There are several types of styrofoam, and there are several things that can make styrofoam mold

Styrofoam is a kind of entertainment product, mainly made of glycerin, water, borax, it has the characteristics of soft, foaming and so on. The styrofoam production method can be divided into four steps, firstly, glue and a small amount of glycerin are poured into the container; Then add the shaving foam; Then add water and stir, the water and glue are 1:2;Finally, add a small amount of borax water several times, stirring as you go.

There are 3 materials needed to make foaming glue: water, glue, and borax water.

Method Steps:

1. When making, the ratio of water and glue is very important, and the ratio of water and glue should be kept at about 1:2 as much as possible.

Sogou asked. 2. At the same time, when stirring in the later stage, it is necessary to adjust the proportion according to the situation, add materials with foaming effect for stirring, and add borax water for final solidification treatment after roughly completion.

Sogou asked. 3. At this time, if the styrofoam is hard, you can add additional water, add water and glue according to the situation when stirring, you can adjust the softness and hardness, if it is relatively dry, it is best to add some glycerin, which is more comfortable to play.

Sogou asked. 4. In the production process of styrofoam, the proportion needs to be reasonably adjusted in order to produce a suitable soft and hard styrofoam toy.

Sogou asked. Precautions.

1. Finally, when you don't play, you can find a box and seal the styrofoam to prevent the moisture in the styrofoam from drying out.

2. If the foaming glue sticky hands can usually be combined with nail polish remover and shampoo first, and scrub repeatedly, and at the same time, you can choose hand cream, the oil is relatively large, reduce the strength of the foaming glue, etc., which can effectively remove the foaming glue sticky hands.

For styrofoam, the presentation of form is very important. Some types of styrofoam have wrinkles around the edges, resulting in a decrease in aesthetics. There are also some styrofoams that show a good shape, smooth and flat, and are very beautiful.

Why does styrofoam take on a different shape?

In this case, it has a certain relationship with the quality of the styrofoam itself, and it also has a lot to do with the material of the application object. For example, when used in plastic materials and metal materials, the form presented is very different. In order to ensure a better form, we should cooperate with powerful brand leaders, such as Cosmore, focusing on styrofoam research, providing customized styrofoam application solutions, which can be used in new energy, military industry, medical, aviation, shipbuilding, electronics, automobiles, instruments, power supplies, high-speed rail and other industries.

How is styrofoam stressed during the bonding process?

When a styrofoam is slowly cured from the material to form a film, the hardness slowly increases, and the properties of the cohesive strength will also change. When the cohesive strength increases, the force strength of the adhesive film increases. At this time, it will exert its own strength, resist the intrusion of external forces, and play a protective role in the application object.

Is styrofoam reliable?

During use, the application object may be affected by external forces such as compressive force or tension. At this time, the high-quality styrofoam can exert super pressure resistance and reduce the strength of the protected object affected by external forces. Just imagine, if the styrofoam itself is not strong enough, the adhesion is not good, it will not take long to break or collapse, can not play a good protective function, how to continue to use?

This reminds users that different types of styrofoam have different bearing capacity and different strengths. Only by using reliable styrofoam can it resist external forces for a long time. Even if it cannot be 100%, it must resist the interference of most external forces, so that the application object can be used for a longer time and save costs.

There are several things that can make styrofoam molding: 1. Method one (1) first take a clean container with a lid (it is recommended to use a disposable box); Squeeze some of the dish soap into the container. (2) Squeeze some more toothpaste into it and add a little water.

3) Close the lid of the container and shake vigorously until it bubbles. (4) Add a small half box of glue and squeeze in some hand cream and mix well with a spoon. Because Thermo Pin Hand Cream is pink, we don't need to add any extra color here.

5) Finally, add the laundry detergent and mix well with a spoon until the styrofoam is formed. 2. Materials required for method 2 (1): water, glue, glycerin, makeup remover, appropriate amount of water.

Prepare water and glue in a ratio of 1:1 (you can add a little pigment to the glue). (2) Pour the prepared ingredients into a bowl.

3) Pour in a little cleansing water (to prevent sticky hands). (4) Use a tool to stir the ingredients in the bowl well. (5) Add an appropriate amount of glycerin during the stirring process (it can prevent the made styrofoam from becoming brittle).

6) Add a small amount of fairy water several times until the lead section volume solution is no longer in a dilute state. (7) Take out the thickened lump and stretch your hands constantly. (8) Overlap and rub until it is no longer sticky.

9) Once the styrofoam is formed into a complete shape, it means that the production is successful.

Materials required: appropriate amount of toothpaste, appropriate amount of facial cleanser, appropriate amount of water, appropriate amount of glue.

1. Squeeze an appropriate amount of toothpaste into a small bowl.

3. Add water and stir.

4. Pour into a box with a lid on the branches of the filial piety feast.

5. Put in an appropriate amount of facial cleanser.

6. Shake the box.

7. After foaming, pour it back into the small bowl of Xiangzheng.

8. Add glue and stir well.

9. Turn it into a solid form.

The hottest styrofoam is introduced as follows:

1. Mudding.

Reason for listing: Mu Ding Ding adheres to the tenet of "integrity-based, customer first", and adheres to the business and sales philosophy of "quality-oriented, excellence", and strives to provide customers with a full range of high-quality services at the same time, but also enables the company to achieve rapid development.

2. Morning light. Reason for listing: Shanghai Chenguang Stationery Co., Ltd., a well-known brand of water-based pens, a well-known brand of stationery, a famous trademark in Shanghai, a listed company, one of the largest pen-making enterprises in China, one of the largest stationery production bases in Asia, and a comprehensive stationery group focusing on stationery.

3. Zhigao. Reason for being on the list: well-known (famous) schoolbag brand, well-known (famous) stationery brand, Guangdong famous trademark, Guangdong famous brand product, is a high-tech enterprise integrating product development, production and sales, and an influential brand in the stationery industry.

The products cover rotary pens, colored clays, styrofoam and so on.

4. Zhigao. Reason for being on the list: well-known (famous) schoolbag brand, well-known (famous) stationery brand, Guangdong famous trademark, Guangdong famous brand product, is a high-tech enterprise integrating product development, production and sales, and an influential brand in the stationery industry.

The products cover rotary pens, colored clays, styrofoam and so on.

5. Kaleyou.

Reason for being on the list: Shanghai famous brand, high-tech enterprise, the largest comprehensive stationery merchant in China, and a large-scale stationery enterprise group integrating production and sales. A children's brand specializing in ultra-light clay, with second-to-none safety quality, industry-leading innovative design and professional application content development.

The main role of styrofoam is entertainment, because the feel is relatively soft, there will be bubbles, so it is more sought after and loved by young people, and the do-it-yourself production is more playable, and there will be some decompression effects.

Styrofoam is mainly made of glue and a care solution that is easy to bubble plus some borax, because the fluidity is better, and the color after adding pigment is also better, so it is more popular with young people, and it will make people feel more relaxed in the process of pinching styrofoam, so some people will also use it to decompress.

Because the production process of styrofoam is relatively simple, it can generally be done at home, of course, you can also choose to buy some products outside, and try to choose to buy more regular stationery stores when buying, so as to ensure that the products are safe, non-toxic and more environmentally friendly.

If you do it yourself, you need to buy some glue and other materials, choose Chenguang's transparent glue, borax, pigment, shower gel, and mix them together until the bubbles are not sticky. It is relatively safe to make your own styrofoam, and it can also enhance your hands-on ability. It should be noted that you should pay attention to the cleanliness of your hands after playing.