How to maintain the Honda Binzhi to zero, and how to reset the 19 Honda Binzhi maintenance lights?

If the Honda Binzhi maintenance is reset to zero, it is recommended that you go to the local professional repair shop or 4S shop to let the master use the computer to help you reset to zero.

Hello, Honda Binzhi's maintenance clearance can be cleared by pressing and holding the button on the dashboard without moving!

If the Honda Binzhi maintenance is reset to zero, it needs to be maintained in the store, and it will be connected to the computer after the maintenance is completed.

Hello, if you want to maintain the light of this car, you can open your manual and see that there is a detailed operation on it, or you can go to the 4S shop and reset it with a computer.

Hello, Honda Binzhi This car maintenance light is zero, you need to use a computer to eliminate, it is recommended to go to the 4S shop.

Hello, if the maintenance light of this car is zeroed, this needs to go to the 4S shop after maintenance, and let the staff solve it.

This needs to be maintained when a special computer is used to eliminate, if you forget this, it doesn't matter, it does not affect normal use.

Reset with the operation key on the instrument cluster.

The operation method is shown in the following figure:

1. Turn off the engine of the Honda car, press and hold the "Reset" button after the side motor is turned off.

2. When holding down the reset button, insert the jujube key before removing the socks to start the engine.

3. Release the "Reset" button after the vehicle starts, and press the "Clock Adjustment" button once.

4. At this time, the maintenance cycle light is in reset mode, and the normal view will be restored after a few seconds.

5. After the reset is completed, you can check the interval mileage from the next maintenance, the method is: press the "clock adjustment" button 4 times, and the multi-function display will display the interval mileage from the next maintenance.

Summary. Hello, this Honda Binzhi maintenance light reset method, step 1 turn on the key and press the instrument to power on, step 2 press the button in the upper right corner of the instrument and press and hold on, step 3 when the instrument shows the number of maintenance kilometers, when the symbol is flashing, release the button, step 4 press the button twice in the upper right corner of the instrument, and then turn off the key, and then turn it back on.

Hello, happy to answer your questions.

Hello, this Honda Binzhi maintenance lamp reset method, step 1 open the key and press the instrument to power on, the second step is to press the button in the upper right corner of the meter, and press and hold the button, step 3 When the meter shows the number of maintenance kilometers, when the symbol is flashing, release the button, step 4 press the button twice on the upper right side of the instrument, and then turn off the key, and then turn it back on.

First press and hold the long button in the upper right corner of the meter to prevent Qin from being released, and then wait until the envy of the maintenance prompts the brother when the slide source mileage is flashing, and then release it, and then press the upper button twice.

No way. After you press and hold it, will the display of the maintenance kilometers flash there? Yes. Yes.

If it does, you can wait for it to blink and then release the button, and then press the button twice in a row.

Ok thanks.

OK.

1. Start the vehicle first and press the start button, see the figure below.

2. Take a look at the dashboard, and there will be maintenance tips, see the picture below.

3. Press the steering wheel.

set key, see the image below.

4. Press the SEL button on the right side of the steering wheel again, see the figure below.

5. Press the cancel button on the steering wheel again, see the figure below.

6. The maintenance wrench on the final dashboard of Zhenchun.

The hint is gone, see the image below.

1. Start the vehicle first and press the start button, see the figure below.

2. Take a look at the dashboard, there will be maintenance tips, and see the Xiaodan letter map for late sales.

3. Press the steering wheel.

set key, see the image below.

4. Press the SEL button on the right side of the steering wheel again, see the figure below.

5. Press the cancel button on the steering wheel again, see the figure below. Clever wheels.

6. The maintenance wrench on the dashboard at the end.

The hint is gone, see the image below.

Explain that your Dodge vehicle should be serviced but not on time. Once the prompt appears, even if you do maintenance, this disturbing tip may still be displayed on it, go to the four S store, let Suisen, the staff help you eliminate the slow family Bu on it.

Pacific Automobile Network] Binzhi has maintenance to zero. The method of zeroing the maintenance light of Guangqi Honda Binzhi is: 1. Turn on the ignition switch and do not start the engine; 2. Press and hold the A button on the dashboard, and press the brake pedal at the same time; 3. After three dots appear in the position of the instrument prompt character, hold it for three seconds; 4. Release the A button and brake pedal after three seconds; 5. Turn off the ignition for three seconds, and then turn on the ignition.

Turn off the ignition, press down the upper button on the right side of the instrument panel, and hold it for 3 seconds to turn on the ignition switch, and release the button after 10 seconds to complete the zero operation.

The lighting of the maintenance light indicates that the maintenance time of the vehicle has reached for a cycle and needs to be maintained in time. Not all models can be manually cleared, and some models need to be cleared by the manufacturer's special instrument. Although the mechanical life of the vehicle is longer than before, the maintenance of some important parts should still be carried out as scheduled, which is also to reduce the maintenance cost in the later stage.

If you often drive on roads with bad environments, you should go to the 4S shop for maintenance in advance.

Based on the Honda ConceptV concept, the headlights are angular, with sharp body lines, concealed rear door handles, and a lower center of gravity. The side of the body is designed with an upper and lower waistline, which gives the car a very slender look. In addition, the exterior door handle is finished with chrome elements, which looks slightly sophisticated.

Photo by Pacific Automobile Network Q&A).

Honda Binzhi maintenance light clear method.

1. Press the "A" button lightly, step on the brake plate, both of which can not be released halfway.

2. The car engine cannot be run, but the power supply of the vehicle must be turned on.

3. At this moment, the dashboard or identifier in the car flashes.

4. Keep pressing down the zero button "A" until "...Happens on the monitor.

5. Release the brake pedal and the "A" button.

6. Turn off the power of the vehicle and clear the maintenance lights.

Guangzhou Honda other models model maintenance light removal method one.

1. Shouting the car engine on fire.

2. Press the "trip" button and don't let go, and when you see the kilometers and its "oillife" flashing, relax the button.

3. There are some models that must be constantly pressed and released several times before the wrench light can be removed.

Guangzhou Honda other models model maintenance light removal method two He pants.

1. The switching power supply of the vehicle is in ON mode.

2. Continue to press and hold the (indicate information) button until "maintenance" occurs on the monitor.

3. Then press and hold the "Enter" key, and the dashboard in the car will produce information such as the car oil monitor.

4. Finally, press the "Enter" button for about 10 seconds, and the Honda Civic car oil wrench will be cleared.

The flashing of the maintenance light indicates that the maintenance room of the vehicle has reached a certain period and needs to be serviced immediately. Not all models can be manually cleared, and some models must be cleaned by equipment commonly used by manufacturers.

The equipment life of the vehicle is much longer than before. However, the maintenance of some key components may be carried out on schedule, which is also to reduce the maintenance cost in the middle and later stages. If you often drive on the road in a difficult environment, you should go to the car 4S shop in advance to carry out maintenance.

Millions of car purchase subsidies.

The Binzhi is Guangqi Honda's first SUV model, which was developed by Honda's new model platform and launched in October 2014. It is the third global strategic model introduced by Guangqi Honda, so what is the method of zeroing the maintenance lamp of Honda Binzhi? Let's take a look at the detailed explanation of Che Encyclopedia.

Simple way to do it.

Honda Binzhi maintenance light zeroing is actually quite simple. First, press the A button on the dashboard and press the brake pedal. When the maintenance warning light on the dashboard flashes, press the A button and keep the brake pedal pressed.

When there are 3 dots on the dashboard, all operations are released after 3 seconds, and then the ignition is turned off and turned on, that is, the elimination is successful.

Tips for caring for your lights.

When the car's maintenance light is on, it means that the car needs to be serviced in time. It is a good habit to disassemble and maintain the lights after car maintenance. Every 5,000 kilometers driven, the car needs to be serviced, and the parts that must be serviced each time include the engine oil and the oil filter element.

In addition, it is important to replace the gasoline filter, air cleaner, brake fluid, and coolant.

Abundant power performance.

Honda Binzhi is a car with a lot of power performance. The new car is equipped with an in-line four-cylinder turbocharged axle motor. This engine has a maximum output of 130kW, maximum torque, and is accompanied by a CVT continuously variable transmission, which accelerates to 100 kilometers in only about seconds, and the abundant power performance mainly copes with any road conditions.

According to the content of the Honda Binzhi maintenance lamp zeroing, it can be seen that the operation of zeroing is very simple.