility, and the main responsibility of the scratching party. If the car behind the car is directly scratched after the illegal parking, then the illegal parking of the car door shall bear full responsibility.

In the division of responsibility for traffic accidents, it mainly depends on what illegal acts both parties have, and as long as there are illegal acts, they must be liable.

2. What should I do if someone hits me when someone is driving the door?

If you hit the door of the car, you need to protect the scene and call the police in time. If the compensation for personal injury caused by a traffic accident is to first have the accident responsibility certificate issued by the traffic police department, and the responsibility shall be borne according to the proportion of the responsibility division of the traffic police force. If you have insurance, contact the insurance company as soon as possible.

The main scope of compensation includes medical expenses, hospitalization expenses, nursing expenses, nutrition expenses, lost work expenses, one-time disability allowance, mental damages, etc.

3. How many points will be deducted if you stop at an intersection.

If you stop at the intersection, you will generally be fined 200 yuan for 3 points.

Article 63 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China Motor vehicles shall comply with the following provisions when temporarily parking on the road:

No parking is allowed in road sections with no-parking signs and markings, road sections with isolation facilities between motorized lanes and non-motorized lanes and sidewalks, as well as pedestrian crossings and construction sections;

No parking is allowed at intersections, railway crossings, sharp curves, narrow roads with a width of less than 4 meters, bridges, steep slopes, tunnels, and road sections within 50 meters of the above places;

Before the vehicle is stopped, the door shall not be opened and the person shall not be allowed to get on and off, and the door shall not be opened or closed to obstruct the passage of other vehicles and pedestrians;

Roadside parking should be close to the right side of the road, motor vehicle drivers are not allowed to leave the car, get on and off personnel or load and unload items, immediately away;

City buses are not allowed to stop to pick up or drop off passengers on road sections other than the stops.

Article 44 of the Provisions on the Registration of Motor Vehicles If the number plate or driving license of a motor vehicle is lost, lost or damaged, the owner of the motor vehicle shall apply to the vehicle administration office at the place of registration for replacement or replacement. When applying, the owner of the motor vehicle shall fill out the application form and submit proof of identity.

The vehicle management office shall review the certificates and vouchers submitted, take back the number plates and driving licenses that have not been lost, lost or damaged, and reissue or reissue the driving license within one day from the date of acceptance, and reissue or reissue the license plate within 15 days from the date of acceptance, and the original motor vehicle license plate number shall remain unchanged.

During the period of reissuance and renewal of license plates, temporary driving license plates with a validity period of no more than 15 days shall be issued.