What is the difference between E0 and E1 plates

The difference between environmental protection E1 and E0:

1. The formaldehyde content is different: the formaldehyde content of E1 grade is mg L; The amount of formaldehyde in E0 level is mg L, and the formaldehyde emission is almost negligible.

2. **Different: Because the environmental protection standard of the E0 level is higher than the environmental protection standard of the E1 level, the building materials that meet the E0 level are higher than the building materials of the E1 level.

3. Different levels of standards: E1 environmental protection standards are national mandatory health standards, while E0 environmental protection standards are the highest international health standards, and European countries mostly use E0 standards.

Summary. 2. Different environmental protection: the formaldehyde concentration contained in E0 grade will be lower than that of E1 grade, and E0 grade plate is more environmentally friendly than E1 grade.

There is no way to tell the difference with the naked eye.

He is only different in terms of environmental protection and standards: E0 is a European standard, and E1 is a domestic standard. Comparatively speaking, E0 enforces stricter standards.

It is commonly referred to as more environmentally friendly, but the so-called E0 level is sometimes just a rhetoric, and you should try to look at the relevant documents when buying.

2. Different environmental protection: the formaldehyde concentration contained in E0 grade will be lower than that of E1 grade, and E0 grade plate is more environmentally friendly than E1 grade.

Compliance with the E0 standard indicates that it has reached the top international environmental protection standard, and the formaldehyde emission is almost negligible. However, the E0 grade board does not contain green moisture-proof agents and does not need to be glued, so its toughness and moisture-proof ability are relatively low. Therefore, products that meet the E1 level of environmental protection indicators can be called environmentally friendly products.

Difference Between E0 and E1 Plates:

1. The standards are different.

E0 is a European standard, E1 is a domestic standard, E0 is relatively stricter than the implementation of standards, that is, it is usually said to be more environmentally friendly, but the so-called E0 level is sometimes just a rhetoric, try to look at the relevant documents when buying.

2. Environmental protection is different.

The formaldehyde concentration of E0 grade will be lower than that of E1 grade, and E0 grade board is more environmentally friendly than E1 grade board.

3. The detection area is different.

China's floor inspection area is 180C; , surrounded by aluminum foil, only the surface is exposed, and the room temperature can be detected. e1 ( .

The formaldehyde emission of E1 grade must be less than or equal to, and it can be directly used indoors; The previous formaldehyde emission standards for wood-based panels were only E1 and E2, and the formaldehyde emission of E2 panels must be less than or equal to, and the surface of the product can be used in interior decoration after being finished.

In the newly issued national recommended standard, the formaldehyde emission of blockboard has increased the new standard of EO level - formaldehyde emission is less than or equal to, aiming to control the formaldehyde emission of wooden products, so as to reduce the pollution of the room and protect the health of consumers.

In fact, we all know that the reason why EO grade is more environmentally friendly than E1 grade is that less glue is used, and less glue will appear poplar veneer and the inner layer (the inner core of the woodworking board) The adhesion is not strong, and the surface of the skin board (poplar veneer) is easy to fall off, so it is recommended to pay attention to it during construction!

According to the national environmental protection regulations, the environmental protection level of the indoor panel must reach the E1 level to be considered standard, that is to say, it is safe and environmentally friendly, so it will not cause harm to the human body. While recognizing the quality of the board, we should pay attention to the formaldehyde emission of the board used in the furniture. The E1 environmental protection standard is a national mandatory health standard, and it is a mandatory "safety standard line".

e1<=, that is, the formaldehyde content is in line with the national standard, is environmentally friendly, and is harmless to the human body.

2. Environmental protection level E0.

E0 level is an international standard and is environmentally friendly, which means that the release concentration of free formaldehyde contained in each liter of space is in line with international standards. The formaldehyde content in the E0 level is already a safe numerical standard. According to relevant information, the formaldehyde content of drinking water is, that is, the formaldehyde content of the E0 level standard is less than that of drinking water.

The differences between E1 and E0 are as follows:

E1 is an international and domestic standard, and E0 is a top European standard.

The formaldehyde content of E1 grade is mg L (in line with European standards), and the E0 grade contains the least amount of formaldehyde, mg L (which belongs to the world's top standard).

E0 grade board does not contain moisture-proof agents and does not need to be glued, so its toughness and moisture-proof ability are relatively low. E1 grade plates contain a small amount of glue and are relatively tough.