vi VO mobile phone water into the machine, what software to use?

Mobile phone water treatment method:

1. Shut down immediately.

If the phone falls into the water, you need to salvage the phone immediately, and quickly press the power off button to turn it off, if it is a detachable phone, then we can take out the battery, memory card, etc. first. Powering off your phone first will prevent your phone's battery from being short-circuited**. If the phone is dropped vertically, it is best to pick it up vertically.

2. Remove moisture.

After scooping up the phone, you need to wipe the surface of the phone with a clean towel and other items, and then wipe the earphone jack and other parts with a fine cotton swab. Do not shake your phone dry too hard, as this may allow water from the surface of the phone to seep deeper into the area.

3. Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air in the process of using the hair dryer, keep a certain distance between the hair dryer and the mobile phone, it is best to let the wind blown out of it close to room temperature, do not direct the air outlet of the hair dryer to the mobile phone, usually the hair dryer blows the mobile phone for about 20 minutes.

4. Drying treatment.

Next, we're drying the phone. Rice has good water absorption, we can wrap the phone in a paper towel and put it in the rice. Usually sealed and stored for 12 hours is fine.

Generally, if the mobile phone is not flooded for a long time, it can be turned on normally. We can also put the mobile phone together with desiccant, drying box.

5. Check your phone.

If the mobile phone can be turned on normally, then we need to check whether the parts of the mobile phone can be used normally, for example, whether there are traces of the screen of the mobile phone, whether its earpiece, microphone, and speaker can be used normally, whether the camera of the mobile phone can take pictures, etc.

6. After-sales maintenance.

If the phone has been soaked for a long time, or the phone cannot be turned on after treatment, we had better send it to a professional for repair.

Summary: It is best not to press any button on the mobile phone before it is thoroughly dried, and do not frequently switch on and off the test to prevent damage to the mobile phone due to short circuits and other reasons.

When the phone gets into the water, gently wipe it with a dry towel, then lay it flat on the table and dry it slowly with a hair dryer, or wrap it in toilet paper and put it in rice for half a day.

The mobile phone must be disconnected from the power supply when it enters the water, and it can not be used continuously, and it is placed on the balcony to dry, generally 3 to 4 days to dry, if you are not at ease, use a hair dryer to blow again.

What should I do if my vivo phone gets into water? Here are 4 ways to deal with emergencies.

1. Don't shake your phone too hard.

After the vivo phone gets into the water, do not shake the phone vigorously to prevent the liquid from further penetrating into the inside of the phone, it is recommended that you use dry towels, paper towels and other tools to absorb the liquid as much as possible.

2. Shut down immediately.

Turn off your vivo phone immediately and remove the SIM card and SD card in time. If your phone is turned off, don't try to turn it on.

3. Adjust the placement of the mobile phone.

Before sending your phone for service, place the screen of your phone facing up and the handset at an angle at the high end.

4. Do not heat and bake the mobile phone.

Finally, the above is an emergency solution, it is recommended that you send your mobile phone to the vivo customer service center as soon as possible.

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

What should I do if my phone gets water? You must know this first aid method!

Mobile phone liquid inlet treatment method:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Bring your mobile phone and purchase voucher to the customer service center for processing, customer service center address: enter vivo official website vivo**app--my-service outlets or vivo official website web version--bottom - service support--service outlets query--select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

1.Shut down in time.

The reason why people are worried about the mobile phone falling into the water is that after the water enters the mobile phone, the motherboard of the mobile phone will be burned out, so that various faults and problems will occur. Therefore, at the moment when the mobile phone falls into the water, it is necessary to take the mobile phone out of the water at the fastest speed in your life, and then if the mobile phone is still on, you must turn it off immediately.

2.Wipe dry.

After turning off the phone, use a towel or paper towel or other tools that can absorb water to dry the water on the surface of the phone, and as for the headphone jack and charging hole, you can use a small cotton swab to absorb water. It is best not to use the hot air of the hair dryer to blow directly at the mobile phone, as the high temperature can easily damage the internal parts of the mobile phone.

3.Send it for repair.

After a simple "care" of the phone, the fastest and safest way to send it to the repair shop for repair, because the shorter the time of water ingress, the least chance of damage to the phone. Of course, there are many users who are reluctant to pay for this repair, and decide to use it directly after simple treatment, if you are lucky, the water does not enter the phone, but on its surface then there is no problem. But if you're unlucky, then you might get your phone scrapped, and it's up to you to choose.

If the phone is scrapped, then you have to buy a new one.

The mobile phone can be treated as follows:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Please bring your mobile phone to the service center for processing; (Vivo customer service center address inquiry method: enter vivo official website vivo**app--my--outlet query or vivo official website web version--scroll bottom--service support--service network query--select the province and city to query the customer service center address; ）

I believe that many friends will put the water into the water after the mobile phone in the box, and then use rice to spread it, wait for 12 hours, we can go to buy a new mobile phone, who told you that the mobile phone into the water with rice? That's because unscrupulous traders want to sell more mobile phones, so they taught you to do it.

Let me teach you some correct methods, and you must not believe these rumors. The water ingress of the mobile phone is mild and moderately waterlogged.

Mild water ingress solution: Mild water accumulation means that after your phone falls into the water, it is fished out within five seconds and the phone is turned on. We only need to use a paper towel to absorb the water on its surface, and then use a cotton swab to absorb its charging port, as well as the water in the earpiece, at this time the phone is turned on, we must not touch it, we put it in a ventilated place for two hours.

If the phone does not enter the shutdown state by itself, then we can carefully test all aspects of the phone's functions, and then try to record**, to see if he is hot, if the phone is not hot, it means that there is no water in the phone, and you can use it with confidence.

Solution to heavy water ingress: When our mobile phone is heavily flooded, the mobile phone is turned off or restarts all the time, or the mobile phone obviously feels abnormal. In this case, we must not shake the phone too hard, because if you shake the phone, the water droplets will spread to the CPU, and the phone will not be saved.

In addition, don't put it in this rice, the moisture in the mobile phone can't get out at all, and the dust of the rice will also block the earpiece and the speaker, so that the moisture can't be dissipated, causing your mobile phone parts to corrode, so that your mobile phone is more difficult to repair.

The correct way to deal with it is to gently pick up the phone, if it is automatically turned off, I don't care, if he is not turned off, we need to manually shut down, do not take the initiative to charge, and then according to the above, we wipe the surface water dry, and then we send it to the maintenance master as soon as possible; We don't have the conditions to send the maintenance master, we can use the hair dryer at home to turn on the hot air, and then turn on the minimum wind speed, put it on the mobile phone, bake slowly, bake for at least two hours, and wait for the mobile phone to dry completely, we try to turn it on, if it still can't be turned on, we send it to the maintenance master as soon as possible.

Turn off immediately, you can shake it a few times with appropriate force, throw the water to the headphone hole or charging hole as much as possible, and then blow it with a hair dryer, don't start it immediately after it's over, try again after a while, it's really not good, then you can only send it for maintenance, but that is not 100% safe.