How to wash 502 to wash it off, and what to use 502 to wash it off

How to wash off the 502 glue on your hands.

1. If we accidentally stick 502 glue on our hands, because 502 glue is a surface adhesive and does not have permeability. It is best to leave it alone for a maximum of a day and a night, and it will naturally peel off as the metabolic ** surface cells are shed.

2. Although acetone can remove 502 glue, it is toxic, and it is more suitable for cleaning clothes. In fact**you can pick it off after a day, and if you cut it hard, it will hurt**. This trick has been taught on TV, even if you use nail polish remover, you can clean it up.

Principle: The composition of glue is the same as nail polish.

3. If you accidentally stick 502 glue on your hands, you can use the bath stone to exfoliate your feet in the kind of bath set that you can usually buy in the supermarket, get some soap and wipe it, or you can only work more and wash your clothes.

4. Use banana water (you can also use nail polish remover, most of the raw materials of nail polish remover come from banana water.) It is best to use nail polish remover, because banana water is more toxic, and nail polish remover is relatively safe) to drop on the glue stains, and at the same time use an old toothbrush to constantly stir and brush, wait for the glue traces to become soft and take off, and then rinse with water, and repeatedly brush and scrub until it is clean. Put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it clean with cotton dipped in water.

How to wash off 502 glue on clothes.

1. Use banana water to drop on the 502 glue stains of the clothes, and then use a brush to keep brushing the glue stains, after a period of time, the glue will become soft and fall off from the clothes, then rinse with water, and then dry it.

2. Because the solvent of 502 glue is acetone, as long as the clothes stained with 502 glue do not contain acetate, acetone can be used for cleaning, because if 502 glue sticks to acetate, the fiber will be dissolved, which will cause holes.

3. Use insulating oil, but it is difficult to find insulating oil, generally in the transformer, the insulating oil effect is very good, 502 glue can be softened quickly, and then directly washed off.

How to wash off a dry 502.

The 502 can be washed off using the following methods:

1. Insulating oil: pour a little insulating oil on the solidified glue, and the glue will soften quickly and can be removed.

2. Nail polish remover: Wipe it lightly with cotton, and the glue can be washed off.

3. Wind oil essence: apply it to the glue with wind oil essence and let it stand for 1 minute to remove.

4. Gasoline: Soak some gasoline and gently scrub it to remove.

How to use 502 glue:

1. Clean the surface of the adhered object before use, remove the dust, oil, rust, etc. on the surface, and when bonding the metal, it is best to grind it roughly, and activate the surface of PE, PP and other plastics.

2. Open the front cover of the glue bottle, and gently buckle the tip with your fingers so that there is no residual liquid, and then cut out the hole with scissors.

3. Drop a small drop of this glue on the surface of the adherent, immediately bond, and keep it until it hardens, of course, the bonding area should not be too large.

4. Wipe the glue bottle clean after use, cover it tightly, and store it in a cool and dry place or refrigerated.